Difference between revisions of "Template:Webui services rs232 rs232 configuration modem"
From Teltonika Networks Wiki
(Created page with "In '''Modem''' serial type, the device imitates a dial-up modem. Connections to TCP/IP networks can be established using AT commands. The connection can be initiated by the de...") |
|||
| Line 1: | Line 1: | ||
| − | In | + | In <b>Modem</b> serial type, the device imitates a dial-up modem. Connections to TCP/IP networks can be established using AT commands. The connection can be initiated by a device connected via the RS232 serial interface with an ATD command: <b>ATD <HOST>:<PORT></b>. If Direct connect settings are specified, the connection to the server is always active. Data mode can be entered by issuing the ATD command. Incoming connections are indicated by sending a RING to the serial interface. |
The figure below is an example of available configuration fields for the Modem serial type and the table below provides information on these fields: | The figure below is an example of available configuration fields for the Modem serial type and the table below provides information on these fields: | ||
Latest revision as of 13:43, 9 January 2019
In Modem serial type, the device imitates a dial-up modem. Connections to TCP/IP networks can be established using AT commands. The connection can be initiated by a device connected via the RS232 serial interface with an ATD command: ATD <HOST>:<PORT>. If Direct connect settings are specified, the connection to the server is always active. Data mode can be entered by issuing the ATD command. Incoming connections are indicated by sending a RING to the serial interface.
The figure below is an example of available configuration fields for the Modem serial type and the table below provides information on these fields:
