Template:Rms manual management commands update fw
To Update firmware firmware for device(s) selected from your device table go to the RMS web page, Left sidebar panel, (Management → Overview) and click on Overview submenu.
Move your mouse pointer to the Top control Actions menu and select Update firmware (Actions → Update firmware).
Watch the instructional GIF below to learn how to update firmware for your device(s).
Step by step instructions
Read step by step instructions to learn how to update firmware for your device(s).
- Select the device(s) that you wish to update
- Move your mouse pointer to the Actions menu and click "Update firmware".
- After a pop-up window will appear. Select the latest firmware or factory firmware from the top of the list. You also can select the firmware you have previously uploaded.
- Click Select, you will get a pop-up window showing firmware upload progress.
- After the firmware upload is complete you will get ✔ Done in the Status column.
- You can safely close the pop-up window by clicking Close button.
- Allow some time for your device(s) to update. They wont be reachable for up to 1-2 minute(s).
- When the ⬤ red circle (Offline) will change to ⬤ green circle (Online) the device(s) have been updated and now are fully operational.
Your router(s) will be unreachable for a few minutes and will thus be shown as "Offline". The power button symbols located next to each device in the device table indicate the monitoring status of these devices. When it turns green, the firmware updates will have finished and the router(s) will be seen as "Online" in RMS.
Download firmware manually
Firmware files can be uploaded to RMS via the RMS Files tab for later use (more information here) or they can be selected from your computer. You can download firmware for different devices from these links: