As you can see most of the values are '''0''' and '''1''', 0 meaning OFF and 1 meaning ON. For example, if you want to turn '''Wi-Fi OFF''', this command should be used:
+
As you can see most of the values are '''0''' and '''1''', 0 meaning OFF and 1 meaning ON. For example, if you want to turn '''WiFi OFF''', this command should be used:
$ modbus write -w -p 12345 192.168.1.1 %MW210 0
$ modbus write -w -p 12345 192.168.1.1 %MW210 0
−
If you want to turn '''Wi-Fi ON''', use this command instead:
+
If you want to turn '''WiFi ON''', use this command instead: