VLAN: Tag-Based RUTOS: Difference between revisions

VLAN: Tag-Based RUTOS (view source)

454 bytes added , 12 August 2022

no edit summary

46

edits

@@ Line 20: / Line 20: @@
 [[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_protocol_v1.png|border|class=tlt-border]]
-Add the new IP address for the LAN interface and click Save & Apply.
+Add the new IP address for the LAN interface
-Note: The LANS must be on a different subnet from each other. For example: LAN 192.168.1.1,LAN_2, 192.168.10.1, LAN_3 192.168.15.1
+'''Note:''' The LANS must be on a different subnet from each other. For example: LAN 192.168.1.1,LAN_2, 192.168.10.1, LAN_3 192.168.15.1
 [[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_ip_address_v1.png|border|class=tlt-border]]
@@ Line 40: / Line 40: @@
 [[File:Networking_rut_manual_vlan_tagged_based_device_settings_add_vlan_v1.png|border|class=tlt-border]]
+Go to VLAN 1 and turn off “Untagged” for LAN 2 and LAN 3.
 [[File:Networking_rut_manual_vlan_tagged_based_device_settings_vlan_off_v1.png|border|class=tlt-border]]
+Under VLAN 2 and choose the drop-down box under LAN 2 and select “Tagged”.  Then do the same for VLAN 3 under LAN 3 drop-down box choose “Tagged”.
+'''Note:''' You can Tag more than one VLAN for the Same Port with “Tagged”, meaning multiple Tagged VLANs can be used on the same Port.  In this example I have turned on “Tagged” for VLAN 1 and VLAN 3 on LAN 3 for testing later. Click Save & Apply
 [[File:Networking_rut_manual_vlan_tagged_based_device_settings_vlan_tagged_v1.png|border|class=tlt-border]]