Line 81: |
Line 81: |
| # Write '''RUT Public IP'''. | | # Write '''RUT Public IP'''. |
| # Add '''Pre Shared Key''' (a shared password used for authentication between the peers. The value of this field must match on both instances). | | # Add '''Pre Shared Key''' (a shared password used for authentication between the peers. The value of this field must match on both instances). |
− | # Disable '''Minimum Key complexity''. | + | # Disable '''Minimum Key complexity'''. |
| # Select '''Local Identifier Type''' (IP address). | | # Select '''Local Identifier Type''' (IP address). |
| # Write '''Local Identifier''' (Cisco LAN IP address). | | # Write '''Local Identifier''' (Cisco LAN IP address). |
| # Select '''Local IP Type''' (Subnet). | | # Select '''Local IP Type''' (Subnet). |
− | # IP Address: Local network | + | # Write '''IP Address''' (Cisco local network). |
− | # Subnet Mask: Network Mask | + | # Add '''Subnet Mask''' (network mask). |
− | # Remote Identifier Type: Remote WAN IP | + | # Select '''Remote Identifier Type''' (Remote WAN IP). |
− | # Remote Identifier: 192.168.10.1 | + | # Write '''Remote Identifier''' (RUT LAN IP). |
− | # Remote IP Type: Subnet | + | # Select '''Remote IP Type''' (Subnet). |
− | # IP Address: 192.168.10.0 | + | # Add '''IP Address''' (RUT local network). |
− | # Subnet Mask: 255.255.255.0 | + | # Add '''Subnet Mask''' (RUT local network mask). |
| | | |
| ==Testing the setup== | | ==Testing the setup== |