Difference between revisions of "Template:Security guidelines"

From Teltonika Networks Wiki
Line 1: Line 1:
 
==Summary==
 
==Summary==
Software security has proven inadequate to thwart known threats. A networked device lacking adequate hardware security can be easily hacked by an end-user. Teltonika's engineers have spent many hours making devices as safe as possible by implementing many security features. In this article you can find details about all Teltonika's supported security features also what device has which security implementations and a guide how to use them properly.
+
In this article you can find details about all Teltonika's supported security features also what device has which security implementations and a guide how to use them properly.
  
 
==Security features==
 
==Security features==

Revision as of 14:50, 31 January 2020

Summary

In this article you can find details about all Teltonika's supported security features also what device has which security implementations and a guide how to use them properly.

Security features

In the table below you can find all the security features supported by Teltonika's devices:

Security measurement type Security measurement name By default Details
DDOS Prevention SYN Flood Protection On A SYN flood is a form of denial-of-service attack in which an attacker sends a succession of SYN requests to a target's system in an attempt to consume enough server resources to make the system unresponsive to legitimate traffic.
Remote ICMP Requests On An Internet Control Message Protocol (ICMP) flood attack, also known as a Ping flood attack, is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with ICMP echo-requests (pings).
SSH Attack Prevention Off A Secure Shell (SSH) flood attack, is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with SSH requests.
HTTP Attack Prevention Off A Hypertext Transfer Protocol (HTTP) flood attack is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with HTTP requests.
HTTPS Attack Prevention Off Hypertext Transfer Protocol Secure (HTTPS) flood attack is same as HTTP flood attack but using HTTPS protocol instead of simple HTTP
Port Scan Prevention Port Scan Off A port scan is a process that sends client requests to a range of server port addresses on a host, with the goal of finding an active port.
SYN-FIN attack Off An attacker may send TCP/IP packets with the SYN and FIN TCP/IP flags set to a target system, ranging across all ports, to find open TCP/IP ports for further attacks. The target system will drop packets which are destined to open ports and send back RST/ACK packets for closed ports. The attacker may gather information from the system responses.
SYN-RST attack Off SYN-RST attack, also known as TCP reset attack, is an abrupt closure of the session which causes the resources allocated to the connection to be immediately released and all other information about the connection is erased. TCP reset is identified by the RESET flag in the TCP header.
X-Mas attack Off Christmas Tree (X-Mas) Attack is designed to send a very specifically crafted TCP packet to a device on the network. This crafting of the packet is one that turns on a bunch of flags. There is some space set up in the TCP header, called flags. And these flags all are turned on or turned off, depending on what the packet is doing.
FIN scan Off FIN packets can bypass firewalls without modification. Closed ports reply to a FIN packet with the appropriate RST packet, whereas open ports ignore the packet on hand. This is typical behavior due to the nature of TCP.
NULLflags attack Off A Null Scan is a series of TCP packets that contain a sequence number of 0 and no set flags. In a production environment, there will never be a TCP packet that doesn’t contain a flag. Because the Null Scan does not contain any set flags, it can sometimes penetrate firewalls and routers that filter incoming packets with particular flags.
Access Control Remote SSH access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTP access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTPS access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote CLI access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Local SSH access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTP access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTPS access Off By default turned off - where is no scenario where HTTPS usage would be needed "out side the box".
Local CLI access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Block Unwanted Access SSH Access Secure On By default, device allows a maximum of 5 login attempts (user defined). If all attempts are used, device will block SSH access from that source.
WebUI Access Secure On By default, device allows a maximum of 5 login attempts (user defined). If all attempts are used, device will block WebUI access from that source.
Configuration via SMS SMS Utilities By router admin password Default authorization method for configuration via SMS command is by router admin password. It's very important to have a strong password for admin account.
Default admin password First login On Default password for Teltonika's devices is admin01 (weak password) but on first login to WebUI - RutOS forcefully requires user to change it. It is recommended to use a strong password
Certificates Root CA Pre-uplouded Root CA certificate are only needed if you want to use HTTPS for your services. There is a default file already preloaded in this device which will be overwritten by any uploaded file.
Universal Plug and Play UPnP Not installed / Off UPnP doesn't require any sort of authentication from the user. Any application running on your computer in LAN can ask the router to forward a port over UPnP, which is why the malware can abuse UPnP. Recommendation - If you don’t use it when leave it not installed or turned off.
Universal Asynchronous Receiver – Transmitter UART By router admin password Many manufacturers are implementing UART interfaces on their devices. If this interface is not password protected, security of the device may be compromised. If malicious 3rd party gains physical access to the device it will have full control of the router via UART interface, this is a reason why our devices have password protected UART interfaces.

Security recommendations

Security features will not help if you won't use them properly, below you can find a table with recommendations:

Topic Recommendation Comment
SSH access Use a different port than 22 22 is the default port used by SSH protocol. You should not use the default port as it is easy to guess and more vulnerable to brute-force attacks.
Use strong passwords and passphrases Most of the servers security are compromised because of the weak passwords. They use easy to guess passwords like the brand name of the device or some universal password like 123456 or Admin123. Weak password is more likely to be cracked by brute-force attacks. You should be using a very strong password or passphrase to log in your SSH server.
Firewall Block traffic by default Start blocking all traffic by default and only allow specific traffic to identified services. This approach provides quality control over the traffic and decreases the possibility of a breach. This behavior can be achieved by configuring the last rule in an access control list to deny all traffic. 
Reviewing firewall rules Networks are constantly changing by gaining new users and new devices. New services and new applications are being accessed which means new firewall rules will need to be added. The old firewall rules will need to be reviewed and deleted if necessary.
VPN Always use VPN if you have the possibility Encrypted traffic is more secure than unencrypted traffic. Unencrypted traffic can be easily sniffed or even altered by malicious 3rd party.
WiFi AP Use WPA2-PSK (AES) encryption This is the most secure option. It uses WPA2, the latest Wi-Fi encryption standard, and the latest AES encryption protocol
Use WiFi AP strong key (password/passphrase) "If malicious 3rd party is able to capture encrypted 4-way handshake, with strong password, decryption time can increase up to n years.
Separate clients Separate clients also known as wireless client isolation is a security feature that prevents wireless clients from communicating with one another. This feature adds additional level of security to limit attacks and threats between devices connected to the wireless networks.
WiFi Hotspot Setting up a guest network for visitors By setting up a guest Wi-Fi. A guest Wi-Fi network is essentially a separate access point on your router with separate IP pool. For example with guest network malware that somehow ended up on a guest’s smartphone will not be able to get into your main business LAN
Hotspot configuration Setup data bandwidth limit. In that case malicious 3rd party will be unable to drain all your bandwidth. Use session time limit. In that case malicious 3rd party will be unable to drain your mobile data limit
WiFi SSID Don't broadcast your router details Service set identifier (SSID) should be changed. Default name will broadcast your device model.
DNS server Don't use your Internet Service Providers (ISP) default Domain Name System (DNS) There may come a time when the DNS servers used by your ISP come under attack, by a distributed denial-of-service (DDoS) attack, for example, or someone changing the DNS to effect a cloned banking fraud.
Password Always use only strong passwords Strong password requirements:
  • Has 12 characters, minimum;
  • Includes numbers, symbols, capital letters, and Lower-Case Letters;
  • Isn’t a dictionary word or combination of dictionary words;
  • Doesn’t rely on obvious substitutions.
You can check your current password strength here: https://howsecureismypassword.net/"
Firmware update Keep firmware up to date With new firmware comes a lot of improvements:
  • Security fixes;
  • Performance enhancements;
  • Visual updates;
So where is no reason why you shouldn't update firmware.
Secure firmware update Always update firmware from official website Always update firmware downloaded from our official page or use firmware over the air (FOTA).
RMS Use RMS for remote access to the router Disable remote access to your public IP and use RMS for remote management instead. You can find more details about RMS here: https://teltonika-networks.com/product/rms/
Unused features Turn off router features you don’t use that could pose a security risk This would include remote access, Universal Plug and Play (UPnP), etc...
Common sense Always use common sense while configuring any network device -

RUT2xx security features

In the table below you can find all the security features supported by Teltonika's RUT2xx devices:

Security measurement type Security measurement name By default Details
DDOS Prevention SYN Flood Protection On A SYN flood is a form of denial-of-service attack in which an attacker sends a succession of SYN requests to a target's system in an attempt to consume enough server resources to make the system unresponsive to legitimate traffic.
Remote ICMP Requests On An Internet Control Message Protocol (ICMP) flood attack, also known as a Ping flood attack, is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with ICMP echo-requests (pings).
SSH Attack Prevention Off A Secure Shell (SSH) flood attack, is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with SSH requests.
HTTP Attack Prevention Off A Hypertext Transfer Protocol (HTTP) flood attack is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with HTTP requests.
HTTPS Attack Prevention Off Hypertext Transfer Protocol Secure (HTTPS) flood attack is same as HTTP flood attack but using HTTPS protocol instead of simple HTTP
Port Scan Prevention Port Scan Off A port scan is a process that sends client requests to a range of server port addresses on a host, with the goal of finding an active port.
SYN-FIN attack Off An attacker may send TCP/IP packets with the SYN and FIN TCP/IP flags set to a target system, ranging across all ports, to find open TCP/IP ports for further attacks. The target system will drop packets which are destined to open ports and send back RST/ACK packets for closed ports. The attacker may gather information from the system responses.
SYN-RST attack Off SYN-RST attack, also known as TCP reset attack, is an abrupt closure of the session which causes the resources allocated to the connection to be immediately released and all other information about the connection is erased. TCP reset is identified by the RESET flag in the TCP header.
X-Mas attack Off Christmas Tree (X-Mas) Attack is designed to send a very specifically crafted TCP packet to a device on the network. This crafting of the packet is one that turns on a bunch of flags. There is some space set up in the TCP header, called flags. And these flags all are turned on or turned off, depending on what the packet is doing.
FIN scan Off FIN packets can bypass firewalls without modification. Closed ports reply to a FIN packet with the appropriate RST packet, whereas open ports ignore the packet on hand. This is typical behavior due to the nature of TCP.
NULLflags attack Off A Null Scan is a series of TCP packets that contain a sequence number of 0 and no set flags. In a production environment, there will never be a TCP packet that doesn’t contain a flag. Because the Null Scan does not contain any set flags, it can sometimes penetrate firewalls and routers that filter incoming packets with particular flags.
Access Control Remote SSH access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTP access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTPS access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote CLI access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Local SSH access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTP access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTPS access Off By default turned off - where is no scenario where HTTPS usage would be needed "out side the box".
Local CLI access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Block Unwanted Access SSH Access Secure On By default, device allows a maximum of 5 login attempts (user defined). If all attempts are used, device will block SSH access from that source.
WebUI Access Secure On By default, device allows a maximum of 5 login attempts (user defined). If all attempts are used, device will block WebUI access from that source.
Configuration via SMS SMS Utilities By router admin password Default authorization method for configuration via SMS command is by router admin password. It's very important to have a strong password for admin account.
Default admin password First login On Default password for Teltonika's devices is admin01 (weak password) but on first login to WebUI - RutOS forcefully requires user to change it. It is recommended to use a strong password
Certificates Root CA Pre-uplouded Root CA certificate are only needed if you want to use HTTPS for your services. There is a default file already preloaded in this device which will be overwritten by any uploaded file.
Universal Plug and Play UPnP Not installed / Off UPnP doesn't require any sort of authentication from the user. Any application running on your computer in LAN can ask the router to forward a port over UPnP, which is why the malware can abuse UPnP. Recommendation - If you don’t use it when leave it not installed or turned off.
Universal Asynchronous Receiver – Transmitter UART By router admin password Many manufacturers are implementing UART interfaces on their devices. If this interface is not password protected, security of the device may be compromised. If malicious 3rd party gains physical access to the device it will have full control of the router via UART interface, this is a reason why our devices have password protected UART interfaces.

RUT850 security features

In the table below you can find all the security features supported by Teltonika's RUT850 device:

Security measurement type Security measurement name By default Details
DDOS Prevention SYN Flood Protection On A SYN flood is a form of denial-of-service attack in which an attacker sends a succession of SYN requests to a target's system in an attempt to consume enough server resources to make the system unresponsive to legitimate traffic.
Remote ICMP Requests On An Internet Control Message Protocol (ICMP) flood attack, also known as a Ping flood attack, is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with ICMP echo-requests (pings).
SSH Attack Prevention Off A Secure Shell (SSH) flood attack, is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with SSH requests.
HTTP Attack Prevention Off A Hypertext Transfer Protocol (HTTP) flood attack is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with HTTP requests.
HTTPS Attack Prevention Off Hypertext Transfer Protocol Secure (HTTPS) flood attack is same as HTTP flood attack but using HTTPS protocol instead of simple HTTP
Port Scan Prevention Port Scan Off A port scan is a process that sends client requests to a range of server port addresses on a host, with the goal of finding an active port.
SYN-FIN attack Off An attacker may send TCP/IP packets with the SYN and FIN TCP/IP flags set to a target system, ranging across all ports, to find open TCP/IP ports for further attacks. The target system will drop packets which are destined to open ports and send back RST/ACK packets for closed ports. The attacker may gather information from the system responses.
SYN-RST attack Off SYN-RST attack, also known as TCP reset attack, is an abrupt closure of the session which causes the resources allocated to the connection to be immediately released and all other information about the connection is erased. TCP reset is identified by the RESET flag in the TCP header.
X-Mas attack Off Christmas Tree (X-Mas) Attack is designed to send a very specifically crafted TCP packet to a device on the network. This crafting of the packet is one that turns on a bunch of flags. There is some space set up in the TCP header, called flags. And these flags all are turned on or turned off, depending on what the packet is doing.
FIN scan Off FIN packets can bypass firewalls without modification. Closed ports reply to a FIN packet with the appropriate RST packet, whereas open ports ignore the packet on hand. This is typical behavior due to the nature of TCP.
NULLflags attack Off A Null Scan is a series of TCP packets that contain a sequence number of 0 and no set flags. In a production environment, there will never be a TCP packet that doesn’t contain a flag. Because the Null Scan does not contain any set flags, it can sometimes penetrate firewalls and routers that filter incoming packets with particular flags.
Access Control Remote SSH access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTP access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTPS access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote CLI access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Local SSH access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTP access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTPS access Off By default turned off - where is no scenario where HTTPS usage would be needed "out side the box".
Local CLI access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Block Unwanted Access SSH Access Secure On By default, device allows a maximum of 5 login attempts (user defined). If all attempts are used, device will block SSH access from that source.
WebUI Access Secure On By default, device allows a maximum of 5 login attempts (user defined). If all attempts are used, device will block WebUI access from that source.
Configuration via SMS SMS Utilities By router admin password Default authorization method for configuration via SMS command is by router admin password. It's very important to have a strong password for admin account.
Default admin password First login On Default password for Teltonika's devices is admin01 (weak password) but on first login to WebUI - RutOS forcefully requires user to change it. It is recommended to use a strong password
Certificates Root CA Pre-uplouded Root CA certificate are only needed if you want to use HTTPS for your services. There is a default file already preloaded in this device which will be overwritten by any uploaded file.
Universal Asynchronous Receiver – Transmitter UART By router admin password Many manufacturers are implementing UART interfaces on their devices. If this interface is not password protected, security of the device may be compromised. If malicious 3rd party gains physical access to the device it will have full control of the router via UART interface, this is a reason why our devices have password protected UART interfaces.

RUT9xx security features

In the table below you can find all the security features supported by Teltonika's RUT9xx devices:

Security measurement type Security measurement name By default Details
DDOS Prevention SYN Flood Protection On A SYN flood is a form of denial-of-service attack in which an attacker sends a succession of SYN requests to a target's system in an attempt to consume enough server resources to make the system unresponsive to legitimate traffic.
Remote ICMP Requests On An Internet Control Message Protocol (ICMP) flood attack, also known as a Ping flood attack, is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with ICMP echo-requests (pings).
SSH Attack Prevention Off A Secure Shell (SSH) flood attack, is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with SSH requests.
HTTP Attack Prevention Off A Hypertext Transfer Protocol (HTTP) flood attack is a common denial-of-service attack in which an attacker attempts to overwhelm a targeted device with HTTP requests.
HTTPS Attack Prevention Off Hypertext Transfer Protocol Secure (HTTPS) flood attack is same as HTTP flood attack but using HTTPS protocol instead of simple HTTP
Port Scan Prevention Port Scan Off A port scan is a process that sends client requests to a range of server port addresses on a host, with the goal of finding an active port.
SYN-FIN attack Off An attacker may send TCP/IP packets with the SYN and FIN TCP/IP flags set to a target system, ranging across all ports, to find open TCP/IP ports for further attacks. The target system will drop packets which are destined to open ports and send back RST/ACK packets for closed ports. The attacker may gather information from the system responses.
SYN-RST attack Off SYN-RST attack, also known as TCP reset attack, is an abrupt closure of the session which causes the resources allocated to the connection to be immediately released and all other information about the connection is erased. TCP reset is identified by the RESET flag in the TCP header.
X-Mas attack Off Christmas Tree (X-Mas) Attack is designed to send a very specifically crafted TCP packet to a device on the network. This crafting of the packet is one that turns on a bunch of flags. There is some space set up in the TCP header, called flags. And these flags all are turned on or turned off, depending on what the packet is doing.
FIN scan Off FIN packets can bypass firewalls without modification. Closed ports reply to a FIN packet with the appropriate RST packet, whereas open ports ignore the packet on hand. This is typical behavior due to the nature of TCP.
NULLflags attack Off A Null Scan is a series of TCP packets that contain a sequence number of 0 and no set flags. In a production environment, there will never be a TCP packet that doesn’t contain a flag. Because the Null Scan does not contain any set flags, it can sometimes penetrate firewalls and routers that filter incoming packets with particular flags.
Access Control Remote SSH access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTP access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTPS access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote CLI access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Local SSH access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTP access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTPS access Off By default turned off - where is no scenario where HTTPS usage would be needed "out side the box".
Local CLI access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Block Unwanted Access SSH Access Secure On By default, device allows a maximum of 5 login attempts (user defined). If all attempts are used, device will block SSH access from that source.
WebUI Access Secure On By default, device allows a maximum of 5 login attempts (user defined). If all attempts are used, device will block WebUI access from that source.
Configuration via SMS SMS Utilities By router admin password Default authorization method for configuration via SMS command is by router admin password. It's very important to have a strong password for admin account.
Default admin password First login On Default password for Teltonika's devices is admin01 (weak password) but on first login to WebUI - RutOS forcefully requires user to change it. It is recommended to use a strong password
Certificates Root CA Pre-uplouded Root CA certificate are only needed if you want to use HTTPS for your services. There is a default file already preloaded in this device which will be overwritten by any uploaded file.
Universal Plug and Play UPnP Not installed / Off UPnP doesn't require any sort of authentication from the user. Any application running on your computer in LAN can ask the router to forward a port over UPnP, which is why the malware can abuse UPnP. Recommendation - If you don’t use it when leave it not installed or turned off.
Universal Asynchronous Receiver – Transmitter UART By router admin password Many manufacturers are implementing UART interfaces on their devices. If this interface is not password protected, security of the device may be compromised. If malicious 3rd party gains physical access to the device it will have full control of the router via UART interface, this is a reason why our devices have password protected UART interfaces.

RUTXxx security features

In the table below you can find all the security features supported by Teltonika's RUTXxx devices:

Security measurement type Security measurement name By default Details
DDOS Prevention SYN Flood Protection On A SYN flood is a form of denial-of-service attack in which an attacker sends a succession of SYN requests to a target's system in an attempt to consume enough server resources to make the system unresponsive to legitimate traffic.
Access Control Remote SSH access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTP access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTPS access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote CLI access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Local SSH access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTP access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTPS access Off By default turned off - where is no scenario where HTTPS usage would be needed "out side the box".
Local CLI access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Block Unwanted Access SSH Access Secure On By default, device allows a maximum of 5 login attempts (user defined). If all attempts are used, device will block SSH access from that source.
Configuration via SMS SMS Utilities (Only in RUTX09 and RUTX11) By router admin password Default authorization method for configuration via SMS command is by router admin password. It's very important to have a strong password for admin account.
Default admin password First login On Default password for Teltonika's devices is admin01 (weak password) but on first login to WebUI - RutOS forcefully requires user to change it. It is recommended to use a strong password
Certificates Root CA Pre-uplouded Root CA certificate are only needed if you want to use HTTPS for your services. There is a default file already preloaded in this device which will be overwritten by any uploaded file.
Universal Plug and Play UPnP Not installed / Off UPnP doesn't require any sort of authentication from the user. Any application running on your computer in LAN can ask the router to forward a port over UPnP, which is why the malware can abuse UPnP. Recommendation - If you don’t use it when leave it not installed or turned off.
Universal Asynchronous Receiver – Transmitter UART By router admin password Many manufacturers are implementing UART interfaces on their devices. If this interface is not password protected, security of the device may be compromised. If malicious 3rd party gains physical access to the device it will have full control of the router via UART interface, this is a reason why our devices have password protected UART interfaces.

TRB14x security features

In the table below you can find all the security features supported by Teltonika's TRB14x devices:

Security measurement type Security measurement name By default Details
DDOS Prevention SYN Flood Protection On A SYN flood is a form of denial-of-service attack in which an attacker sends a succession of SYN requests to a target's system in an attempt to consume enough server resources to make the system unresponsive to legitimate traffic.
Access Control Remote SSH access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTP access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote HTTPS access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Remote CLI access Off All Remote access is disabled by default. If user is using remote access feature it may be a security threat. If user decides to use this feature - it is recommended to use a strong password.
Local SSH access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTP access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Local HTTPS access Off By default turned off - where is no scenario where HTTPS usage would be needed "out side the box".
Local CLI access On Enabled by default for user convenience, allows possibility of configuring the device when user is in the same LAN.
Configuration via SMS SMS Utilities By router admin password Default authorization method for configuration via SMS command is by router admin password. It's very important to have a strong password for admin account.
Default admin password First login On Default password for Teltonika's devices is admin01 (weak password) but on first login to WebUI - RutOS forcefully requires user to change it. It is recommended to use a strong password
Certificates Root CA Pre-uplouded Root CA certificate are only needed if you want to use HTTPS for your services. There is a default file already preloaded in this device which will be overwritten by any uploaded file.
Universal Asynchronous Receiver – Transmitter UART By router admin password Many manufacturers are implementing UART interfaces on their devices. If this interface is not password protected, security of the device may be compromised. If malicious 3rd party gains physical access to the device it will have full control of the router via UART interface, this is a reason why our devices have password protected UART interfaces.