1,108
edits
Changes
no edit summary
'''Note''': It is a additional software that can be installed from the '''Services → [[RUT955_Package_Manager|Package Manager]]''' page.
'''Note''': It is a additional software that can be installed from the '''Services → [[RUT955_Package_Manager|Package Manager]]''' page.
== BACnet MS/TP configuration ==
== BACnet ==
=== BACnet ===
=== BACnet ===
----
----
Install the BACnet package on RUT955 and navigate to '''Services → BACnet''' and '''enable''' the '''instance'''. Everything else can be left as default or changed according to your needs.
Install the BACnet package on RUT955 and navigate to '''Services → BACnet''' and '''enable (1)''' the '''instance'''. Everything else can be left as default or changed according to your needs.
[[File:BACnet enable instance.png|border|center|class=tlt-border|822x208px]]
=== Server ===
=== Server ===
----
----
For the server, Yet Another BACnet Explorer (YABE) is used. Open the software and '''click''' on '''add device'''
For the server, Yet Another BACnet Explorer (YABE) is used. Open the software and '''click''' on the '''green plus sign''' to add a new device. Then a new window will pop up, there select '''local endpoint IP address''' and leave everything else as default or change according to your needs.
[[File:Yabe configuration add device.png|border|center|class=tlt-border|638x447px]]
Select newly created communication node and right - click on it to send '''WhoIs''' request (application might send these automatically).
Select newly created communication node and right - click on it to send '''WhoIs''' request (application might send these automatically).
== BACnet/IP configuration ==
== BACnet/IP configuration ==
This is the most commonly used type of BACnet, which is designed to work over Ethernet networks using the Internet Protocol (IP). It supports both IPv4 and IPv6 addressing.
This is the most commonly used type of BACnet, which is designed to work over Ethernet networks using the Internet Protocol (IP). It supports both IPv4 and IPv6 addressing.
=== BACnet ===
=== Router 1 ===
----
==== BACnet ====
----
Install the BACnet package on RUT955 and navigate to '''Services → BACnet''' → '''enable''' the '''instance''' and '''BBMD'''. Everything else can be left as default or changed according to your needs.
<<SCREENSHOT>>
==== Firewall ====
----
The configuration will also require you to add port forward rule in the firewall configuration. To do that, open Router1 WebUI and navigate to '''Network → Firewall → Port Forwards'''. Create a port forward rule to forward UDP packets from Router2 WAN to Router1 LAN address port.
<<SCREENSHOT>>
'''Note''': When YABE sends registration packets you will need to find out which port YABE is using (One way is to look through the traffic with wireshark on your PC or TCP dump on router 1 or router 2)
If you restart YABE software or delete and create new communication device, YABE might use different port number, and you will need to change port forward configured in router connected to your PC.
==== Server ====
----
Open YABE and create IP communication node by click on '''add device'''.
<<SCREENSHOT>>
Then select the node and go to '''Meniu → Functions → IP services → Foreign device registration''' and enter public IP address of Router2 (the one connected to controller).
<<SCREENSHOT>>
=== Router 2 ===
----
==== BACnet ====
----
----
Install the BACnet package on RUT955 and navigate to '''Services → BACnet''' → '''enable''' the '''instance''' and '''BBMD'''. Everything else can be left as default or changed according to your needs.
Install the BACnet package on RUT955 and navigate to '''Services → BACnet''' → '''enable''' the '''instance''' and '''BBMD'''. Everything else can be left as default or changed according to your needs.
<<SCREENSHOT>>
<<SCREENSHOT>>
=== Firewall ===
==== Firewall ====
----
----
The configuration will also require you to add port forward rule in the firewall configuration. To do that, open Router1 WebUI and navigate to '''Network → Firewall → Port Forwards'''. Create a port forward rule to forward UDP packets from Router2 WAN to Router1 LAN address port.
The configuration will also require you to add port forward rule in the firewall configuration. To do that, open Router1 WebUI and navigate to '''Network → Firewall → Port Forwards'''. Create a port forward rule to forward UDP packets from Router2 WAN to Router1 LAN address port.
If you restart YABE software or delete and create new communication device, YABE might use different port number, and you will need to change port forward configured in router connected to your PC.
If you restart YABE software or delete and create new communication device, YABE might use different port number, and you will need to change port forward configured in router connected to your PC.
=== Server ===
==== Server ====
----
----
Open YABE and create IP communication node by click on '''add device'''.
Open YABE and create IP communication node by click on '''add device'''.