Line 46: |
Line 46: |
| Under VLAN 2 and choose the drop-down box under LAN 2 and select “Tagged”. Then do the same for VLAN 3 under LAN 3 drop-down box choose “Tagged”. | | Under VLAN 2 and choose the drop-down box under LAN 2 and select “Tagged”. Then do the same for VLAN 3 under LAN 3 drop-down box choose “Tagged”. |
| | | |
− | '''Note:''' You can Tag more than one VLAN for the Same Port with “Tagged”, meaning multiple Tagged VLANs can be used on the same Port. In this example I have turned on “Tagged” for VLAN 1 and VLAN 3 on LAN 3 for testing later. Click Save & Apply | + | '''Note:''' You can Tag more than one VLAN for the Same Port with “Tagged”, meaning multiple Tagged VLANs can be used on the same Port. In this example I have turned on “Tagged” for VLAN 1 and VLAN 3 on LAN 3 for testing later. Click Save & Apply |
| | | |
| [[File:Networking_rut_manual_vlan_tagged_based_device_settings_vlan_tagged_v1.png|border|class=tlt-border]] | | [[File:Networking_rut_manual_vlan_tagged_based_device_settings_vlan_tagged_v1.png|border|class=tlt-border]] |
Line 53: |
Line 53: |
| | | |
| Go to Network>>Interfaces | | Go to Network>>Interfaces |
| + | |
| + | Click “edit” on the new LAN interfaces. |
| + | |
| + | In the configuration window, choose the "Physical Settings" tab and add the Ethernet port you choose to assign to the LAN. ''In this case I assigned VLAN 2 to LAN_2 on Ethernet port 2.'' Click Save & Apply |
| + | |
| | | |
| [[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_physical_settings_v1.png|border|class=tlt-border]] | | [[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_physical_settings_v1.png|border|class=tlt-border]] |
| | | |
− | | + | The new LAN interface should now show active. |
| | | |
| [[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_interfaces_v1.png|border|class=tlt-border]] | | [[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_interfaces_v1.png|border|class=tlt-border]] |
Line 62: |
Line 67: |
| =Testing VLAN Configuration= | | =Testing VLAN Configuration= |
| | | |
| + | Navigate to System>>CLI |
| + | |
| + | Sign into the CLI and run route-n command and should see something like the following |
| | | |
| [[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_routes_v1.png|border|class=tlt-border]] | | [[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_routes_v1.png|border|class=tlt-border]] |