Difference between revisions of "Template:Rms manual management configuration upload"

From Teltonika Networks Wiki
Line 7: Line 7:
 
* Scroll your mouse pointer to the Configuration submenu ('''Management → Configuration''') and click "Upload":
 
* Scroll your mouse pointer to the Configuration submenu ('''Management → Configuration''') and click "Upload":
  
[[File:How to upload config to device in rms part 5 v1.png]]
+
[[File:How to upload config to device in rms part 5 v2.png]]
 
----
 
----
 
* Select a configuration file either from the ones you've uploaded to RMS before or from your computer:
 
* Select a configuration file either from the ones you've uploaded to RMS before or from your computer:

Revision as of 07:58, 15 May 2018

The Upload function provides you with the possibility to upload configuration files to devices registered on your RMS profile.


  • Select the device(s) that will receive the uploaded configuration file:

How to upload config to device in rms part 1 v1.png


  • Scroll your mouse pointer to the Configuration submenu (Management → Configuration) and click "Upload":

How to upload config to device in rms part 5 v2.png


  • Select a configuration file either from the ones you've uploaded to RMS before or from your computer:

How to upload config to device in rms part 2 v1.png

NOTE: you can only load a configuration file that was downloaded from the same type of router with the same firmware version.


  • You will be prompted to confirm the procedure. If you are ready to proceed, click "Yes":

How to upload config to device in rms part 3 v1.png


  • The next pop-up will show the status of the process. When you see a green check mark and the text "This router wont' be reachable for few minutes" under the "Event" field, your configuration will have been uploaded and at that point you can close the pop-up box:

How to upload config to device in rms part 4 v1.png

Your configuration will be applied in a few minutes.