Template:Rms manual management device submenu add device

From Teltonika Networks Wiki
Revision as of 09:09, 4 February 2019 by Dziugas (talk | contribs)

  • To add a new device(s) to RMS, hover your mouse pointer over the Device submenu (Management → Device) and click Add device:
    Networking rms manual management device add device part 1 v2.png

  • In the pop-up box select your company, choose the device's type (RUT or TRB), enter the device's serial number*, LAN MAC Address* (IMEI* for TRB) and a custom name. Click the plus (Rms plus symbol.png) symbol to add more than one device. Click Add:
    Networking rms manual management device add device part 2 v1.png
    * You can find the serial number, LAN MAC address and IMEI on the device's package or in the WebUI, in the System → Administration → RMS page

  • Don't forget to set the Connection type field the Enabled on the device(s) that you are trying to add. You can do that from the System → Administration → RMS:
    Networking rms manual management device add device part 4 v3.png

  • Wait for about a minute for the system to finish adding the device(s). You will know the process is done when the word "Done" appears under the Status field:
    Networking rms manual management device add device part 3 v2.png

  • You can close the box earlier if you wish. You should be able to see the newly added device(s) in the device table. When status circle turns green, the system will have finished adding the device to RMS:
    Networking rms manual management device add device part 5 v1.png