Changes

This page will show you an example on how to configure a basic tunnel between WireGuard interface and its peers.

This page will show you an example on how to configure a basic tunnel between WireGuard interface and its peers.

<u><b>Note:</b> WireGuard is additional software that can be installed from the <b>Services → Package Manager</b> page.</u>

<u><b>Note:</b> WireGuard is additional software that can be installed from the <b>Services → Package Manager</b> page</u> (in RUT9/RUT2 this page is located in <b>System → Package Manager</b>).

==Prerequisites==

==Prerequisites==

If you dont see <b>latest handshake</b> line, then ping the <b>Public IP address</b> you specified in  

If you dont see <b>latest handshake</b> line, then ping the <b>Public IP address</b> you specified in  

<b>Endpoint Host</b> field.

<b>Endpoint Host</b> field, this will initiate handshake.

     ping XX.XX.XX.XX

     ping XX.XX.XX.XX