Jump to content
  • EN

Purple.ai Hotspot Configuration: Difference between revisions

From Teltonika Networks Wiki
← Older edit
VisualWikitext
No edit summary
 
(5 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==Summary==
==Summary==


This chapter is a guide on configuring purple.ai provider hotspot instance on RUT routers.
This chapter is a guide on configuring a purple.ai provider hotspot instance on RUT routers.


== Step1: purple.ai configuration ==
== Step 1: purple.ai configuration ==


===Registration===  
===Creating new customer===
If you already have created a desired customer, you can skip this step.


First, register at purple.ai by clicking on '''GET STARTED NOW''' or '''FREE SIGN UP'''
Log in with your credentials to the purpleportal.net/login system.
Go to Management → Customers.  


If you already have registered account skip to Login section
[[File:Purpleai1v1.png]]


[[File:1purpleai .jpg|1150px]]
Here, press '''Create new customer''' and then '''Add a single customer'''.


Fill in the registration form and click '''NEXT'''. In next window fill the required fields too and if all information is correct click '''LET’S GET STARTED'''.
[[File:Purpleaiadding1v1.png]]


[[File:2registration.jpg|1150px]]
Fill in the required information and press '''Save details'''


=== Portal Configuration ===
[[File:Purpleaiadding2v1.png]]


Link your social media accounts and move to step2.
===Adding a venue===


[[File:3portal1.jpg|1150px]]
After successful customer creation, we can add a venue to it.


Select with which social media accounts guests will connect to hotspot and move to step3.
To start, hover your mouse over the three dots of the desired customer and press '''add venue'''.


[[File:4portal2.jpg|1150px]]
[[File:Purpleaivenue1v1.png]]


Add your hardware.  
Select to use the '''standard configuration''' or use the '''setup wizard'''. This configuration example will be shown with the '''setup wizard'''.


In router type select '''RUT SERIES'''.
[[File:Purpleaivenue2v1.png]]


Fill '''Router Mac Address''', you can find it on router sticker by the WLAN MAC or connect to router and run command IFCONFIG mac address will be by the wlan.
Fill in the required information and press '''next'''.


[[File:5portal3.jpg|1150px]]
[[File:Purpleaivenue3v1.png]]


[[File:MacAddr.jpg|1150px]]
===Adding device===


Now registration process is finished, login credentials will be send to your email.
Now we will add a device to the venue.


===Login===
While still being in the venue configuration, press '''Yes, configure now.'''
[[File:Purpleaivenue4v1.png]]
Here, enter the device's '''MAC address''' and write the desired name for it.


Now that you have registered account, to manage your portal, login with your credentials into purpleportal.net/login system. To check if everything was configured properly during registration, go to Management → Locations → Venues and Groups and click pencil like button '''EDIT'''.
Make sure to download or open the instructions, as it contains required information for the hotspot configuration.
[[File:Purpleaivenue5v1.png]]


[[File:6managementloc.jpg|1150px]]
==Step 2: Router configuration ==
===Creating wireless access point===
----
If you have already set up your wireless access point - skip this step.


There you can add new or change your hardware and access methods for guests.
* Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
* Go to the '''Network → Wireless''' page.
* '''Click 'Add'''' to create a new Wireless Access Point.


[[File:7hardware.jpg|1150px]]
[[File:WiFi interfacesV2.png|border|center|class=tlt-border|1101x1101px]]


==Step2: Router configuration==
Edit your new Access Point as below:
 
<table class="nd-othertables_2">
===Login===
    <tr>
 
        <th width=440; style="border-bottom: 1px solid white;></th>
Now we need to open our '''RUT''' homepage. You can access the website by entering 192.168.1.1 in your internet browser's URL bar.
        <th width=800; style="border-bottom: 1px solid white;" rowspan=2>
[[File:Cobot WiFi interfaceV2.png|border|center|class=tlt-border|805x373px]]</th>
    </tr>
    <tr>
        <td style="border-bottom: 4px solid white>
# Check '''Enable''';
# Radios - Select desired radio;
# SSID - Your desired Extended Service Set Identifier name;
# Network - Choose '''--No network--'''.
        </td>
    </tr>
</table>


Navigate to '''Wireless Security''' tab and choose your
# Encryption - '''No encryption'''.
[[File:Cobot WiFi interface securityV2.png|border|center|class=tlt-border|799x799px]]
===Set up hotspot===
===Set up hotspot===
Open the hotspot configuration panel by clicking '''Services → Hotspot'''
----
 
Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press '''Add'''.
[[File:ServicesHotspot.jpg|1150px]]
 
Click '''Edit'''.
 
[[File:Edit1.jpg|1150px]]
 
Check '''enable'''
 
Select '''External radius''' from '''Authentication mode''' dropbox


Type configuration details: '''RADIUS Server'''
[[File:Add hotspotV2.png|border|center|class=tlt-border|1100x1100px]]


Radius secret key: '''6n8!5ETGb^nd'''
'''Hotspot configuration'''


UAM secret: '''uam175564uam'''
In the '''General tab,''' do the following steps:


Check '''External landing page'''
<table class="nd-othertables_2">
    <tr>
        <th width=450; style="border-bottom: 1px solid white;></th>
        <th width=790; style="border-bottom: 1px solid white;" rowspan=2>
[[File:Purplehotspotgeneralv2.png|border|center|class=tlt-border|827x445px]]</th>
    </tr>
    <tr>
        <td style="border-bottom: 4px solid white>
# Check '''Enable''';
# Authentication mode - '''Radius''';
# Landing page - '''External''';
# Landing page address - '''http://purplewifi.com/access/''';
# UAM port - '''3990''';
# UAM secret - '''from purple.ai instructions'''
        </td>
    </tr>
</table>


Type in '''Landing page address''': https://purpleportal.net/access/
----


[[File:8hotspot config.jpg|1150px]]
<table class="nd-othertables_2">
    <tr>
        <th width=450; style="border-bottom: 1px solid white;></th>
        <th width=790; style="border-bottom: 1px solid white;" rowspan=2>
[[File:Purpleairadiusv1.png]]</th>
    </tr>
    <tr>
        <td style="border-bottom: 4px solid white>
In the '''Radius''' tab, enter the Radius server configuration details from Purple.ai instructions:
        </td>
    </tr>
</table>


----
Under '''Walled Garden'''
Under '''Walled Garden'''


Click '''Add''' and configure with:
<table class="nd-othertables_2">
    <tr>
        <th width=450; style="border-bottom: 1px solid white;></th>
        <th width=790; style="border-bottom: 1px solid white;" rowspan=2>
[[File:Purplewalledv1.png|border|center|class=tlt-border|827x445px]]</th>
    </tr>
    <tr>
        <td style="border-bottom: 4px solid white>


Add these mandatory addresses:


purpleportal.net
purpleportal.net
Line 91: Line 142:
cloudfront.net
cloudfront.net


openweathermap.org
If you added social media access methods, then you need to add additional domains that can be found [https://support.purple.ai/hc/en-gb/articles/18545943203485-Walled-Garden-Domain-Whitelist?hw=teltonika here].
 
stripe.com
 
 
If you added social media access methods, then you need to add additional domains. Walled garden with facebook as social media access method should look like this.


[[File:9walledgarden.jpg]]
Click '''Save & Apply'''.
 
        </td>
Click '''Save'''
    </tr>
 
</table>
How to configure other social media access methods and additional information check userguide:
 
https://purpleportal.net/hardware/firmware/download/130/userguide


==Test your hotspot==
==Test your hotspot==
Line 126: Line 169:


https://purpleportal.net/hardware/firmware/download/130/userguide
https://purpleportal.net/hardware/firmware/download/130/userguide
[[Category:Third party services]]

Latest revision as of 13:27, 15 May 2025

Main Page > General Information > Configuration Examples > Third party services > Purple.ai Hotspot Configuration

Summary

This chapter is a guide on configuring a purple.ai provider hotspot instance on RUT routers.

Step 1: purple.ai configuration

Creating new customer

If you already have created a desired customer, you can skip this step.

Log in with your credentials to the purpleportal.net/login system. Go to Management → Customers.

Here, press Create new customer and then Add a single customer.

Fill in the required information and press Save details

Adding a venue

After successful customer creation, we can add a venue to it.

To start, hover your mouse over the three dots of the desired customer and press add venue.

Select to use the standard configuration or use the setup wizard. This configuration example will be shown with the setup wizard.

Fill in the required information and press next.

Adding device

Now we will add a device to the venue.

While still being in the venue configuration, press Yes, configure now. Here, enter the device's MAC address and write the desired name for it.

Make sure to download or open the instructions, as it contains required information for the hotspot configuration.

Step 2: Router configuration

Creating wireless access point

If you have already set up your wireless access point - skip this step.

  • Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
  • Go to the Network → Wireless page.
  • Click 'Add' to create a new Wireless Access Point.

Edit your new Access Point as below:

  1. Check Enable;
  2. Radios - Select desired radio;
  3. SSID - Your desired Extended Service Set Identifier name;
  4. Network - Choose --No network--.

Navigate to Wireless Security tab and choose your

  1. Encryption - No encryption.

Set up hotspot

Navigate to Services → Hotspot and add a new Hotspot Instance. To do so, find the Add New Instance section and select your Wireless AP in the interface list, then press Add.

Hotspot configuration

In the General tab, do the following steps:

  1. Check Enable;
  2. Authentication mode - Radius;
  3. Landing page - External;
  4. Landing page address - http://purplewifi.com/access/;
  5. UAM port - 3990;
  6. UAM secret - from purple.ai instructions

In the Radius tab, enter the Radius server configuration details from Purple.ai instructions:

Under Walled Garden

Add these mandatory addresses:

purpleportal.net

venuewifi.com

cloudfront.net

If you added social media access methods, then you need to add additional domains that can be found here.

Click Save & Apply.

Test your hotspot

Try connecting to your router using computer or mobile phone.

Select your configured wifi network.

Connect to network by filling purple.ai form or if configured with social media account


External links

https://purple.ai/

https://purpleportal.net

https://purpleportal.net/hardware/firmware/download/130/userguide

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Purple.ai_Hotspot_Configuration&oldid=149200"