Command Line Interfaces RutOS: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.4'''] firmware version .</p>
==Introduction==
==Introduction==


A '''command line interface''' ('''CLI''') is a means of interacting with a computer program or system where the user (or client) issues commands to the program in the form of successive lines of text (command lines). A program that handles the interface is called a '''command language interpreter''' or '''shell'''.
A '''command line interface''' ('''CLI''') is a means of interacting with a computer program or system where the user (or client) issues commands to the program in the form of successive lines of text (command lines). A program that handles the interface is called a '''command language interpreter,''' or '''shell'''.


Teltonika-Networks devices support a variety of different command line interfaces all of which will be described in this article. Only the methods of reaching and logging in via a specified CLI will be described here and not any specific command usage.
Teltonika-Networks devices support a variety of different command line interfaces, all of which will be described in this article. Only the methods of reaching and logging in via a specified CLI will be described here, not any specific command usage.


In all cases, CLI login information for Teltonika-Networks devices routers is:
In all cases, the CLI login information for Teltonika-Networks devices is:


* User name: '''root'''
* User name: '''root'''
Line 12: Line 14:
==CLI (WebUI)==
==CLI (WebUI)==


RUTxxx routers have a command line interface built-in to their '''Web User Interfaces''' ('''WebUI'''). This is the most accessible method because all you need is a web browser.
Teltonika Networks routers and gateways have a command-line interface built-in to their '''Web User Interfaces''' ('''WebUI'''). This is the most accessible method because all you need is a web browser.  
----
* Simply log in to the WebUI by typing the router's LAN IP address into the URL field of your web browser and press "Enter" on your keyboard;
* After this, you will be greeted with the login window. Type in the user name '''admin''' and the router's admin password and click "Login".


[[File:RutOS WebUI Login fixed.png|border|class=tlt-border]]
To access the WebUI CLI, '''log in to the WebUI''', and navigate to '''System → CLI'''. Type in the login name "'''root'''" and the '''router's admin password'''. You should be greeted with a message such as this:


* Then locate the CLI section under the System tab;
[[File:RutOS WebUI CLI logged in fixed 2.png|border|center|class=tlt-border|781x467px]]
* Type in the login name ''root'', press "Enter", type in the router's admin password and press "Enter" again. You should be greeted with a message such as this:


[[File:RutOS WebUI CLI logged in fixed.png|border|class=tlt-border]]
==SSH==
==SSH==


Line 29: Line 26:
===Linux===
===Linux===
----
----
Linux operating systems support many applications that can be used to log in to a RUTxxx router via SSH, but the most common is '''Terminal''', which we'll be using for this example.
Linux operating systems support many applications that can be used to log in to a router or a gateway via SSH, but the most common is '''Terminal''', which we'll be using for this example.
 
* Open a new Terminal window, type '''ssh [email protected]''' and press "Enter". If this is your first time logging in, you might be asked to clarify whether you really want to log in. In that case, just type '''yes''' and press "Enter". Then type in the router's admin password and press "Enter" to finish the login process:


[[File:SSH linux login v3.png|border|class=tlt-border]]
Open a new Terminal window, type '''ssh [email protected].''' If this is your first time logging in, you might be asked to clarify whether you really want to log in. In that case, just type '''yes'''. Then type in the '''router's admin password''' to finish the login process.


After this, you should be greeted with a window such as the one depicted in the figure above.
[[File:Ubuntu_SSH_login.png|border|center|class=tlt-border|617x375px]]


====RSA key====
====RSA key====
 
----
There is a possibility to use an RSA key instead of a password when logging in via SSH. This process is described '''[[SSH RSA key authentication (Linux)|here]]''' in detail.
There is a possibility to use an RSA key instead of a password when logging in via SSH. This process is described '''[[SSH RSA key authentication (Linux)|here]]''' in detail.


===Windows===
===Windows===
----
----
To login to a RUTxxx router via SSH using a Windows OS you will need an SSH client application. The most common is '''PuTTY''' - free, open source SSH and Telnet client, which we'll be using for this example. You can download PuTTY from '''[https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html here]'''.
To access SSH on the Windows OS, you will need an SSH client application. The most common is '''PuTTY''' - free, open source SSH and Telnet client, which we'll be using for this example. You can download PuTTY from '''[https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html here]'''.
----
 
* Launch PuTTY and select the '''SSH''' option under the "Connection type" field. Type in the router's LAN IP address into the "Host Name (or IP address)" field, specify the SSH port into the "Port" field ('''22''' by default), and click "Open":
Launch PuTTY and select the '''SSH''' option. Type in the '''router's LAN IP address''' into the '''"Host Name (or IP address)"''' field, specify the SSH port into the '''"Port"''' field ('''22''' by default), and '''click "Open"''':


[[File:Putty login 1 v2.PNG|border|class=tlt-border]]
[[File:SSH Putty login.png|border|center|class=tlt-border|454x442px]]
----
* In the next window type in the login name ''root'', press "Enter", type in the router's admin password and press "Enter" again. You should be greeted with a message such as this:


[[File:Putty login v3.png|border|class=tlt-border]]
In the next window, type in the login name '''root''' and the '''router's admin password'''. You should be greeted with a message such as this:


*Newer Windows 10 editions already have a built-in SSH client. see https://docs.microsoft.com/en-us/windows/terminal/tutorials/ssh
[[File:SSH Putty logged in.png|border|center|class=tlt-border|821x450px]]


'''Note:''' Newer Windows 10 editions already have a built-in SSH client. see https://docs.microsoft.com/en-us/windows/terminal/tutorials/ssh
==== RSA key====
----
----
==== RSA key====
There is a possibility to use an RSA key instead of a password when logging in via SSH. This process is described '''[[SSH RSA key authentication (Windows)|here]]''' in detail.
There is a possibility to use an RSA key instead of a password when logging in via SSH. This process is described '''[[SSH RSA key authentication (Windows)|here]]''' in detail.


==RS232/RS485 console (only with RUT955)==
==RS232/RS485 console (only with RUT955)==


It is also possible to control a RUT955 router via RS232 or RS485 consoles. For this, however, you will need the adequate cables:
It is also possible to control routers or gateways via RS232 or RS485 consoles if they have those serial ports. For this, you will need the adequate cables:
<font size="-1">
 
{| class="wikitable" style="border:2px solid white; background: white"
{| class="wikitable" style="border:2px solid white; background: white"
|+
|+
Line 70: Line 63:
| style="border:1px solid white; width: 400px" |'''USB to RS232 (Male) cable''' <br> [[File:Usb to rs232 male.png|187px|left]]
| style="border:1px solid white; width: 400px" |'''USB to RS232 (Male) cable''' <br> [[File:Usb to rs232 male.png|187px|left]]
|-
|-
|}
|}You can log in to the RS485 console with a 2-wire cable or you can use the RS485 jack that comes with the router for one end; the other end of the cable basically depends on your end device's capabilities (it can be USB, RS232, etc.)
</font>


You can log in to the RS485 console with a 2-wire cable. You can use the RS485 jack that comes with the router for one end; the other end of the cable basically depends on your end device's capabilities (it can be USB, RS232, etc.)
===Router configuration===
----The configuration on the device side is fairly simple. Just '''log in to the device WebUI''', go to '''Services → Serial Utilities → Console,''' enable the instance, and configure the rest according to your serial device settings. In the example below, default values were used.


===Router configuration===
[[File:Rs232 console configuration v4.png|border|center|class=tlt-border|627x416px]]
 
===Linux===
----
----
*The configuration for the router's side is fairly simple. Just log in to the router's WebUI, go to '''Services → RS232/RS485''', place a checkmark next to the "Enable" field and select "Serial type: Console" (the same is true for both RS232 and RS485):
To login from a Linux PC, you'll need an application for serial communication like '''minicom''' or '''gtkterm'''. For this example, we'll be using minicom. You can download it by typing these lines into the Terminal:


[[File:Rs232 console configuration v4.png|border|class=tlt-border]]
<code><span class="highlight">'''sudo apt-get update'''</span></code> - downloads a list of newest software packages.


You can leave the rest of the settings as defaults or set them in accordance with your needs. Don't forget to click save after you have made the changes.
<code><span class="highlight">'''sudo apt-get install minicom'''</span></code> - downloads and installs minicom.


===Linux===
Once you have installed minicom, you can run it with the command <code><span class="highlight">'''sudo minicom'''</span></code> from the Linux Terminal. This will open a new console window where you will need to set some things up. Press '''Ctrl + A''' at once on your keyboard, then press '''"Z"''' which will direct you to the settings menu:
----
* To login from a Linux PC, you'll need an application for serial communication like '''minicom''' or '''gtkterm'''. For this example, we'll be using minicom. You can download it by typing these lines into the Terminal:


$ sudo apt-get update
[[File:Minicom settings v2.png|border|center|class=tlt-border|757×468px]]
$ sudo apt-get install minicom


'''update''' downloads a list of newest software packages; '''install minicom''' downloads and installs minicom.
Then press '''"O"''' on your keyboard. This will direct you to the main settings menu. From there you should specify the name of the serial device and the same parameters that you entered in the router's configuration. A picture with corresponding parameters is presented below:
----
*Once you've installed minicom, you can run it with the command '''sudo minicom''' from the Linux Terminal. This will open a new console window where you will need to set some things up. Press '''Ctrl + A''' at once on your keyboard, then press "Z" which will direct you to the settings menu:


[[File:Minicom settings v2.png|border|class=tlt-border]]
[[File:Minicom settings port v3.png|border|center|class=tlt-border|757×468px]]
----
*Press "O" on your keyboard. This will direct you to the main settings menu. From there you should specify the name of the serial device and the same parameters that you entered in the router's configuration. A picture with corresponding parameters is presented below:


[[File:Minicom settings port v2.png|border|class=tlt-border]]
Once done, press '''"Enter"'''. In the next menu, you can save these settings as defaults by selecting '''Save setup as dfl''' so that you would not need to set everything up the next time you use the console.


Once done, press "Enter". In the next menu, you can save these settings as defaults by selecting '''Save setup as dfl''' so that you wouldn't need to set everything up the next time you use the console.
To access the console, press '''"Esc"''' on your keyboard. It will take you to a login window - there enter the login name '''root''' and the '''router's admin password'''.  
----
*Press "Esc" on your keyboard to return to the console window and type in the login name ''root'', press "Enter", type in the router's admin password, and press "Enter" again. After this, you will be able to use the RS232/RS485 console.


===Windows===
===Windows===
----
----
To log in from a Windows PC, you'll need an application for serial communication. The most common is '''PuTTY''' - a free, open source SSH and Telnet client, which we'll be using for this example. You can download PuTTY from '''[https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html here]'''.
To log in from a Windows PC, you'll need an application for serial communication. The most common is '''PuTTY''' - a free, open source SSH and Telnet client, which we'll be using for this example. You can download PuTTY from '''[https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html here]'''.
----
*First you must find out which '''Serial line''' (or '''COM port''') your cable uses. To do so, go to Windows '''Device Manager''' (you can find it easily via the search field or in the Control Panel). Find '''Ports (COM & LPT)''' in the device list and expand that section. Locate your serial device (depends on the type of cable) and take note of its '''COM port number''' ('''COM3''' in our example):


[[File:Putty serial login 1 v2.PNG|border|class=tlt-border]]
First you must find out which '''Serial line''' (or '''COM port''') your cable uses. To do so, go to Windows '''Device Manager''' (you can find it easily via the search field or in the Control Panel). Find '''Ports (COM & LPT)''' in the device list and expand that section. Locate your serial device (depends on the type of cable) and take note of its '''COM port number''' ('''COM3''' in our example):
----
 
*Launch PuTTY and select the '''Serial''' option under the "Connection type" field. Specify the COM port ('''COM3''' from our example) in the "Serial line" field  and the Baud rate from your router's configuration in the "Speed" field ('''115200''' from our example) and click "Open":
[[File:Putty serial login 1 v2.PNG|border|center|class=tlt-border|932×566px]]
 
Launch PuTTY and select the '''Serial''' option under the "Connection type" field. Specify the COM port ('''COM3''' from our example) in the "Serial line" field  and the Baud rate from your router's configuration in the "Speed" field ('''9600''' from our example) and click "Open":
 
[[File:Putty serial login 2 v3.PNG|border|center|class=tlt-border|477×472px]]


[[File:Putty serial login 2 v2.PNG|border|class=tlt-border]]
In the next window type in the login name ''root'' and the '''router's admin password'''. You should be greeted with a message such as this:
----
* In the next window type in the login name ''root'', press "Enter", type in the router's admin password, and press "Enter" again. You should be greeted with a message such as this:


[[File:Putty serial login 3 v2.PNG|border|class=tlt-border]]
[[File:Putty serial login 3 v3.PNG|border|center|class=tlt-border|640×393px]]


== See also==
== See also==

Revision as of 16:09, 22 March 2023

Main Page > General Information > Configuration Examples > Router control and monitoring > Command Line Interfaces RutOS

The information on this page is updated in accordance with the 00.07.4 firmware version .

Introduction

A command line interface (CLI) is a means of interacting with a computer program or system where the user (or client) issues commands to the program in the form of successive lines of text (command lines). A program that handles the interface is called a command language interpreter, or shell.

Teltonika-Networks devices support a variety of different command line interfaces, all of which will be described in this article. Only the methods of reaching and logging in via a specified CLI will be described here, not any specific command usage.

In all cases, the CLI login information for Teltonika-Networks devices is:

  • User name: root
  • Password: router's admin password

CLI (WebUI)

Teltonika Networks routers and gateways have a command-line interface built-in to their Web User Interfaces (WebUI). This is the most accessible method because all you need is a web browser.

To access the WebUI CLI, log in to the WebUI, and navigate to System → CLI. Type in the login name "root" and the router's admin password. You should be greeted with a message such as this:

SSH

Secure Shell (SSH) is a cryptographic network protocol for operating network services securely over an unsecured network. The best-known example application is for remote login to computer systems by users. The login process is different for different operating systems. Therefore, this section is split into two parts: Linux and Windows.

Linux


Linux operating systems support many applications that can be used to log in to a router or a gateway via SSH, but the most common is Terminal, which we'll be using for this example.

Open a new Terminal window, type ssh [email protected]. If this is your first time logging in, you might be asked to clarify whether you really want to log in. In that case, just type yes. Then type in the router's admin password to finish the login process.

RSA key


There is a possibility to use an RSA key instead of a password when logging in via SSH. This process is described here in detail.

Windows


To access SSH on the Windows OS, you will need an SSH client application. The most common is PuTTY - free, open source SSH and Telnet client, which we'll be using for this example. You can download PuTTY from here.

Launch PuTTY and select the SSH option. Type in the router's LAN IP address into the "Host Name (or IP address)" field, specify the SSH port into the "Port" field (22 by default), and click "Open":

In the next window, type in the login name root and the router's admin password. You should be greeted with a message such as this:

Note: Newer Windows 10 editions already have a built-in SSH client. see https://docs.microsoft.com/en-us/windows/terminal/tutorials/ssh

RSA key


There is a possibility to use an RSA key instead of a password when logging in via SSH. This process is described here in detail.

RS232/RS485 console (only with RUT955)

It is also possible to control routers or gateways via RS232 or RS485 consoles if they have those serial ports. For this, you will need the adequate cables:

Straight-through Female/Male RS232 cable
Null-modem (crossed) Male/Male RS232 cable
USB to RS232 (Male) cable

You can log in to the RS485 console with a 2-wire cable or you can use the RS485 jack that comes with the router for one end; the other end of the cable basically depends on your end device's capabilities (it can be USB, RS232, etc.)

Router configuration


The configuration on the device side is fairly simple. Just log in to the device WebUI, go to Services → Serial Utilities → Console, enable the instance, and configure the rest according to your serial device settings. In the example below, default values were used.

Linux


To login from a Linux PC, you'll need an application for serial communication like minicom or gtkterm. For this example, we'll be using minicom. You can download it by typing these lines into the Terminal:

sudo apt-get update - downloads a list of newest software packages.

sudo apt-get install minicom - downloads and installs minicom.

Once you have installed minicom, you can run it with the command sudo minicom from the Linux Terminal. This will open a new console window where you will need to set some things up. Press Ctrl + A at once on your keyboard, then press "Z" which will direct you to the settings menu:

757×468px
757×468px

Then press "O" on your keyboard. This will direct you to the main settings menu. From there you should specify the name of the serial device and the same parameters that you entered in the router's configuration. A picture with corresponding parameters is presented below:

757×468px
757×468px

Once done, press "Enter". In the next menu, you can save these settings as defaults by selecting Save setup as dfl so that you would not need to set everything up the next time you use the console.

To access the console, press "Esc" on your keyboard. It will take you to a login window - there enter the login name root and the router's admin password.

Windows


To log in from a Windows PC, you'll need an application for serial communication. The most common is PuTTY - a free, open source SSH and Telnet client, which we'll be using for this example. You can download PuTTY from here.

First you must find out which Serial line (or COM port) your cable uses. To do so, go to Windows Device Manager (you can find it easily via the search field or in the Control Panel). Find Ports (COM & LPT) in the device list and expand that section. Locate your serial device (depends on the type of cable) and take note of its COM port number (COM3 in our example):

932×566px
932×566px

Launch PuTTY and select the Serial option under the "Connection type" field. Specify the COM port (COM3 from our example) in the "Serial line" field and the Baud rate from your router's configuration in the "Speed" field (9600 from our example) and click "Open":

477×472px
477×472px

In the next window type in the login name root and the router's admin password. You should be greeted with a message such as this:

640×393px
640×393px

See also

External links