Difference between revisions of "What IP addresses and ports are used by RMS?"
m (Protected "What IP addresses and ports are used by RMS?" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
Revision as of 14:47, 25 August 2021Main Page > IoT Platforms > RMS > RMS FAQ > What IP addresses and ports are used by RMS?
This article lists IP addresses and TCP/UDP ports used by the Teltonika Networks RMS. For all or specific RMS functionalities to work, the device must access the IPs and ports provided below.
Reaching RMS platform
To reach the RMS platform from a device in a private network would require access to the IP address 22.214.171.124 and the ports provided in the table below.
RMS Management uses the following IP address: 126.96.36.199 and the ports provided in the table below.
RMS Connect uses the following IP address: 188.8.131.52 and the ports provided in the table below.
Remote mobile devices
RMS Connect - Remote mobile devices uses the following IP address: 184.108.40.206.
RMS VPN uses the following IP addresses: 220.127.116.11 and 18.104.22.168.
|TCP||Random port in the [30000-39999] range|
* Although these are currently used ports, it is recommended to unblock all ports on specified IP addresses.
In most cases, access to these IP addresses shall not be an issue as usually none of the outgoing traffic is blocked.
However, where ISP blocks all non-standard ports or the SIM card is in a Private APN network/setup, you will have to inquire your ISP to allow the mentioned IP and Ports to be made available.