Template:Rms manual management configuration my alerts

From Teltonika Networks Wiki
Revision as of 15:23, 5 February 2021 by RytisB (talk | contribs) (→‎Instructions)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

The Device alerts purpose is manage alerts that were created for the selected device in the RMS. To manage alert(s) go to Left sidebar panel (Management → Devices) and click on Devices submenu.

Move your mouse pointer to the Top control Alerts menu and select Device alerts (Devices → Device alerts).

RMS-device-menu-left-sidebar-panel.jpg RMS-top-menu-alerts-device-alerts.png


The Device alerts function is used to view and delete already existing alerts on a device.

Instructions[edit source]


  1. Select the device for which you want to manage alert(s).
  2. Move your mouse pointer to the top control Alerts menu and select Device alerts.
  3. A pop-up window listing alerts for the selected device will appear.

Delete device alert[edit source]


  1. Select the device for which you want to manage alert(s).
  2. Move your mouse pointer to the top control Alerts menu and select Device alerts.
  3. A pop-up window will be shown a list of alerts existing in the selected device.
  4. You can delete alerts by clicking theRMS-trash-icon-2.pngsymbol located next to each alert.
  5. In the next window you will get a Remove device alert confirmation message. Click Yes to proceed.
  6. After the deletion is complete in the Status column you will get a message: Alert removed successfully.

Rms manual delete device alerts v1.png