Jump to content
  • EN

RUT956 Relay to Open Collector Output: Revision history

RUT956 Hardware Application Examples > RUT956 Relay to Open Collector Output

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

19 February 2025

  • curprev 10:2410:24, 19 February 2025 TomasV talk contribs 557 bytes +557 Created page with "This section provides an example on how to connect a relay to RUT956 open collector output: File:Connecting relay to open collector output rut9.png '''Note:''' some relays have internal protection diode D. When connecting such relay you mustn’t mix up coil contacts. If you mix up such relay coil contacts you might cause permanent damage to the open collector output. For more information about digital output control and RUT956 Inputs/Outputs in general refer '''..." ★
Retrieved from "https://wiki.teltonika-networks.com/view/RUT956_Relay_to_Open_Collector_Output"