Difference between revisions of "TSW030 LEDs"
From Teltonika Networks Wiki
m (Vainius.l moved page Draft:TSW030 LEDs to TSW030 LEDs without leaving a redirect) |
(Created page with "{{Template:Networking device leds | name = TSW030 | series = TSW0 | file_power_led = Network_tsw030_manual_pwr_led.png | size_power_led = 400 | eth_leds = 1 }}") |
(No difference)
|
Revision as of 08:30, 8 May 2024
Main Page > TSW Switches > TSW030 > TSW030 Manual > TSW030 LEDsThis wiki page contains information about TSW030 switch LEDs and their actions.
Power LED
The power LED is located on the bottom left corner of the front panel, near the power connector:
It can perform two different actions:
Action | Description |
---|---|
LED turned ON | Switch is powered up |
LED turned OFF | Switch is not power up |
Ethernet port
There is one LEDs located at the top-left of each Ethernet port (top-right green port is unused).
They provide information on the current states of the Ethernet ports. Each port has one LED:
- Orange - 10/100 Mbps connection
Below is an explanation on the behaviours of orange LEDs.
State | Description |
---|---|
LED on | A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred). |
LED off | No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)). |
LED blinking | Connection established and data is being transferred over this port. |