Changes

[[File:Networking_rutos_manual_device_recovery_option_reset_webui.png|border|class=tlt-border]]

[[File:Networking_rutos_manual_device_recovery_option_reset_webui.png|border|class=tlt-border]]

| #default=You can also perform a factory reset from the {{#switch: {{{series}}}|TRB14x|TRB2xx|TRB5|TRB16|TRB2M|TRB1|TRB2 = gateway's | TAP100|TAP200 = AP's | #default = router's}} WebUI. To do so, login to the {{#switch: {{{series}}}|TRB14x|TRB2xx|TRB5|TRB16|TRB2M|TRB1|TRB2 = gateway's | TAP100|TAP200 = AP's | #default = router's}} and go to the Backup section found under the System tab (<b>System → Maintenance → Backup → [[{{{name}}}_Maintenance#Restore_default_settings|Reset settings]]</b>). In the very bottom of the page there's a <b>Reset</b> button that performs a chosen type of reset.}}

| #default=You can also perform a factory reset from the {{#switch: {{{series}}}|TRB14x|TRB2xx|TRB5|TRB16|TRB2M|TRB1|TRB2 = gateway's | TAP100|TAP200 = AP's | #default = router's}} WebUI. To do so, login to the {{#switch: {{{series}}}|TRB14x|TRB2xx|TRB5|TRB16|TRB2M|TRB1|TRB2 = gateway | TAP100|TAP200 = AP | #default = router}} and go to the Backup section found under the System tab (<b>System → Maintenance → Backup → [[{{{name}}}_Maintenance#Restore_default_settings|Reset settings]]</b>). In the very bottom of the page there's a <b>Reset</b> button that performs a chosen type of reset.}}

Notice: A <b>Factory defaults</b> reset will remove all logs, SIM PIN's and RMS data that the device might have had.

Notice: A <b>Factory defaults</b> reset will remove all logs, SIM PIN's and RMS data that the device might have had.