SMS Utilities: Difference between revisions

From Teltonika Networks Wiki
(Redirected page to SMS Commands)
Tag: New redirect
(13 intermediate revisions by 6 users not shown)
Line 1: Line 1:
#REDIRECT [[SMS Commands]]
==Summary==


{{Template: Networking_device_manual_mutual_page
RUT routers have an extensive amount of various SMS control utilities. SMS Utilities can be used to set/get configurations, monitor and issue commands to the router.
| page = Mobile Utilities
 
}}
==SMS Utilities==
<ul>
 
    <li><b>RUT routers</b>
===Execution===
        <ul>
----
            <li>[[RUT230 SMS Utilities]]</li>
To execute a rule, just send an SMS message to the router‘s SIM card number with the rule's SMS Text, e.g., if you send a message with the text '''“reboot”''', the router will reboot provided the selected Authorization method is '''“No authorization”'''. However, if there is an Authorization method present you will need to include the '''“Authorization key”''' in the text message. This '''“Authorization key”''' depends on  the chosen '''Authorization method''', i.e., if the method is '''“By serial”''', the '''“Authorization key”''' is the router’s serial number, if the method is '''“By router admin password”''', the '''“Authorization key”''' is the router’s admin password. The '''"Authorization key”''' must precede the activation text and they must be separated by a space symbol. For example, if the chosen Authorization method is '''“By router admin password”''' and the password is '''“admin01”''', the entire message should look like this: '''“admin01 reboot”'''. The same applies to '''“By serial”''' authorization.
            <li>[[RUT240 SMS Utilities]]</li>
 
            <li>[[RUT850 SMS Utilities]]</li>
Here are a few examples of how certain rules can be executed with various Authorization methods:
            <li>[[RUT900 SMS Utilities]]</li>
            <li>[[RUT950 SMS Utilities]]</li>
{| class="wikitable"
            <li>[[RUT955 SMS Utilities]]</li>
|+
        </ul>
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | COMMAND
    </li>
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | AUTHORIZATIO METHOD
    <li><b>RUTX routers</b>
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | SMS TEXT
        <ul>
|-
            <li>[[RUTX09 Mobile Utilities]]</li>
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Status
            <li>[[RUTX11 Mobile Utilities]]</li>
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | By router admin password
            <li>[[RUTX12 Mobile Utilities]]</li>
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | ROUTER_PASSWORD status
            <li>[[RUTXR1 Mobile Utilities]]</li>
|-
        </ul>
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Reboot
    </li>
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | By serial
    <li><b>TRB gateways</b>
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SERIAL_NUMBER reboot
        <ul>
|-
            <li>[[TRB140 Mobile Utilities]]</li>
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Switch mobile data off
            <li>[[TRB141 Mobile Utilities]]</li>
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | No authorization
            <li>[[TRB142 Mobile Utilities]]</li>
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | mobileoff
            <li>[[TRB145 Mobile Utilities]]</li>
|-
            <li>[[TRB245 Mobile Utilities]]</li>
|}
            <li>[[TRB255 Mobile Utilities]]</li>
 
        </ul>
===Default Rules===
    </li>
 
</ul>
The SMS Utilities section contains a list of rules that perform certain actions when they are activated by SMS messages.
 
[[Image:Services sms utils.PNG]]
 
The figure above is an illustration of the SMS Utilities rules list. The entire list contains 26 rules but you are also be provided with the possibility to configure custom ones.
 
All default configuration options are listed below:
*Reboot
*Get status
*Get I/O status
*Get OpenVPN status
*Switch WiFi on / off
*Switch mobile data on / off
*Switch OpenVPN on / off
*Change mobile data settings
*Get list of profiles
*Change profile
*SSH access control
*Web access control
*Restore to default
*Force SIM switch
*GPS coordinates
*GPS on / off
*FW upgrade from server
*Config update from server
*Switch monitoring on / off
*Monitoring status
*UCI API
 
===Rule Overview and editing===
----
Every default SMS rule can be edited to your liking. If none of the rules suit your purposes, just click the '''Edit''' button next to any SMS Utilities rules. This section will contain information on editing every signle SMS Utilities rule.
 
====Reboot====
----
[[Image:Services sms utils reboot.PNG]]
 
Above is an example of what an '''SMS Configuration''' window looks like, specifically, '''SMS Configuration''' for the '''Reboot''' rule. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean. To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable SMS reboot function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows router restart via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Reboots the router
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''reboot'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Get status via SMS after reboot
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Check this to receive connection status via SMS after the reboot
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If checked, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule. After checking this, the '''Send status SMS to other number''' field will become available
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Send status SMS to other number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable this if you want the status message to be sent to another (other than the sender) number (s)
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, you will be prompted to enter a phone number (s)
This field appears only if you have checked '''Get status via SMS after reboot'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Message text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which status information should be included in SMS:
Data state, Operator, Connection type, Signal Strength, Connection State, IP
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | You can select which status elements to display
|-
|}
 
====Status====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable SMS status function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the '''Message text''' field
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''status'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Send status SMS to other number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable this if you want the status message to be sent to another (other than the sender) number (s)
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, you will be prompted to enter a phone number (s)
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Message text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which status information should be included in SMS:
Data state, Operator, Connection type, Signal Strength, Connection State, IP
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | You can select which status elements to display
|-
|}
 
====Get I/O status====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable SMS I/O status function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to get the router‘s I/O status via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the '''Message text''' field
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''iostatus'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Send status SMS to other number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable this if you want a status message to be sent to another (other than the sender) number (s)
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, you will be prompted to enter a phone number (s)
|-
|}
 
====Get OpenVPN status====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable  the OpenVPN status function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows to get the router‘s OpenVPN status via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the '''Message text''' field
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''vpnstatus'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Send status SMS to other number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable this if you want a status message to be sent to another (other than the sender) number (s)
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, you will be prompted to enter a phone number (s)
|-
|}
 
====Switch WiFi On/Off====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Switch WiFi function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows Wi-Fi control via SMS.
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the '''Message text''' field
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter;
Default text: '''wifion''' to turn WiFi ON; '''wifioff''' to turn WiFi OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Write to config
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Permanently saves Wi-Fi state
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | With this setting enabled, the router will keep the new Wi-Fi state even after reboot.
If it is not selected, the router will revert the Wi-Fi state after reboot
|-
|}
 
====Switch mobile data ON/OFF====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Switch mobile data function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows mobile control via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turn mobile data ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter;
Default text: '''mobileon''' to turn mobile data ON; '''mobileoff''' to turn mobile data OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Write to config
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Permanently saves mobile network state
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | With this setting enabled, the router will keep the new mobile data state even after reboot.
If it is not selected, the router will revert the mobile data state after reboot
|-
|}
 
====Manage OpenVPN====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Manage OpenVPN function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows OpenVPN control via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns an OpenVPN instance ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default: '''vpnon''' to turn OpenVPN ON; '''vpnoff''' to turn OpenVPN OFF
 
'''After the SMS text you have to write OpenVPN instance‘s name, e.g., "vpnon client_Client1"'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
====Get list of profiles====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Get list of profiles function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to get the list of profiles via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sends you the list of existing profiles
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''profdisp'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
====Change profile====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Change profile function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows changing profiles via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Changes the current profile to the one specified in the message
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |  SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text '''pr'''
 
'''After the SMS text you have to write the Profile's name, e.g., "pr John"'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
====SSH access Control====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the SSH access control function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows SSH access control via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns SSH access ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''ssh'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable SSH access
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables or Disables SSH access from LAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable remote SSH access
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables or Disables SSH access from WAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN
|-
|}
----
* Note that by default the ssh rule will '''enable both local and remote SSH access'''. You can change how the rule acts by clicking the "Edit" button located next to it:
 
[[File:Sms utilities ssh edit v2.png]]
----
* In the next window you can customize whether the rule will turn local/remote SSH access ON or OFF:
 
[[File:Sms utilities ssh configuration v2.png]]
----
If you are using this rule frequently, we suggest that you create a new custom rule. For example, you can use the default rule to turn SSH access ON and use the custom rule to turn SSH access OFF. You can create new SMS Utilities rules from the '''New SMS Rule''' section located at the bottom of the SMS Utilities page.
 
====Web access Control====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Web access control function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows Web access control via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns access to WebUI ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''web'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable HTTP access
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables or Disables HTTP access from LAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable remote HTTP access
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables or Disables HTTP access from WAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable remote HTTPS access
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables or Disables HTTPs access from WAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN
|-
|}
----
* Note that by default the web rule will '''enable both local and remote HTTP access''' as well as '''remote HTTPS access'''. You can change how the rule acts by clicking the "Edit" button located next to it:
 
[[File:Sms utilities web edit v2.png]]
----
* In the next window you can customize whether the rule will turn local/remote HTTP/HTTPS access ON or OFF:
 
[[File:Sms utilities web configuration v2.png]]
----
If you are using this rule frequently, we suggest that you create a new custom rule. For example, you can use the default rule to turn HTTP/HTTPS access ON and use the custom rule to turn HTTP/HTTPS access OFF. You can create new SMS Utilities rules from the '''New SMS Rule''' section located at the bottom of the SMS Utilities page.
 
====Restore to default====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Restore to default function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to restore the router to its default settings via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Executes a router Reset, which means the router will reboot after this rule is executed and all custom configurations will be deleted and restored to default
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''restore'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
====Force SIM switch====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Force SIM switch function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows SIM switch via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Forces the router to switch to the other SIM card(the one that is not in use at the moment of receiving the message)
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''switch_sim'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
====GPS Coordinates====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the GPS coordinates function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to get GPS coordinates via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sends you GPS coordinates of the router
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''gps'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
====GPS ON/OFF====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the GPS ON/OFF function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to control GPS via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns GPS ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''gpson''' to turn GPS ON; '''gpsoff''' to turn GPS OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
====Force FW upgrade from server====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the FW upgrade from server function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to upgrade the router‘s FW via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Upgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''fw_upgrade'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
====Force Config update from server====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Config update from server function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to load a different configuration file on to your router via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Upgrades your router's current Configuration to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''config_update'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
====Switch monitoring ON/OFF====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Switch monitoring function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to control monitoring status via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns remote monitoring ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''monitoringon''' to turn remote monitoring ON; '''monitoringoff''' to turn remote monitoring OFF;
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
====Monitoring status====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Monitoring status function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to get monitoring status via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns a text message containing information about remote monitoring status
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''monitoring_status'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
====Switch output ON/OFF====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Switch output function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows output control via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns specified output ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Active timeout
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Make the rule active for a specific time;
format: '''seconds'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''Example:''' if you configure a rule to turn a specific output on and set a 30 s timeout, the output will activate once the router receives the SMS messages and then it will deactivate after a period of 30 s
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: " "
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Output type
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which output will be activated
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
Digital OC output {{!}} Relay output; Default: '''Digital OC output'''
|-
|}
 
'''NOTE:''' No default '''SMS text''' is provided for this rule. It can be created via the '''New SMS Rule''' tab.
 
===Change mobile data settings (cellular) rule===
----
The Change mobile data settings rule is exceptional to most of the other rules as it does not perform a single action like turning specific services On/Off or getting status updates. It designed to change mobile data settings and it's '''SMS text''' can't be described by a single string because the message depends on what configurations you want to change. For example, you can send a message that will change your APN only, you can send a message that will change APN and mobile service mode, or even a message that will change every single mobile setting.
 
{| class="wikitable"
|+ style="text-align: left;" | Change mobile data settings
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Change mobile data settings function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to change mobile settings via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Changes the specified mobile settings
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default: '''cellular'''
 
'''Detailed explanations on how to use this function are presented in the table below'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
The default '''SMS text''' for the Change mobile data settings rule is '''cellular''' but it is only an indication text and does not include any specific parameters to be changed. The list of parameters that can be changed and explanations on how to incorporate them into the '''"cellular"''' message is presented in the table below.
 
{| class="wikitable"
|+ style="text-align: left;" | Mobile Settings via SMS parameters
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | PARAMETER
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | VALUE
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DEFAULT MESSAGE EXAMPLE
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | apn=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | e.g., internet.gprs
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets APN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular apn=internet.gprs'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | dialnumber=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | e.g., *99***1#
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets Dialing number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular dialnumber=*99***1#'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | auth_mode=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | none {{!}} pap {{!}} chap
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets Authentication method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular auth_method=pap'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | service=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | 2gonly {{!}} 3gonly {{!}} 4gonly {{!}} auto
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets the mobile Service mode
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular service=auto'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | username=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | e.g., user
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets the user name for PAP or CHAP authentication
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular username=user'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | password=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | e.g., pass
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets the password for PAP or CHAP authentication
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular password=pass'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | roaming=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''0''' for OFF; '''1''' for ON
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turn Mobile data roaming ON or OFF
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular roaming=0'''
|-
|}
 
Each of the above examples contain a single parameter but you can send out multiple parameters in one message. For example, '''"cellular apn=internet.gprs service=3gonly"'''. This message would set your APN to "internet.gprs" and your Service mode to 3G Only. You can also send a message that would include all of the parameters above: '''"cellular apn=internet.gprs dialnumber=*99***1# auth_mode=pap service=3gonly username=user password=pass"'''
 
===UCI API rule===
----
The UCI rule lets you set or get any parameter from the router's configuration files.
 
{| class="wikitable"
|+ style="text-align: left;" | UCI API
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the UCI API function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to set or get any configurations from the router
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets or sends you any specified configurations of the router
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''uci'''
 
'''Detailed explanations on how to use this function are presented in the table below'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization {{!}} By serial {{!}} By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
|-
|}
 
The following are syntax examples for the UCI API rule:
 
{| class="wikitable"
|+ style="text-align: left;" | UCI API syntax
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | SYNTAX
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DEFAULT MESSAGE EXAMPLE
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | uci get config.section.option"
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns config option value
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''uci get network.wan.ipaddr''' - returns the router's WAN IP address
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | uci set config.section.option="value"
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets config option
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''uci set wireless.wifi-iface.key="12345678"''' - sets WiFi interface's password to 12345678
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | uci show config
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns the contents of a config file
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''uci show openvpn''' - returns the contents of the openvpn config file
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | uci show config.section
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns the exact part of a config file (either section or the exact option value)
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''uci show network.ppp''' - returns the contents of the ppp interface section from the network config file
|-
|}
 
As you can see, the UCI rule requires that you know the names of the configuration files and the names of the sections and parameters that they hold. You can find the config file list and some examples of UCI usage in general in our '''[[UCI command usage]]''' article.
 
===Custom Rules===
----
If default rules do not suit your purposes, you can also configure custom SMS rules. To do so, go to the bottom of the SMS Utilities page, where you will find the '''New SMS Rule''' tab. Select an Action and press the '''Add''' button located next to it.
 
[[Image:Services sms utils new.PNG]]
 
Configuring a new rule is very similar to editing default rules: you are provided with a list of '''Actions''', other fields are generated in accordance with which '''Action''' you choose.
 
==Call Utilities==
 
Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.
 
There is only one default rule (Reboot) configured and it is disabled. To make a new rule click the '''Edit''' button located next to the one default rule or make an entirely new entry for you Call Rules list by adding a rule from the New Call Rule tab.
 
===Call Configuration===
----
The '''Call Configuration''' window is similar to '''SMS Configuration''', but less complex.
 
[[Image:Services sms utils call.PNG]]
 
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes {{!}} no; Default: '''no'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows router's Call rules
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Reboot {{!}} Send status {{!}} Send WiFi {{!}} Send mobile data {{!}} Send output; Default: '''Reboot'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Get status via SMS after reboot
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes {{!}} no; Default: '''no'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If checked, the router will send a status message once it has rebooted and is operational again
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Message text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: '''Router name - %rn; WAN IP - %wi; Data Connection state - %cs; Connection type - %ct; Signal Strenght - %ss; New FW available - %fs;'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which status information should be included in SMS:
Data state, Operator, Connection type, Signal Strength, Connection State, IP
|-
|}
 
==User Groups==
 
'''User Groups''' provides you with the possibility to group phone numbers for SMS management purposes. You can then later use these groups in all related SMS and call functionalities. This option helps if there are several Users who should have the same roles when managing the router via SMS or calls. You can create a new user group by entering a name in the '''Group name''' text field and clicking the '''Add''' button located next to it in the '''Create New User Group''' section. After this you will re redirected get to the '''Modify User Group''' section.
 
[[Image:Services sms utils user groups.PNG]]
 
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Group name
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Name of the group of phone numbers. Used for easier management purposes
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Phone number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | phone number; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Add numbers to the user group. Must match international format. You can add more phone number fields by clicking on the green ([[Image:Services sms gateway auto reply plus symbol.PNG]]) symbol
|-
|}
 
==SMS Management==
 
With the help of the '''SMS Management''' window you can read and send SMS messages.
 
===Read SMS===
----
In the '''Read SMS''' tab you can read and delete received/stored SMS messages. The layout is simple, there is a list of received SMS messages and you can choose how many entries of that list should visible at one time with SMS per page drop box in the top left corner of the page and there is a Search field to help you navigate more efficiently through the list of messages in the top right corner of the page.
 
[[Image:Services sms utils read.PNG]]
 
===Send SMS===
----
The Send SMS tab lets you send SMS messages from the router‘s SIM card.
 
[[Image:Services sms utils send.PNG]]
 
All you have to do is enter the recipient’s phone number, type in your message and hit the '''Send''' button. If everything went well, a green bar saying  '''Message sent''' should appear (image below).
 
[[Image:Services sms utils sent.PNG]]
 
===Storage===
----
The Storage tab shows you how much SIM card memory space is used and how much is still available. You can also chose the option for the router to not delete messages. If this option is not used, the router will automatically delete all incoming messages after they have been read. Message status '''read/unread''' is examined every 60 seconds. All '''read''' messages are deleted.
 
[[Image:Services sms utils store.PNG]]
 
==Remote Configuration==
 
RUT routers can be configured via SMS from another RUT router. You only have to select which configuration details have to be sent and type in the phone number of the other router. The router will then generate the SMS Text needed for the configurations to be applied.
Total count of SMS is managed automatically. '''You should be aware of the possible number of SMS and use this feature at your own responsibility'''. Generally, it should not be used if you have a high cost per SMS. This is especially relevant if you will try to send a whole OpenVPN configuration, which might accumulate to about 40 SMS messages.
 
===Receive Configuration===
----
This section controls how the configuration initiation party should identify itself.
 
[[Image:Services sms utils receive.PNG]]
 
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | VALUE
! style="width: 579px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Name of the group of phone numbers. Used for easier management purposes
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | No authorization {{!}} By serial {{!}} By router admin password; Default: '''No authorization'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization will be used to authenticate remote configurations
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | From all numbers {{!}} From group {{!}} From single number; Default: '''From all numbers'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users that can send remote configurations to the router
|-
|}
 
===Send Configuration===
----
This section lets you configure remote RUTxxx devices via SMS. The authorization settings must match those that are set on the receiving party. An example of how sending a new network configuration with both WAN and LAN settings is presented below.
 
[[Image:Services sms utils send config.PNG]]
 
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | VALUE
! style="width: 579px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Generate SMS
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | New {{!}} From current configuration; Default: '''New'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Select whether the configuration will be newly generated or the router's current configuration
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | WAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes {{!}} no; Default: '''no'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Select whether to send WAN (Wide Area Network) configurations
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Interface
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Wired {{!}} Mobile; Default: '''Mobile'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which interface type will be used for WAN connection on the remote device
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Primary SIM card
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SIM1 {{!}} SIM2; Default: '''SIM1'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which SIM card will be used as Primary on the remote device
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Mobile connection
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Use PPP mode {{!}} Use NDIS mode {{!}} Use NCM mode {{!}} Use QMI mode {{!}} Use QMI mode used for Quectel EC25-E modem; Default: '''Use PPP mode'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which mobile connection type will be used on the remote device; select according to the remote device's modem:
'''NDIS''' for Huawei modems
 
'''NCM''' for Telit modems
 
'''QMI''' for Quectel modems
 
'''PPP''' for any modem
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | APN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | APN that will be used on the remote device. APN is the name of a gateway between a GPRS or 3G mobile networks and another computer network, frequently the public Internet. APN is provided by your Internet Service Provider (ISP)
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Dialing number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Dialing number that will be used on the remote device. A Dialling number is used to establish a mobile PPP connection
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authentication method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | CHAP {{!}} PAP {{!} None; Default: '''None'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Mobile authentication method that will be used on the remote device. Mobile Authentication methods are used to authenticate new connections on your GSM carrier's network
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | User name
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | User name used for new connection authentication with CHAP or PAP authentication methods. This field only becomes visible when you select CHAP or PAP authentication methods.
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Password
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Password used for new connection authentication with CHAP or PAP authentication methods. This field only becomes visible when you select CHAP or PAP authentication methods.
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Service mode
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | 2G Only {{!}} 2G preferred {{!}} 3G Only {{!}} 3G preferred {{!}} 4G (LTE) Only {{!}} 4G (LTE) preferred {{!}} Automatic; Default: '''3G preferred'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Mobile service mode that will be used on the remote device
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | LAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes {{!}} no; Default: '''no'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | LAN IP address that will be used on the remote device
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | IP address
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | ip; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | LAN IP address that will be used on the remote device
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | IP netmask
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | ip; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | A subnet mask that the remote router will use to define how large the LAN network is
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | IP broadcast
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | ip; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | A logical address at which all devices connected to a multiple-access communications network are enabled to receive datagrams
|-
|}
 
This is an example of only one scenario but you can also send different Network and VPN settings. The settings being sent are the same as they would be configured on your router locally, therefore, you can find information on what different Network and VPN parameters do in [[LAN]], [[WAN]], [[Mobile]] and [[VPN]] pages of this wiki.
 
==Statistics==
 
The Statistics page represents information about sent and received SMS messages of both SIM cards. The counters can be reset by clicking the '''Reset''' button next to each SIM card.
 
[[Image:Services sms utils statistics.PNG]]

Revision as of 10:44, 26 October 2018

Summary

RUT routers have an extensive amount of various SMS control utilities. SMS Utilities can be used to set/get configurations, monitor and issue commands to the router.

SMS Utilities

Execution


To execute a rule, just send an SMS message to the router‘s SIM card number with the rule's SMS Text, e.g., if you send a message with the text “reboot”, the router will reboot provided the selected Authorization method is “No authorization”. However, if there is an Authorization method present you will need to include the “Authorization key” in the text message. This “Authorization key” depends on the chosen Authorization method, i.e., if the method is “By serial”, the “Authorization key” is the router’s serial number, if the method is “By router admin password”, the “Authorization key” is the router’s admin password. The "Authorization key” must precede the activation text and they must be separated by a space symbol. For example, if the chosen Authorization method is “By router admin password” and the password is “admin01”, the entire message should look like this: “admin01 reboot”. The same applies to “By serial” authorization.

Here are a few examples of how certain rules can be executed with various Authorization methods:

COMMAND AUTHORIZATIO METHOD SMS TEXT
Status By router admin password ROUTER_PASSWORD status
Reboot By serial SERIAL_NUMBER reboot
Switch mobile data off No authorization mobileoff

Default Rules

The SMS Utilities section contains a list of rules that perform certain actions when they are activated by SMS messages.

The figure above is an illustration of the SMS Utilities rules list. The entire list contains 26 rules but you are also be provided with the possibility to configure custom ones.

All default configuration options are listed below:

  • Reboot
  • Get status
  • Get I/O status
  • Get OpenVPN status
  • Switch WiFi on / off
  • Switch mobile data on / off
  • Switch OpenVPN on / off
  • Change mobile data settings
  • Get list of profiles
  • Change profile
  • SSH access control
  • Web access control
  • Restore to default
  • Force SIM switch
  • GPS coordinates
  • GPS on / off
  • FW upgrade from server
  • Config update from server
  • Switch monitoring on / off
  • Monitoring status
  • UCI API

Rule Overview and editing


Every default SMS rule can be edited to your liking. If none of the rules suit your purposes, just click the Edit button next to any SMS Utilities rules. This section will contain information on editing every signle SMS Utilities rule.

Reboot


Above is an example of what an SMS Configuration window looks like, specifically, SMS Configuration for the Reboot rule. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean. To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable SMS reboot function Allows router restart via SMS
Action The action to be performed when this rule is met Reboots the router
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: reboot
Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Get status via SMS after reboot Check this to receive connection status via SMS after the reboot If checked, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule. After checking this, the Send status SMS to other number field will become available
Send status SMS to other number Enable this if you want the status message to be sent to another (other than the sender) number (s) If this is checked, you will be prompted to enter a phone number (s)

This field appears only if you have checked Get status via SMS after reboot

Message text Which status information should be included in SMS:

Data state, Operator, Connection type, Signal Strength, Connection State, IP

You can select which status elements to display

Status


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable SMS status function Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule
Action The action to be performed when this rule is met Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the Message text field
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: status
Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Send status SMS to other number Enable this if you want the status message to be sent to another (other than the sender) number (s) If this is checked, you will be prompted to enter a phone number (s)
Message text Which status information should be included in SMS:

Data state, Operator, Connection type, Signal Strength, Connection State, IP

You can select which status elements to display

Get I/O status


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable SMS I/O status function Allows you to get the router‘s I/O status via SMS
Action The action to be performed when this rule is met Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the Message text field
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: iostatus
Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Send status SMS to other number Enable this if you want a status message to be sent to another (other than the sender) number (s) If this is checked, you will be prompted to enter a phone number (s)

Get OpenVPN status


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the OpenVPN status function Allows to get the router‘s OpenVPN status via SMS
Action The action to be performed when this rule is met Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the Message text field
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: vpnstatus
Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Send status SMS to other number Enable this if you want a status message to be sent to another (other than the sender) number (s) If this is checked, you will be prompted to enter a phone number (s)

Switch WiFi On/Off


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Switch WiFi function Allows Wi-Fi control via SMS.
Action The action to be performed when this rule is met Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the Message text field
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter;

Default text: wifion to turn WiFi ON; wifioff to turn WiFi OFF

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Write to config Permanently saves Wi-Fi state With this setting enabled, the router will keep the new Wi-Fi state even after reboot.

If it is not selected, the router will revert the Wi-Fi state after reboot

Switch mobile data ON/OFF


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Switch mobile data function Allows mobile control via SMS
Action The action to be performed when this rule is met Turn mobile data ON or OFF
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter;

Default text: mobileon to turn mobile data ON; mobileoff to turn mobile data OFF

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Write to config Permanently saves mobile network state With this setting enabled, the router will keep the new mobile data state even after reboot.

If it is not selected, the router will revert the mobile data state after reboot

Manage OpenVPN


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Manage OpenVPN function Allows OpenVPN control via SMS
Action The action to be performed when this rule is met Turns an OpenVPN instance ON or OFF
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default: vpnon to turn OpenVPN ON; vpnoff to turn OpenVPN OFF

After the SMS text you have to write OpenVPN instance‘s name, e.g., "vpnon client_Client1"

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Get list of profiles


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Get list of profiles function Allows you to get the list of profiles via SMS
Action The action to be performed when this rule is met. Sends you the list of existing profiles
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: profdisp

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Change profile


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Change profile function Allows changing profiles via SMS
Action The action to be performed when this rule is met. Changes the current profile to the one specified in the message
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text pr

After the SMS text you have to write the Profile's name, e.g., "pr John"

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

SSH access Control


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the SSH access control function Allows SSH access control via SMS
Action The action to be performed when this rule is met. Turns SSH access ON or OFF
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: ssh

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Enable SSH access Enables or Disables SSH access from LAN If this is checked, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN
Enable remote SSH access Enables or Disables SSH access from WAN If this is checked, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN

  • Note that by default the ssh rule will enable both local and remote SSH access. You can change how the rule acts by clicking the "Edit" button located next to it:


  • In the next window you can customize whether the rule will turn local/remote SSH access ON or OFF:


If you are using this rule frequently, we suggest that you create a new custom rule. For example, you can use the default rule to turn SSH access ON and use the custom rule to turn SSH access OFF. You can create new SMS Utilities rules from the New SMS Rule section located at the bottom of the SMS Utilities page.

Web access Control


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Web access control function Allows Web access control via SMS
Action The action to be performed when this rule is met. Turns access to WebUI ON or OFF
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: web

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Enable HTTP access Enables or Disables HTTP access from LAN If this is checked, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN
Enable remote HTTP access Enables or Disables HTTP access from WAN If this is checked, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN
Enable remote HTTPS access Enables or Disables HTTPs access from WAN If this is checked, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN

  • Note that by default the web rule will enable both local and remote HTTP access as well as remote HTTPS access. You can change how the rule acts by clicking the "Edit" button located next to it:


  • In the next window you can customize whether the rule will turn local/remote HTTP/HTTPS access ON or OFF:


If you are using this rule frequently, we suggest that you create a new custom rule. For example, you can use the default rule to turn HTTP/HTTPS access ON and use the custom rule to turn HTTP/HTTPS access OFF. You can create new SMS Utilities rules from the New SMS Rule section located at the bottom of the SMS Utilities page.

Restore to default


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Restore to default function Allows you to restore the router to its default settings via SMS
Action The action to be performed when this rule is met. Executes a router Reset, which means the router will reboot after this rule is executed and all custom configurations will be deleted and restored to default
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: restore

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Force SIM switch


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Force SIM switch function Allows SIM switch via SMS
Action The action to be performed when this rule is met. Forces the router to switch to the other SIM card(the one that is not in use at the moment of receiving the message)
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: switch_sim

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

GPS Coordinates


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the GPS coordinates function Allows you to get GPS coordinates via SMS
Action The action to be performed when this rule is met. Sends you GPS coordinates of the router
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: gps

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

GPS ON/OFF


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the GPS ON/OFF function Allows you to control GPS via SMS
Action The action to be performed when this rule is met. Turns GPS ON or OFF
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: gpson to turn GPS ON; gpsoff to turn GPS OFF

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Force FW upgrade from server


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the FW upgrade from server function Allows you to upgrade the router‘s FW via SMS
Action The action to be performed when this rule is met. Upgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: fw_upgrade

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Force Config update from server


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Config update from server function Allows you to load a different configuration file on to your router via SMS
Action The action to be performed when this rule is met. Upgrades your router's current Configuration to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: config_update

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Switch monitoring ON/OFF


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Switch monitoring function Allows you to control monitoring status via SMS
Action The action to be performed when this rule is met. Turns remote monitoring ON or OFF
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: monitoringon to turn remote monitoring ON; monitoringoff to turn remote monitoring OFF;

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Monitoring status


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Monitoring status function Allows you to get monitoring status via SMS
Action The action to be performed when this rule is met. Returns a text message containing information about remote monitoring status
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: monitoring_status

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Switch output ON/OFF


FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Switch output function Allows output control via SMS
Action The action to be performed when this rule is met. Turns specified output ON or OFF
Active timeout Make the rule active for a specific time;

format: seconds

Example: if you configure a rule to turn a specific output on and set a 30 s timeout, the output will activate once the router receives the SMS messages and then it will deactivate after a period of 30 s
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: " "

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

Output type Which output will be activated Possible values:

Digital OC output | Relay output; Default: Digital OC output

NOTE: No default SMS text is provided for this rule. It can be created via the New SMS Rule tab.

Change mobile data settings (cellular) rule


The Change mobile data settings rule is exceptional to most of the other rules as it does not perform a single action like turning specific services On/Off or getting status updates. It designed to change mobile data settings and it's SMS text can't be described by a single string because the message depends on what configurations you want to change. For example, you can send a message that will change your APN only, you can send a message that will change APN and mobile service mode, or even a message that will change every single mobile setting.

Change mobile data settings
FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the Change mobile data settings function Allows you to change mobile settings via SMS
Action The action to be performed when this rule is met. Changes the specified mobile settings
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default: cellular

Detailed explanations on how to use this function are presented in the table below

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

The default SMS text for the Change mobile data settings rule is cellular but it is only an indication text and does not include any specific parameters to be changed. The list of parameters that can be changed and explanations on how to incorporate them into the "cellular" message is presented in the table below.

Mobile Settings via SMS parameters
PARAMETER VALUE DESCRIPTION DEFAULT MESSAGE EXAMPLE
apn= e.g., internet.gprs Sets APN cellular apn=internet.gprs
dialnumber= e.g., *99***1# Sets Dialing number cellular dialnumber=*99***1#
auth_mode= none | pap | chap Sets Authentication method cellular auth_method=pap
service= 2gonly | 3gonly | 4gonly | auto Sets the mobile Service mode cellular service=auto
username= e.g., user Sets the user name for PAP or CHAP authentication cellular username=user
password= e.g., pass Sets the password for PAP or CHAP authentication cellular password=pass
roaming= 0 for OFF; 1 for ON Turn Mobile data roaming ON or OFF cellular roaming=0

Each of the above examples contain a single parameter but you can send out multiple parameters in one message. For example, "cellular apn=internet.gprs service=3gonly". This message would set your APN to "internet.gprs" and your Service mode to 3G Only. You can also send a message that would include all of the parameters above: "cellular apn=internet.gprs dialnumber=*99***1# auth_mode=pap service=3gonly username=user password=pass"

UCI API rule


The UCI rule lets you set or get any parameter from the router's configuration files.

UCI API
FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the UCI API function Allows you to set or get any configurations from the router
Action The action to be performed when this rule is met. Sets or sends you any specified configurations of the router
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Default text: uci

Detailed explanations on how to use this function are presented in the table below

Authorization method What kind of authorization to use for SIM management Possible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed users White list of allowed users Possible values:

From all numbers | From group | From single number; Default: From all numbers

The following are syntax examples for the UCI API rule:

UCI API syntax
SYNTAX DESCRIPTION DEFAULT MESSAGE EXAMPLE
uci get config.section.option" Returns config option value uci get network.wan.ipaddr - returns the router's WAN IP address
uci set config.section.option="value" Sets config option uci set wireless.wifi-iface.key="12345678" - sets WiFi interface's password to 12345678
uci show config Returns the contents of a config file uci show openvpn - returns the contents of the openvpn config file
uci show config.section Returns the exact part of a config file (either section or the exact option value) uci show network.ppp - returns the contents of the ppp interface section from the network config file

As you can see, the UCI rule requires that you know the names of the configuration files and the names of the sections and parameters that they hold. You can find the config file list and some examples of UCI usage in general in our UCI command usage article.

Custom Rules


If default rules do not suit your purposes, you can also configure custom SMS rules. To do so, go to the bottom of the SMS Utilities page, where you will find the New SMS Rule tab. Select an Action and press the Add button located next to it.

Configuring a new rule is very similar to editing default rules: you are provided with a list of Actions, other fields are generated in accordance with which Action you choose.

Call Utilities

Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.

There is only one default rule (Reboot) configured and it is disabled. To make a new rule click the Edit button located next to the one default rule or make an entirely new entry for you Call Rules list by adding a rule from the New Call Rule tab.

Call Configuration


The Call Configuration window is similar to SMS Configuration, but less complex.

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable yes | no; Default: no Allows router's Call rules
Action Reboot | Send status | Send WiFi | Send mobile data | Send output; Default: Reboot The action to be performed when this rule is met
Allowed users From all numbers | From group | From single number; Default: From all numbers White list of allowed users
Get status via SMS after reboot yes | no; Default: no If checked, the router will send a status message once it has rebooted and is operational again
Message text string; Default: Router name - %rn; WAN IP - %wi; Data Connection state - %cs; Connection type - %ct; Signal Strenght - %ss; New FW available - %fs; Which status information should be included in SMS:

Data state, Operator, Connection type, Signal Strength, Connection State, IP

User Groups

User Groups provides you with the possibility to group phone numbers for SMS management purposes. You can then later use these groups in all related SMS and call functionalities. This option helps if there are several Users who should have the same roles when managing the router via SMS or calls. You can create a new user group by entering a name in the Group name text field and clicking the Add button located next to it in the Create New User Group section. After this you will re redirected get to the Modify User Group section.

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Group name string; Default: " " Name of the group of phone numbers. Used for easier management purposes
Phone number phone number; Default: " " Add numbers to the user group. Must match international format. You can add more phone number fields by clicking on the green () symbol

SMS Management

With the help of the SMS Management window you can read and send SMS messages.

Read SMS


In the Read SMS tab you can read and delete received/stored SMS messages. The layout is simple, there is a list of received SMS messages and you can choose how many entries of that list should visible at one time with SMS per page drop box in the top left corner of the page and there is a Search field to help you navigate more efficiently through the list of messages in the top right corner of the page.

Send SMS


The Send SMS tab lets you send SMS messages from the router‘s SIM card.

All you have to do is enter the recipient’s phone number, type in your message and hit the Send button. If everything went well, a green bar saying Message sent should appear (image below).

Storage


The Storage tab shows you how much SIM card memory space is used and how much is still available. You can also chose the option for the router to not delete messages. If this option is not used, the router will automatically delete all incoming messages after they have been read. Message status read/unread is examined every 60 seconds. All read messages are deleted.

Remote Configuration

RUT routers can be configured via SMS from another RUT router. You only have to select which configuration details have to be sent and type in the phone number of the other router. The router will then generate the SMS Text needed for the configurations to be applied. Total count of SMS is managed automatically. You should be aware of the possible number of SMS and use this feature at your own responsibility. Generally, it should not be used if you have a high cost per SMS. This is especially relevant if you will try to send a whole OpenVPN configuration, which might accumulate to about 40 SMS messages.

Receive Configuration


This section controls how the configuration initiation party should identify itself.

FIELD NAME VALUE DESCRIPTION
Enable string; Default: " " Name of the group of phone numbers. Used for easier management purposes
Authorization method No authorization | By serial | By router admin password; Default: No authorization What kind of authorization will be used to authenticate remote configurations
Allowed users From all numbers | From group | From single number; Default: From all numbers White list of allowed users that can send remote configurations to the router

Send Configuration


This section lets you configure remote RUTxxx devices via SMS. The authorization settings must match those that are set on the receiving party. An example of how sending a new network configuration with both WAN and LAN settings is presented below.

FIELD NAME VALUE DESCRIPTION
Generate SMS New | From current configuration; Default: New Select whether the configuration will be newly generated or the router's current configuration
WAN yes | no; Default: no Select whether to send WAN (Wide Area Network) configurations
Interface Wired | Mobile; Default: Mobile Which interface type will be used for WAN connection on the remote device
Primary SIM card SIM1 | SIM2; Default: SIM1 Which SIM card will be used as Primary on the remote device
Mobile connection Use PPP mode | Use NDIS mode | Use NCM mode | Use QMI mode | Use QMI mode used for Quectel EC25-E modem; Default: Use PPP mode Which mobile connection type will be used on the remote device; select according to the remote device's modem:

NDIS for Huawei modems

NCM for Telit modems

QMI for Quectel modems

PPP for any modem

APN string; Default: " " APN that will be used on the remote device. APN is the name of a gateway between a GPRS or 3G mobile networks and another computer network, frequently the public Internet. APN is provided by your Internet Service Provider (ISP)
Dialing number string; Default: " " Dialing number that will be used on the remote device. A Dialling number is used to establish a mobile PPP connection
Authentication method CHAP | PAP {{!} None; Default: None Mobile authentication method that will be used on the remote device. Mobile Authentication methods are used to authenticate new connections on your GSM carrier's network
User name string; Default: " " User name used for new connection authentication with CHAP or PAP authentication methods. This field only becomes visible when you select CHAP or PAP authentication methods.
Password string; Default: " " Password used for new connection authentication with CHAP or PAP authentication methods. This field only becomes visible when you select CHAP or PAP authentication methods.
Service mode 2G Only | 2G preferred | 3G Only | 3G preferred | 4G (LTE) Only | 4G (LTE) preferred | Automatic; Default: 3G preferred Mobile service mode that will be used on the remote device
LAN yes | no; Default: no LAN IP address that will be used on the remote device
IP address ip; Default: " " LAN IP address that will be used on the remote device
IP netmask ip; Default: " " A subnet mask that the remote router will use to define how large the LAN network is
IP broadcast ip; Default: " " A logical address at which all devices connected to a multiple-access communications network are enabled to receive datagrams

This is an example of only one scenario but you can also send different Network and VPN settings. The settings being sent are the same as they would be configured on your router locally, therefore, you can find information on what different Network and VPN parameters do in LAN, WAN, Mobile and VPN pages of this wiki.

Statistics

The Statistics page represents information about sent and received SMS messages of both SIM cards. The counters can be reset by clicking the Reset button next to each SIM card.

File:Services sms utils statistics.PNG