Open main menu
Home
Random
Log in
Settings
COMMUNITY
ABOUT
Disclaimers
Teltonika Networks Wiki
Search
Changes
← Older edit
WireGuard Configuration Example
(view source)
Revision as of 15:19, 3 October 2023
38 bytes added
,
15:19, 3 October 2023
no edit summary
Line 6:
Line 6:
This page will show you an example on how to configure a basic tunnel between WireGuard interface and its peers.
This page will show you an example on how to configure a basic tunnel between WireGuard interface and its peers.
−
<u><b>Note:</b> WireGuard is additional software that can be installed from the <b>
Services
→ Package Manager</b> page.</u>
+
<u><b>Note:</b> WireGuard is additional software that can be installed from the <b>
System
→ Package Manager</b> page.</u>
==Prerequisites==
==Prerequisites==
Line 13:
Line 13:
<li>Two RUTOS devices (this example will be written with RUTX09 and TRB141 in particular)</li>
<li>Two RUTOS devices (this example will be written with RUTX09 and TRB141 in particular)</li>
<li>An end device to configure devices (PC, Laptop, Tablet or Smartphone)</li>
<li>An end device to configure devices (PC, Laptop, Tablet or Smartphone)</li>
−
<li>One
end device
must have <b>Public</b> IP address</li>
+
<li>One
of the RUTOS devices
must have <b>Public</b> IP address</li>
==End results==
==End results==
Line 127:
Line 127:
If you dont see <b>latest handshake</b> line, then ping the <b>Public IP address</b> you specified in
If you dont see <b>latest handshake</b> line, then ping the <b>Public IP address</b> you specified in
−
<b>Endpoint Host</b> field.
+
<b>Endpoint Host</b> field
, this will initiate handshake
.
ping XX.XX.XX.XX
ping XX.XX.XX.XX
Kristijonasb
Administrators
106
edits