Disable LAN Ports: Difference between revisions

(10 intermediate revisions by 2 users not shown)

Line 1:

~~You can disable specific LAN ports by using the VLAN feature~~.

The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.06.3'''] firmware version.

~~Login to your~~ device~~'s WebUI and navigate~~ to ~~the Network~~ -> VLAN~~ page~~. ~~From there~~, ~~you can select which LAN ports should be active and which should not~~.

Disabling LAN ports may vary depending on the device. On some, you can disable ports through LAN interface settings, while on others, you need to use Port-based VLAN. Additionally, some devices may require disabling through Port settings.

~~RUT Routers~~

==Disabling ports using LAN interface settings==

Navigate to "Network" -> "LAN" and click on "Edit" for the existing LAN interface.

[[File:Networking faq disable lan ports interface 1 v3.png|border|class=tlt-border]]

In the new popup window, go to "Physical Settings" and remove all interfaces from the "Interface" section.

[[File:Networking faq disable lan ports interface 2 v1.png|border|class=tlt-border]]

These instructions are for the following devices:

<ul>

</ul>

==Disabling ports using Port-based VLANs==

Go to '''Network -> VLAN -> Port based'''. Choose the desired ports and select the "Off" option. Press "Save & Apply".

[[File:Networking rut faq disable lan ports v2.png|border|class=tlt-border]]

These instructions are for the following devices:

<ul>

</ul>

==Disabling ports using Ports settings==

Navigate to '''Network -> Ports -> Ports Settings'''. Select the desired ports and click on "Edit ports."

[[File:Networking rutx faq disable lan ports 1 v2.png|border|class=tlt-border]]

In the new window, disable the ports by turning the "Enable" slider off. Finally, press "Save & Apply".

[[File:Networking rutx faq disable lan ports 2 v2.png|border|class=tlt-border]]

These instructions are for the following devices:

<ul>

<li style="margin-bottom: 5px;">[[RUTXR1|RUTXR1]]</li>

</ul>

~~[[File:Networking_rut_faq_disable_lan_ports_v1.png|border|class=tlt-border]]~~

~~----~~

~~RUTX Routers~~

~~[[File:Networking_rutx_faq_disable_lan_ports_v1.png|border|class=tlt-border]]~~

----

'''Important note''': if you disable all LAN ports on the router, you will lose access to the router via Ethernet. To regain access to the router you can:

'''Important note''': if you disable all LAN ports on the router, you will lose access to the router via Ethernet. To regain access to the router you can:

*login to the router's wireless access point (AP) (provided that you assigned a wireless access point to the VLAN configuration)

*login remotely [[How_to_reach_a_router's_WebUI_from_RMS%3F|via RMS]]

*login remotely [[~~How_can_I_access_my_router_remotely_through_the_WAN_interface%3F~~|via the router's public IP address]] (provided remote access was configured prior to VLAN)

*login remotely [[Remote WebUI Access|via the router's public IP address]] (provided remote access was configured prior to VLAN)

*login remotely via VPN (provided the VPN was configured prior to VLAN)

*[[Device Recovery Options|reset the router's configuration]] to its default state

[[Category:~~FAQ~~]]

[[Category:Control & Configuration]]