RUT300 Firmware Downloads: Difference between revisions

(2 intermediate revisions by the same user not shown)

Line 7:

==Changelog==

===[https://firmware.teltonika-networks.com/7.14.3/RUT30X/RUT30X_R_00.07.14.3_WEBUI.bin RUT30X_R_00.07.14.3] | 2025.05.26===

* Fix

** Services

*** L2TP: fixed a connection problem when using an L2TP over IPsec configuration

** System

*** Custom Scripts: fixed execution of custom scripts after upgrade

----

===[https://firmware.teltonika-networks.com/7.14.2/RUT30X/RUT30X_R_00.07.14.2_WEBUI.bin RUT30X_R_00.07.14.2] | 2025.05.09===

Note: If a system upgrade with keep settings is performed from R_00.07.14 or R_00.07.14.1 to this version, follow the instructions described under those firmware versions below to resolve Data Limit and traffic monitoring issues.

----

* Fix

** Network

Line 18:

Line 28:

Note: This firmware version has been withdrawn due to a critical issue affecting the Data Limit, traffic monitoring functionalities.

Note: If a system upgrade with keep settings was already performed from R_00.07.14 to this version, Data Limit and traffic monitoring ~~issues~~ cannot be ~~resolved manually~~. ~~A firmware upgrade without~~ keep ~~settings is required~~.

Note: If a system upgrade with keep settings was already performed from R_00.07.14 to this version, previous Data Limit tracking and traffic monitoring information cannot be restored. However, to keep current traffic monitoring history after next update, the command found in the Note below must be executed in CLI.

Note: If a system upgrade with keep settings is performed from this firmware version to newer and R_00.07.14 was never used, following command must be executed in CLI before upgrade to resolve Data Limit and traffic monitoring issues.

@@ Line 7: / Line 7: @@
 ==Changelog==
 <!--NEW_FW-->
+===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.14.3/RUT30X/RUT30X_R_00.07.14.3_WEBUI.bin RUT30X_R_00.07.14.3]</span></b> | 2025.05.26===
+* <b>Fix</b>
+** <b>Services</b>
+*** L2TP: fixed a connection problem when using an L2TP over IPsec configuration
+** <b>System</b>
+*** Custom Scripts: fixed execution of custom scripts after upgrade
+----
 ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.14.2/RUT30X/RUT30X_R_00.07.14.2_WEBUI.bin RUT30X_R_00.07.14.2]</span></b> | 2025.05.09===
+<b>Note:</b> If a system upgrade with keep settings is performed from <b>R_00.07.14</b> or <b>R_00.07.14.1</b> to this version, follow the instructions described under those firmware versions below to resolve Data Limit and traffic monitoring issues.
+----
 * <b>Fix</b>
 ** <b>Network</b>
@@ Line 18: / Line 28: @@
 <b>Note:</b> This firmware version has been withdrawn due to a critical issue affecting the Data Limit, traffic monitoring functionalities.
-<b>Note:</b> If a system upgrade with keep settings was already performed from <b>R_00.07.14</b> to this version, Data Limit and traffic monitoring issues cannot be resolved manually. A firmware upgrade without keep settings is required.
+<b>Note:</b> If a system upgrade with keep settings was already performed from <b>R_00.07.14</b> to this version, previous Data Limit tracking and traffic monitoring information cannot be restored. However, to keep current traffic monitoring history after next update, the command found in the <b>Note</b> below must be executed in CLI.
 <b>Note:</b> If a system upgrade with keep settings is performed from this firmware version to newer and <b>R_00.07.14</b> was never used, following command must be executed in CLI <b>before</b> upgrade to resolve Data Limit and traffic monitoring issues.