View source for Ironwifi.com Hotspot Configuration on RutOS firmware

==Summary==

This chapter is a guide on configuring ironwifi.com provider '''hotspot''' instance on RUTX routers. This setup is also applicable to RUT series devices.
==Step 1: cobot.me configuration ==
===Login===
----
First, go to '''console.ironwifi.com/login''' and log into your account. If you don't have a registered account then you will need to create one - click '''Open Account.'''
[[File:Ironwifilogin2.png|border|center]]
====Sign Up====

After clicking '''Open Account''' you will be redirected to register page. Enter you account information and click '''Submit'''. To complete registration go to your email inbox.

[[File:Ironregister56.png|border|center]]




===Set Up new radius server===
----
In the opened window click '''Networks.'''
[[File:Ironuser5.png|border|center|1220x1220px]]


Then - '''New Network''' and you will be prompted to create a new network.
[[File:Ironguest6.png|border|center|1306x1306px]]
Enter your desired network name can click '''Create'''.
[[File:Ironradius1.png|border|center]]
===Network details===

Click on your '''created network.'''
[[File:Irondata1.png|border|center|1142x1142px]]
You will be taken to a window where all detailed Radius server information will be displayed.
[[File:Ironnetwork details.png|border|center|1152x1152px]]
===Add Wifi Guest Accounts===

Open '''Users''' tab and create N'''ew User''' for your WiFi.
[[File:Ironguest.png|border|center|1388x1388px]]
Type '''Username''' and click '''Create User.'''
[[File:Iron guest1.png|border|center]]
Click on your user.
[[File:Irongust6.png|border|center]]
To set a password click on the '''Password.'''
[[File:Ironpassowrd.png|border|center|776x776px]]


All created users is displayed under '''Users''' tab.
[[File:Ironguestg.png|border|center|1266x1266px]]
==Step 2: Router configuration ==

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should '''turn on "Advanced WebUI" mode'''. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
[[File:Networking rutx manual webui basic advanced mode.gif|border|center]]
===Creating wireless access point===

If you have already set up your wireless access point - skip this step.

* Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
* Go to the '''Network → Wireless''' page.
* '''Click 'Add'''' to create a new Wireless Access Point. Depending on your needs, choose a 2.4 GHz ('''1''') or 5 GHz ('''2''') Access Point.

[[File:Wifirut.png|border|center]]

Edit your new Access Point as below:

# Check '''Enable;'''
# Mode - '''Access Point''';
# ESSID - Your desired Extended Service Set Identifier name;
# Network - Choose the network you want to attach to this wireless interface or fill out the create field to define a new network.
[[File:APconfig1.png|border|center]]

Navigate to '''Wireless Security''' tab and choose your '''Encryption''' method '''(1)'''. When you are done, click '''Save & Apply (2)'''.

[[File:APsecu.png|border|center]]
===Set up hotspot===

Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press '''Add'''.

[[File:Hotspota.png|border|center]]

'''Hotspot configuration'''

In the '''General tab''' do the following steps:

# Check '''Enable;'''
# Authentication mode - '''Radius'''.
[[File:Hotspotgentab.png|border|center]]


Then go to '''Radius''' tab and enter the Radius server configuration details from cobot:

# '''RADIUS Servers''' - 35.189.111.2, 35.189.127.125;
# '''Authentication port''' - 22035;
# '''Accounting port''' - 22036;
# '''NAS Identifie'''r - 22035;
#'''Radius secret key''' - aG7ilh2QgAHR6exu;
# '''Save & Apply'''.
[[File:Irohotspot.png|border|center]]

==Test your Hotspot==

Try connecting to your router using computer or mobile phone.

* Select the newly created hotspot;
* After successful connection visit any website and you will be redirected to hotspot login page. Type your username and password;
* Click '''Login;'''
* You should see a message '''Authorization Successful;'''

[[File:Phonehostpotccobot.png|border|center]]


==See also==
ironwifi.com

[[Ironwifi.com Hotspot Configuration on Legacy firmware]]

[[Category:IoT]]