Template:Rms manual management device submenu add device list

From Teltonika Networks Wiki
Revision as of 14:46, 4 February 2019 by Dziugas (talk | contribs)

  • First, you must compile a list of devices. The list must be comprised of devices' serial numbers and LAN MAC addresses (IMEIs for TRB) and it must be stored in a CSV file. You can create CSV files with programs like Microsoft Excel, OpenOffice Calc or a simple text editor like Notepad, which we'll be using for this example.
    Create a new text file and list your devices. An entry for a single device should be comprised of the device's serial number and LAN MAC address (or IMEI) separated by a comma (,) symbol. Different entries for different devices should be separated by line breaks:
    Networking rms manual management device add device list part 1 v1.png

  • When you're done, do not save the file as is. Instead click the "Save As" option. Then next to "Save as type" choose "All Files" and add the .csv extension next to the file name (if you're using Linux, you can just add the same extension to the file name after saving the file the regular way):
    Networking rms manual management device add device list part 2 v1.png

  • Once you have the list file in order, navigate your mouse pointer to the Device submenu (Management → Device) and click Add device list:
    Networking rms manual management device add device list part 3 v1.png

  • In the pop-up box select the desired profile, upload the list file, enter the required data and click Upload:
    Networking rms manual management device add device list part 4 v1.png

  • A pop-up indicating the number of new devices that have been added should appear at the top of the screen:
    Networking rms manual management device add device list part 5 v3.png

  • Don't forget to set the Connection type field the Enabled on the device(s) that you are trying to add. You can do that from the System → Administration → RMS:
    Networking rms manual management device add device part 4 v3.png

  • The devices should appear in the device table immediately, but at first they will be shown as offline (red). When the circle under the Status column turns green, then the devices will have finished connecting to RMS:
    Networking rms manual management device add device list part 6 v2.png
    NOTE: the time that it takes for all devices to be registered on the system may vary depending on the number of devices.