1,015 bytes added
, 11:48, 4 December 2018
<table class="nd-mantable">
<tr>
<th>field name</th>
<th>value</th>
<th>description</th>
</tr>
<tr>
<td>Enable</td>
<td>yes | no; Default: <b>none</b></td>
<td>Toggles Modbus TCP ON or OFF</td>
</tr>
<tr>
<td>Port</td>
<td>integer [0..65535]; Default: <b>none</b></td>
<td>Specifies which port will be used for Modbus communication</td>
</tr>
<tr>
<td>Allow Remote Access</td>
<td>yes | no; Default: <b>no</b></td>
<td>Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above</td>
</tr>
<tr>
<td>Mobile Traffic Usage Logging</td>
<td>yes | no; Default: <b>no</b></td>
<td>Enables Mobile Traffic Usage Logging (can also be enabled from <b>Status → Mobile Traffic → Configuration</b>). <br> This is required in order to read mobile data usage information from Modbus registers</td>
</tr>
</table>