Changes

First, you need to obtain GPL from https://teltonika-networks.com/gpl. Now you need to run “make menuconfig” command inside GPL folder.

First, you need to obtain GPL from https://teltonika-networks.com/gpl. Now you need to run “make menuconfig” command inside GPL folder.

[[File:cummakeconfig.png]]

[[Image:Cloud of things package installing 1.png]]

You need to add example application so it can be built. Navigate to “Network” section and select “cmstreamapp” with spacebar key. It will show “<*>” once application is added, see below:

You need to add example application so it can be built. Navigate to “Network” section and select “cmstreamapp” with spacebar key. It will show “<*>” once application is added, see below:

[[File:cumnetworksection.png]]

[[Image:Cloud of things package installing 2.png]]

Now do the same with “Luci” section,  “Applications → luci-app-iot”. This will enable to configure example package from router control panel, see below for example:

Now do the same with “Luci” section,  “Applications → luci-app-iot”. This will enable to configure example package from router control panel, see below for example:

[[File:cumlucisection.png]]

[[Image:Cloud of things package installing 3.png]]

 

 

 

[[Image:Cloud of things package installing 6.png]]

Everything should be ready and you can exit. Now run “make” command and firmware will appear in “bin/ar71xx/tltFws” directory. You can flash “GPL_…._WEBUI.bin” file.

Everything should be ready and you can exit. Now run “make” command and firmware will appear in “bin/ar71xx/tltFws” directory. You can flash “GPL_…._WEBUI.bin” file.