Line 35: |
Line 35: |
| First, you need to obtain GPL from https://teltonika-networks.com/gpl. Now you need to run “make menuconfig” command inside GPL folder. | | First, you need to obtain GPL from https://teltonika-networks.com/gpl. Now you need to run “make menuconfig” command inside GPL folder. |
| | | |
− | [[File:cummakeconfig.png]] | + | [[Image:Cloud of things package installing 1.png]] |
| | | |
| You need to add example application so it can be built. Navigate to “Network” section and select “cmstreamapp” with spacebar key. It will show “<*>” once application is added, see below: | | You need to add example application so it can be built. Navigate to “Network” section and select “cmstreamapp” with spacebar key. It will show “<*>” once application is added, see below: |
| | | |
− | [[File:cumnetworksection.png]] | + | [[Image:Cloud of things package installing 2.png]] |
| | | |
| Now do the same with “Luci” section, “Applications → luci-app-iot”. This will enable to configure example package from router control panel, see below for example: | | Now do the same with “Luci” section, “Applications → luci-app-iot”. This will enable to configure example package from router control panel, see below for example: |
| | | |
− | [[File:cumlucisection.png]] | + | [[Image:Cloud of things package installing 3.png]] |
| + | |
| + | [[Image:Cloud of things package installing 4.png]] |
| + | |
| + | [[Image:Cloud of things package installing 5.png]] |
| + | |
| + | [[Image:Cloud of things package installing 6.png]] |
| | | |
| Everything should be ready and you can exit. Now run “make” command and firmware will appear in “bin/ar71xx/tltFws” directory. You can flash “GPL_…._WEBUI.bin” file. | | Everything should be ready and you can exit. Now run “make” command and firmware will appear in “bin/ar71xx/tltFws” directory. You can flash “GPL_…._WEBUI.bin” file. |