Stunnel configuration example using Telnet: Difference between revisions
Stunnel configuration example using Telnet (view source)
Revision as of 06:35, 16 December 2022
, 16 December 2022no edit summary
No edit summary |
No edit summary |
||
| Line 26: | Line 26: | ||
* Stunnel application installation in your laptop: [https://www.stunnel.org/downloads.html stunnel Download] | * Stunnel application installation in your laptop: [https://www.stunnel.org/downloads.html stunnel Download] | ||
[[File:Networking Rut955 manual stunnel toplogy v1.png|border]] | |||
As mentioned earlier, here, in this configuration since telnet does not provide security, we are going to develop a Stunnel in between the router and the client, and then connect them using telnet protocol, so that there is encryption provided to the data. For this we will use Wireshark to capture the packets and verify if the data has been encrypted or not. | As mentioned earlier, here, in this configuration since telnet does not provide security, we are going to develop a Stunnel in between the router and the client, and then connect them using telnet protocol, so that there is encryption provided to the data. For this we will use Wireshark to capture the packets and verify if the data has been encrypted or not. | ||