Template:Networking device manual device recovery: Difference between revisions
Template:Networking device manual device recovery (view source)
Revision as of 14:36, 28 October 2024
, 28 Octoberno edit summary
No edit summary |
|||
| Line 36: | Line 36: | ||
<ul> | <ul> | ||
<li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUTX08|RUTX10|RUT140|RUT142=|#default=Start of the reboot will be indicated by the flashing {{#switch:{{{series}}}|TAP100=power led.|#default=of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB1|TRB2|TRB2M|TRB16|=3|RUTX|RUTM|RUTC={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50|RUTC50=3|#default=5}}|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}}} | <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUTX08|RUTX10|RUT140|RUT142=|#default=Start of the reboot will be indicated by the flashing {{#switch:{{{series}}}|TAP100=power led.|#default=of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB1|TRB2|TRB2M|TRB16|=3|RUTX|RUTM|RUTC={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50|RUTC50=3|#default=5}}|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}}} | ||
<li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot. {{#ifeq:{{{sms}}}|1|{{#switch:{{{series}}}|TAP100=|#default=Signal strength LEDs indicate the elapsed time while holding the reset button. Start of the factory reset will be indicated by flashing of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB2M|TRB16|TRB1|TRB2|=3|RUTX|RUTM|RUTC={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50|RUTC50=3|#default=5}}|#default=5}} signal strength LEDs.}}|}} <br><b>NOTE</b>: the default button hold time value (min time 12 seconds, max time 20 seconds) can be changed in the | <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot. {{#ifeq:{{{sms}}}|1|{{#switch:{{{series}}}|TAP100=|#default=Signal strength LEDs indicate the elapsed time while holding the reset button. Start of the factory reset will be indicated by flashing of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB2M|TRB16|TRB1|TRB2|=3|RUTX|RUTM|RUTC={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50|RUTC50=3|#default=5}}|#default=5}} signal strength LEDs.}}|}} <br><b>NOTE</b>: the default button hold time value (min time 12 seconds, max time 20 seconds) can be changed in the device WebUI, from the <b>System → Administration → [[{{{name}}}_Administration#General|General]]</b> page.</li> | ||
</ul> | </ul> | ||