Template:Rms manual management commands configuration: Difference between revisions

Latest revision as of 13:58, 26 March 2025

Device configuration

The Device configuration option allows you to modify configuration for your selected device(s).

To configure your devices go to the RMS web page, Left sidebar panel, (Management → Devices), click on , expand Configuration submenu, there you will find Device configuration.

The Device configuration function is used to change configuration of devices selected from your device table. You will get different configuration options depending on the device and its firmware version.

Devices you're trying to configure must be Online (⬤), otherwise, the Device configuration option will be grayed out.

Disclaimer

This tool is only available to use on devices with Firmware 07.03 and up.
Devices must be from the same device series.
Also, devices you're going to configure must be on the same version of the firmware: e.g. RUTX_R_00.07.03.2 and RUTX_R_00.07.03.2 can be while RUTX_R_00.07.03 RUTX_R_00.07.03.2 can not be configured simultaneously.

Step by step instructions

Navigate to Devices page under Management.
Select the device(s) that you wish to configure.
Open actions menu
Expand configuration submenu and click on Device configuration.
A configuration window will open, there configure the desired configuration sections and parameters.
Once done, click Save button.
A pop-up window will display configuration progress.

Important!

Allow some time for your device(s) to load new settings. It might take some time.

@@ Line 1: / Line 1: @@
-The '''Configure device''' option allows you to modify Mobile and LAN configuration for your selected device(s). To configure your devices go to the RMS web page, Left sidebar panel, (<b>Management → Overview</b>) and click on <b>Overview</b> submenu.
+==Device configuration==
+The '''Device configuration''' option allows you to modify configuration for your selected device(s).
-Scroll your mouse pointer to the Top control '''Configuration''' menu and select '''Configure device''' (Configuration → Configure device).
+To configure your devices go to the RMS web page, Left sidebar panel, (<b>Management → Devices</b>), click on [[File:Action button.png|border]], expand '''Configuration''' submenu, there you will find '''Device configuration'''.
-[[File:RMS-device-menu-left-sidebar-panel.jpg]] [[File:RMS-top-menu-configuration-mobile.jpg]]
+[[File:Rms devices sidebar.png|border]] [[File:Rms device configuration1.png|33%]]
-The '''Configuration''' function is used to set Mobile and LAN configuration of devices selected from your device table.
+The '''Device configuration''' function is used to change configuration of devices selected from your device table. You will get different configuration options depending on the device and its firmware version.
-===Configure mobile===
+Devices you're trying to configure must be '''Online''' (<span style="color:#499c6c">⬤</span>), otherwise, the '''Device configuration''' option will be grayed out.
-----
-<br>
+<big>'''<span style="color:#ff0000">Disclaimer</span>'''</big>
-[[File:RMS-configure-device-mobile.gif]]
+*This tool is only available to use on devices with Firmware [[FW & SDK Downloads|'''07.03''']] and up.
+*Devices must be from the same device series.
+*Also, devices you're going to configure must be on the same version of the firmware: e.g. RUTX_R_00.'''07.03.2''' and RUTX_R_00.'''07.03.2''' can be while RUTX_R_00.'''07.03''' RUTX_R_00.'''07.03.2''' can not be configured simultaneously.
-<br>
+===Step by step instructions===
-# Select the device(s) that you wish to configure.
+----
-# Move your mouse pointer to the '''Configuration''' menu and click '''Configure device'''.
-# You will get a pop-up box, where you will be able to choose whether you want to configure Mobile or LAN settings. For "Mobile" you can change general SIM card settings ("'''Mobile Configuration'''") and Force LTE settings ("'''Force LTE network'''");
-# You can find descriptions on the aforementioned settings by following these links:
-## '''[[RUT955_Mobile#General|Mobile Configuration]]'''
-# Fill out the information and click '''Save''' button when ready.
-# In the next window will display configuration progress.
-# After the configuration is complete in the Status column you will get a message: '''<span style="color:#6CAF8F">✔</span> Configuration have been successfully sent to device.'''
-'''<span style="color:#0455a4"><big>Important!</big></span>'''
-* Allow some time for your device(s) to load new settings. It might take up to 1 minute.
-* When the <span style="color:#BC5265">⬤</span> red circle ('''Offline''') will change to <span style="color:#6CAF8F">⬤</span> green circle ('''Online''') new settings are set and device(s) are fully operational.
-===Configure LAN===
+# Navigate to [[RMS Devices|Devices page]] under Management.
-----
 # Select the device(s) that you wish to configure.
-# Move your mouse pointer to the '''Configuration''' menu and click '''Configure device'''.
+# Open actions menu [[File:Action button.png|border]]
-# You will get a pop-up box, where you will be able to choose whether you want to configure Mobile or LAN settings. For "LAN" you can change general settings ("'''LAN Configuration'''") and DHCP server settings ("'''DHCP Server'''"):
+# Expand configuration submenu and click on '''Device configuration'''.
-# You can find descriptions on the aforementioned settings by following these links:
+# A configuration window will open, there configure the desired configuration sections and parameters.
-## '''[[RUT955_LAN#Configuration|LAN Configuration]]'''
+# Once done, click '''Save''' button.
-# Fill out the information and click '''Save''' button when ready.
+# A pop-up window will display configuration progress.
-# In the next window will display configuration progress.
-# After the configuration is complete in the Status column you will get a message: '''<span style="color:#6CAF8F">✔</span> Configuration have been successfully sent to device.'''
 '''<span style="color:#0455a4"><big>Important!</big></span>'''
-* Allow some time for your device(s) to load new settings. It might take up to 1 minute.
+* Allow some time for your device(s) to load new settings. It might take some time.
-* When the <span style="color:#BC5265">⬤</span> red circle ('''Offline''') will change to <span style="color:#6CAF8F">⬤</span> green circle ('''Online''') new settings are set and device(s) are fully operational.
-<br>
-[[File:RMS-LAN-configure-device.gif]]
 <br>