Template:Networking rut2xx manual modbus modbus tcp table

From Teltonika Networks Wiki
This is the approved revision of this page, as well as being the most recent.
Field Value Description
Enable yes | no; default: none Turns Modbus TCP on or off.
Port integer [0..65535]; default: none TCP port used for Modbus communications.
Allow Remote Access yes | no; default: no Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above.
Mobile Traffic Usage Logging yes | no; default: no Enables Mobile Traffic Usage Logging (can also be enabled from Status → Mobile Traffic → [[{{{name}}}_Mobile_Traffic#Configuration|Configuration]]).
This is required in order to read mobile data usage information from Modbus registers.