View source for WiFi roaming setup for home/small office

===Access Points===
----
<ol>
  <li>Connect your AP to the gateway router using LAN to LAN connection.</li>
  <li>Login to the router's WebUI, navigate to the '''Network → Interfaces → Edit LAN''' page. Configure as follows:</li>
  <ol>
    <li>Enter IP address on the same subnet as main gateway. We will use 192.168.1.2 for Router 1 and 192.168.1.3 for Router 2 in this example.</li>
    <li>Enter <b>IPv4 gateway</b>. We will use our gateway router's IP - 192.168.1.1.</li>
    <li>Disable <b>DHCP server</b>.</li>
  </ol>
</ol>

[[File:Networking rutos configuration examples wifi roaming 2 v1.png|border|class=tlt-border]]

<ol start="3">
  <li>Alternatively, instead of manually configuring each interface, you can select <b>DHCP</b> Protocol and let it decide the address.</li>
</ol>

[[File:Networking rutos configuration examples wifi roaming 3 v1.png|border|class=tlt-border]]

<b>Note: </b>The configuration below applies to all APs and must match:

<ol start="4">
  <li>Navigate to the '''Network → Wireless → Edit AP''' page. Configure an existing AP follows or create a new one:</li>
  <ol>
    <li>Change AP SSID. We will use "WifiRoam" for this example.</li>
    <li>Select Network - <b>lan</b></li>
  </ol>
</ol>

[[File:Networking rutos configuration examples wifi roaming 4 v1.png|border|class=tlt-border]]

<ol start="5">
  <li>Navigate to the '''Wireless Security''' section. Configure as follows:</li>
  <ol>
    <li>Choose encryption. We will leave default WPA2-PSK.</li>
    <li>Enter the password.</li>
    <li>Enable <b>802.11r Fast Transition</b></li>
    <li>Enter the <b>Mobility Domain</b>. Leave empty or choose a 4 character hexadecimal ID, i.e. <i>abcd</i></li>
  </ol>
</ol>

[[File:Networking rutos configuration examples wifi roaming 5 v1.png|border|class=tlt-border]]