View source for What IP addresses and ports are used by RMS?

__TOC__

==Introduction==
This article lists IP addresses and TCP/UDP ports used by the Teltonika Networks RMS. 

Note: The IP addresses and ports listed in the RMS Management, RMS Connect and RMS VPN sections need to be reachable by the devices. If any of the functions are not necessary, corresponding IP addresses and ports may be ignored.

==Reaching RMS platform==
Reaching the RMS webpage requires access to the following IP addresses:

* '''18.196.62.30'''
* '''3.77.70.198'''

The above IP addresses use the following ports:

{|center class="wikitable" style="text-align: center;""
|- 
! Protocol !! Port number 
|- 
| TCP || 80
|-
| TCP || 443
|-
|}

==RMS Management==
RMS Management uses the following IP addresses:

* '''18.196.62.30'''
* '''3.69.112.66'''
* '''35.157.156.54'''
* '''18.157.218.160'''
* '''3.77.251.245'''
* '''3.78.70.211'''
* '''18.158.123.134'''

All of the IP addresses listed above use the following ports:
{|center class="wikitable" style="text-align: center;""
|- 
! Protocol !! Port number 
|- 
| TCP || 15009
|- 
| TCP || 15010
|-
| TCP || 15011
|-
| TCP || 15039 
|-
| TCP || 15040 
|-
{|center class="wikitable" style="text-align: center;""
! Maintenance ports
|-
| 15041 - 15100 
|-
|}

==RMS Connect==
RMS Connect uses the following IP address: '''18.192.27.240''' and the ports provided in the table below.

{|center class="wikitable" style="text-align: center;""
|- 
! Protocol !! Port number !! Service 
|- 
| TCP || 20022 || Remote SSH
|- 
| TCP || 20080 || Remote HTTP(S)
|-
| TCP || 20100 || Remote SFTP
|-
| TCP || 20120 || Remote Telnet
|-
| TCP || 23389 || Remote Desktop
|}


==RMS VPN==
RMS VPN uses the following IP addresses: 
* '''3.69.106.81''' (Germany)
* '''3.65.167.143''' (Germany)
* '''15.185.110.7''' (Bahrain)
* '''15.184.134.94''' (Bahrain)
* '''34.230.227.9''' (Eastern US - Virginia)
* '''44.205.223.152''' (Eastern US - Virginia)
* '''13.238.208.90''' (Australia)
* '''54.253.39.211''' (Australia)

{|center class="wikitable" style="text-align: center;""
|- 
! Protocol !! Port number 
|- 
| UDP || Random port in the [30000-39999] range
|- 
|}

<br>
<b style="color: #185bbb;">*</b> Although these are currently used ports, it is recommended to unblock all ports on specified IP addresses.

In most cases, access to these IP addresses shall not be an issue as usually none of the outgoing traffic is blocked.

However, where ISP blocks all non-standard ports or the SIM card is in a Private APN network/setup, you will have to inquire your ISP to allow the mentioned IP and Ports to be made available.

[[Category:RMS_FAQ]]