Difference between revisions of "Template:Rms manual management configuration upload"

From Teltonika Networks Wiki
Line 7: Line 7:
 
The '''Upload backup''' option provides you with the ability to upload configuration files to devices registered on your RMS profile.
 
The '''Upload backup''' option provides you with the ability to upload configuration files to devices registered on your RMS profile.
  
----
+
<br>
* Select the device(s) that will receive the uploaded configuration file:
+
[[File:RMS-upload backup.gif]]
 
 
[[File:How to upload config to device in rms part 1 v1.png|1150px]]
 
----
 
* Scroll your mouse pointer to the Configuration submenu ('''Management → Configuration''') and click "Upload":
 
 
 
[[File:How to upload config to device in rms part 5 v2.png]]
 
----
 
* Select a configuration file either from the ones you've uploaded to RMS before or from your computer:
 
 
 
[[File:How to upload config to device in rms part 2 v1.png]]
 
 
 
'''NOTE''': you can only load a configuration file that was downloaded from the same type of router with the same firmware version.
 
----
 
* You will be prompted to confirm the procedure. If you are ready to proceed, click "Yes":
 
  
[[File:How to upload config to device in rms part 3 v1.png]]
+
<br>
 +
===Instructions===
 
----
 
----
* The next pop-up will show the status of the process. When you see a green check mark and the text "This router wont' be reachable for few minutes" under the "Event" field, your configuration will have been uploaded and at that point you can close the pop-up box: 
+
Read step by step instructions to learn how to upload configuration (backup) for your device(s).
  
[[File:How to upload config to device in rms part 4 v1.png]]
+
# Select the device(s) that will upload configuration (backup) file to.
 +
# Move your mouse pointer to the '''Configuration''' menu and click "Upload backup".
 +
# After a pop-up window will appear. Select the configuration file ([[RMS_-_Configuration#Upload_config_file|you've uploaded to RMS previously]]) from a drop-down menu. And click '''Select''' button.
 +
# In the next window will display configuration upload progress.
 +
# After the configuration (backup) is complete you will get '''<span style="color:#6CAF8F">✔</span> Done''' in the Status column.  
  
Your configuration will be applied in a few minutes.
+
'''<span style="color:#0455a4"><big>Important!</big></span>'''
 +
* Allow some time for your device(s) to load new configuration. They wont be reachable for up to 1 minute.
 +
* When the <span style="color:#BC5265">⬤</span> red circle ('''Offline''') will change to <span style="color:#6CAF8F">⬤</span> green circle ('''Online''') configuration got uploaded and device(s) are fully operational.

Revision as of 10:30, 5 July 2019

Using Upload backup option you can upload configuration (backup) file for your selected device(s). To upload files go to the RMS web page, Left sidebar panel, (Management → Overview) and click on Overview submenu.

Move your mouse pointer to the Top control Actions menu and select Upload backup (Actions → Upload backup).

RMS-device-menu-left-sidebar-panel.jpg RMS-top-menu-configuration-upload-backup.jpg

The Upload backup option provides you with the ability to upload configuration files to devices registered on your RMS profile.


RMS-upload backup.gif


Instructions


Read step by step instructions to learn how to upload configuration (backup) for your device(s).

  1. Select the device(s) that will upload configuration (backup) file to.
  2. Move your mouse pointer to the Configuration menu and click "Upload backup".
  3. After a pop-up window will appear. Select the configuration file (you've uploaded to RMS previously) from a drop-down menu. And click Select button.
  4. In the next window will display configuration upload progress.
  5. After the configuration (backup) is complete you will get Done in the Status column.

Important!

  • Allow some time for your device(s) to load new configuration. They wont be reachable for up to 1 minute.
  • When the red circle (Offline) will change to green circle (Online) configuration got uploaded and device(s) are fully operational.