Template:Networking device manual device recovery: Difference between revisions

     <li>Default Address (LAN IP): <b>192.168.{{#switch:{{{series}}}|TRB14x|TRB5=2|#default=1}}.{{#switch:{{{series}}}|TAP200|TAP100=3|#default=1}}</b></li>

You can find the batch of your device on the [[{{{name}}} Product Labels|Product Labels]] sticker.

     <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUTX08|RUTX10=|#default=Start of the reboot will be indicated by the flashing {{#switch:{{{series}}}|TAP100=power led.|#default=of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}}}

     <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot. {{#ifeq:{{{sms}}}|1|{{#switch:{{{series}}}|TAP100=|#default=Signal strength LEDs indicate the elapsed time while holding the reset button. Start of the factory reset will be indicated by flashing of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs.}}|}} <br><b>NOTE</b>: the default button hold time value (min time 12 seconds, max time 20 seconds) can be changed in the {{#switch: {{{series}}}

| TRB14x|TRB2xx|TRB5 = gateway

| router's}} WebUI, from the <b>System → Administration → [[{{{name}}}_Administration#General|General]]</b> page.</li>

{{#switch: {{{series}}} | RUT9 | RUT2=

You can also perform a factory reset from the router's WebUI. To do so, login to the router and go to the Backup section found under the System tab (<b>System → Maintenance → Backup → [[{{{name}}}_Maintenance#Restore_default_settings|Restore default settings). In the very bottom of the page there's a <b>Restore</b> button that performs a chosen type of reset.

| #default=

You can also perform a factory reset from the router's WebUI. To do so, login to the router and go to the Backup section found under the System tab (<b>System → Maintenance → Backup → [[{{{name}}}_Maintenance#Restore_default_settings|Reset settings]]</b>). In the very bottom of the page there's a <b>Reset</b> button that performs a chosen type of reset.}}

You can perform a factory reset with the SMS Utilities <b>restore</b> rule. If the rule hasn't been disabled or changed in any way, all you need to do is send an SMS message to the {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5=gateway|#default=router}} containing the text:

  {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5=<b><gateway_password> restore</b> | #default=<b><router_password> restore</b>}}

Replace {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5=<i><gateway_password></i> | #default=<i><router_password></i>}} with your actual password. You can find more information on SMS Utilities rules <b>[[{{{name}}} Mobile Utilities|here]]</b>.|}}

If you agreed to perform a factory reset, next type in <b>reboot</b> and press "Enter". The {{#switch: {{{series}}} |TRB1xx|TRB2xx|TRB5=gateway|#default=router}} will be reset to it's factory settings and rebooted. The entire sequence of events should look like this:

  | RUT8xx|TRB14x|TRB5=