Changes

[[File:Networking_rutxxx_configuration_example_ipsec_cisco_s2s_v2.png|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_ipsec_cisco_s2s_v2.png|border|class=tlt-border]]

# Enable it.

# '''Enable''' it.

# Connection Name: RUT

# Select '''IPsec Profile''' (RUT).

# IPsec Profile: RUT

# Set '''Interface''' (your internet source).

# Interface: Internet Source

# Select '''Remote Endpoint''' (static IP).

# Remote Endpoint: Static IP, RUT Public IP

# Write '''RUT Public IP'''.

# Pre Shared Key: 123456

# Add '''Pre Shared Key''' (a shared password used for authentication between the peers. The value of this field must match on both instances).

# Minimum Key complexity: Disabled

# Disable '''Minimum Key complexity''.

# Local Identifier: IP Address

# Select '''Local Identifier Type''' (IP address).

# Local Identifier: Cisco subnet IP address

# Write '''Local Identifier''' (Cisco LAN IP address).

# Local IP Type: Subnet

# Select '''Local IP Type''' (Subnet).

# IP Address: Local network

# IP Address: Local network

# Subnet Mask: Network Mask

# Subnet Mask: Network Mask