Difference between revisions of "Template:Networking rutxxx manual network mobile 3g"

From Teltonika Networks Wiki
(One intermediate revision by one other user not shown)
Line 12: Line 12:
 
     <tr>
 
     <tr>
 
         <td>Data connection state</td>
 
         <td>Data connection state</td>
−
         <td>Indicates whether the device has an active mobile data connection.</td>
+
         <td>Indicates whether the device has an active mobile data connection</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>IMEI</td>
 
         <td>IMEI</td>
−
         <td>The IMEI (International Mobile Equipment Identity) is a unique 15 decimal digit number used to identify cellular modules. GSM network operators use the IMEI to identify devices in their networks.</td>
+
         <td>The IMEI (International Mobile Equipment Identity) is a unique 15 decimal digit number used to identify cellular modules. GSM network operators use the IMEI to identify devices in their networks</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>IMSI</td>
 
         <td>IMSI</td>
−
         <td>The IMSI (international mobile subscriber identity) is a unique 15 decimal digit (or less) number used to identify the user of a cellular network.</td>
+
         <td>The IMSI (international mobile subscriber identity) is a unique 15 decimal digit (or less) number used to identify the user of a cellular network</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>ICCID</td>
 
         <td>ICCID</td>
−
         <td>SIM card's ICCID is a unique serial number used to identify the SIM chip.</td>
+
         <td>SIM card's ICCID is a unique serial number used to identify the SIM chip</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 39: Line 39:
 
     <tr>
 
     <tr>
 
         <td>Signal strength</td>
 
         <td>Signal strength</td>
−
         <td>Received signal strength indicator (<b>[[RSSI]]</b>) measured in dBm. Values closer to 0 indicate a better signal strength.</td>
+
         <td>Received signal strength indicator (<b>[[RSSI]]</b>) measured in dBm. Values closer to 0 indicate a better signal strength</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Cell ID</td>
 
         <td>Cell ID</td>
−
         <td>The ID of the cell that the modem is currently connected to.</td>
+
         <td>The ID of the cell that the modem is currently connected to</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 65: Line 65:
 
     <tr>
 
     <tr>
 
         <td>Operator</td>
 
         <td>Operator</td>
−
         <td>Network operator's name.</td>
+
         <td>Network operator's name</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 92: Line 92:
 
     <tr>
 
     <tr>
 
         <td>Connected band</td>
 
         <td>Connected band</td>
−
         <td>Currently used frequency band. For more information on supported frequency bands, <b>[[{{{name}}} Supported Frequency Bands|click here]]</b>.</td>
+
         <td>Currently used frequency band. For more information on supported frequency bands, <b>[[{{{name}}} supported frequency bands|click here]]</b></td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Bytes received</td>
 
         <td>Bytes received</td>
−
         <td>Amount of data received through the mobile interface.</td>
+
         <td>Amount of data received through the mobile interface</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Bytes sent</td>
 
         <td>Bytes sent</td>
−
         <td>Amount of data sent through the mobile interface.</td>
+
         <td>Amount of data sent through the mobile interface</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Restart Modem</td>
 
         <td>Restart Modem</td>
−
         <td>Reboots the device's cellular module.</td>
+
         <td>Reboots the device's cellular module</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Restart Connection</td>
 
         <td>Restart Connection</td>
−
         <td>Restarts the mobile connection.</td>
+
         <td>Restarts the mobile connection</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>(Re)register</td>
 
         <td>(Re)register</td>
−
         <td>Registers to the mobile network.</td>
+
         <td>Registers to the mobile network anew</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Refresh</td>
 
         <td>Refresh</td>
−
         <td>Refreshes all information fields in the page.</td>
+
         <td>Refreshes all information fields in the page</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>

Revision as of 10:25, 14 March 2019

Mobile

The Mobile section displays information about the mobile connection and the SIM card in use. The figure below is an example of the Mobile page:

[[File:{{{file_mobile}}}]]

field name description
Data connection state Indicates whether the device has an active mobile data connection
IMEI The IMEI (International Mobile Equipment Identity) is a unique 15 decimal digit number used to identify cellular modules. GSM network operators use the IMEI to identify devices in their networks
IMSI The IMSI (international mobile subscriber identity) is a unique 15 decimal digit (or less) number used to identify the user of a cellular network
ICCID SIM card's ICCID is a unique serial number used to identify the SIM chip
SIM card state The current SIM card state. Possible values are:
  • Ready - SIM card is inserted and ready to be used
  • Inserted - SIM card is inserted
  • Not inserted - SIM card is not inserted
  • Unknown - unable to obtain SIM card state value. Possible communication issue between the the device and the modem
Signal strength Received signal strength indicator (RSSI) measured in dBm. Values closer to 0 indicate a better signal strength
Cell ID The ID of the cell that the modem is currently connected to
Signal level measurements Overall signal quality is defined by different measurements for different connection types. Short explanations and recommendations are provided below. Click here for more in-depth information or click on one of the links below:
  • 3G
    • EC/IO - downlink carrier-to-interference ratio. Values range from -20 to 0 (closer to 0 indicates better signal quality/cleanliness)
    • RSCP - received signal code power. Values range from -124 to 0 (closer to 0 indicates better signal stength)
  • 2G
    • RSSI - received signal strength indicator, measured in dBm. Values closer to 0 indicate better signal strength
Operator Network operator's name
Operator state Shows whether the network has currently indicated the registration of the mobile device. Possible values are:
  • Unregistered - not registered to a network and the device is not currently searching for a new operator to register to
  • Registered (home) - registered, home network
  • Searching - not registered to a network, but the device is currently searching for a new operator to register to
  • Network denied - registration to network denied by operator
  • Unknown - operator state is currently unknown
  • Registered (roaming) - registered to network, roaming conditions
Connection type Mobile connection connection type. Possible values are:
  • 2G: 2G (GSM), 2G (GPRS), 2G (EDGE)
  • 3G: 3G (WCDMA), 3G (HSDPA), 3G (HSUPA), 3G (HSPA), 3G (HSPA+), 3G (DC-HSPA+), 3G (HSDPA+HSUPA), UMTS
  • N/A - not possible to determine at the moment
Connected band Currently used frequency band. For more information on supported frequency bands, [[{{{name}}} supported frequency bands|click here]]
Bytes received Amount of data received through the mobile interface
Bytes sent Amount of data sent through the mobile interface
Restart Modem Reboots the device's cellular module
Restart Connection Restarts the mobile connection
(Re)register Registers to the mobile network anew
Refresh Refreshes all information fields in the page
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutxxx_manual_network_mobile_3g&oldid=30585"