Template:Rms manual management monitoring submenu configuration

From Teltonika Networks Wiki

To change monitoring options for your device go to the RMS web page, Left sidebar panel (Management → Overview) and click on Overview submenu.

Move your mouse pointer to the Top control Devices menu and select Set update period (Devices → Set update period).


RMS Monitoring Set Update Period.gif

Step by step instructions

  • First, choose a device(s) for which the configuration will apply.
  • Move your mouse pointer to the Monitoring submenu (found in Management → Monitoring) and click "Configuration":
  • After a new pop-up window should appear. Place check marks next to relevant parameters to set up custom monitoring intervals. On the right you can set up the monitoring update frequency; on the left, you can set the time units for that frequency. As you change these settings, an estimated monthly data usage value will be calculated below in real time:
  • Dynamic Monitoring - every varying router parameter (e.g., uptime, mobile uptime, modem temperature, etc.).
  • Static Monitoring - every static router parameter (e.g., product code, batch number, hardware revision, etc.).
  • Hotspot Monitoring - Hotspot related parameters (Hotspot SSID, Hotspot IP address, Users online).
  • GPS Monitoring - GPS related parameters (e.g., longitude, latitude, altitude, GPS fix status, time, etc.).
  • Input/Output Monitoring - Input/Output related parameters (states of inputs and outputs).

Estimated monthly data usage


Estimated data usage calculates an estimate of monthly data usage based on the update period values specified above.


RMS Monitoring Data.gif