RUT850 SMS Gateway: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
(One intermediate revision by the same user not shown)
Line 1: Line 1:
==Summary==
{{Template: Networking_rut850_manual_sms_gateway
 
| name                   = RUT850
This chapter is a summary of the SMS Gateway function of RUT routers.
| series                  = RUT8xx
 
| file_post_get          = Networking_device_manual_sms_gateway_post_get_v1.png
==Post/Get Configuration==
| file_scheduled_sms      = Networking_device_manual_sms_gateway_scheduled_sms_v2.png
 
| file_scheduled_sms_conf = Networking_device_manual_sms_gateway_scheduled_sms_configuration_v1.png
'''Post/Get Configuration''' allows you to perform action requests by writing them in the URL after your device’s IP address.
| file_auto_reply         = Networking_device_manual_sms_gateway_auto_reply_v1.png
 
}}
[[Image:Services sms gateway postget.PNG]]
 
<table class="nd-mantable">
    <tr>
        <th>field name</th>
      <th>value</th>
      <th>description</th>
    </tr>
    <tr>
      <td>Enable*</td>
      <td>yes | no; Default: '''no'''</td>
      <td>Toggles Post/Get ON or OFF</td>
    </tr>
    <tr>
      <td>Username</td>
      <td>string; Default: " "</td>
      <td>User name used for authorization</td>
    </tr>
    <tr>
    <td>Password</td>
        <td>tring; Default: " "</td>
        <td>Password used for authorization</td>
    </tr>
</table>
'''*Do not forget to change parameters in the URL according to your POST/GET Configuration!'''
 
===SMS by HTTP POST/GET===
----
It is possible to read and send SMS messages by using a valid '''HTTP POST/GET''' syntax. Use a web browser or any other compatible software to submit '''HTTP POST/GET''' strings to the router. The router must be connected to a GSM network when using the '''Send SMS''' feature.
 
<table class="nd-mantable">
    <tr>
        <th style="width: 300px">ACTION</th>
      <th style="width: 1450px">POST/GET URL EXAMPLE</th>
    </tr>
    <tr>
      <td>View mobile messages list</td>
      <td>http://youripaddress/cgi-bin/sms_list?username=admin&password=admin01</td>
    </tr>
    <tr>
      <td>Read mobile message</td>
      <td>http://youripaddress/cgi-bin/sms_read?username=admin&password=admin01&number=1</td>
    </tr>
    <tr>
    <td>Send mobile message</td>
        <td>http://youripaddress/cgi-bin/sms_send?username=admin&password=admin01&number=0037060000001&text=testmessage</td>
    </tr>
    <tr>
    <td>View mobile messages total</td>
        <td>http://youripaddress/cgi-bin/sms_total?username=admin&password=admin01</td>
    </tr>
    <tr>
    <td>Delete mobile message</td>
        <td>http://youripaddress/cgi-bin/sms_delete?username=admin&password=admin01&number=1</td>
    </tr>
</table>
 
'''youripaddress''' - router's LAN IP address; '''username''' - router's login admin user name; '''password''' - router's login password; '''number''' - SMS message index number or recipient's phone number (phone number must contain country code. Phone number format is: 00{COUNTRY_CODE} {RECEIVER_NUMBER}, e.g., 0037062312345 (370 is country code and 62312345 is receiver's phone number)); '''text''' - SMS message text
 
==Scheduled SMS==
 
'''Scheduled SMS''' allows you to periodically send automated SMS messages to a specified number. Scheduled messages are managed in rule form, i.e., similar to '''SMS Utilities'''. Therefore, to configure a new Scheduled Message, we must first create a rule. To create a new rule, type in a phone number in the '''Phone number''' field located in the '''Scheduled Messages Configuration''' section and press the '''Add''' button located next to it.
 
After this you will be redirected to the '''Scheduled Messages Configuration''' window.
 
===Scheduled Messages Configuration===
----
Apart from the phone number, the new rule will be disabled and unconfigured. This section is an overview '''Scheduled Messages Confiugration'''. To configure your rule, simply click the '''Edit''' button located next to it.
 
[[Image:Services sms gateway scheduled.PNG ]]
 
<table class="nd-mantable">
    <tr>
        <th>field name</th>
      <th>value</th>
      <th>description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>yes | no; Default: '''no'''</td>
      <td>Toggles the rule ON or OFF</td>
    </tr>
    <tr>
      <td>Recipient's phone number</td>
      <td>phone number; Default: " "</td>
      <td>Phone number that will receive the scheduled messages</td>
    </tr>
    <tr>
    <td>Message text</td>
        <td>string; Default: " "</td>
        <td>The message that will be sent</td>
    </tr>
    <tr>
    <td>Message sending interval</td>
        <td>time; Default: '''Day, hour 1, minute 1'''</td>
        <td>The frequency at which scheduled messages will be sent</td>
    </tr>
</table>
 
==Auto Reply==
 
'''Auto reply''' allows you to configure automatic replying to SMS messages that the router receives from everyone or from listed numbers only.
 
[[Image:Services sms gateway auto reply.PNG]]
 
<table class="nd-mantable">
    <tr>
        <th>field name</th>
      <th>value</th>
      <th>description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>yes | no; Default: '''no'''</td>
      <td>Toggles Auto Reply ON or OFF</td>
    </tr>
    <tr>
      <td>Reply SMS Utilities rules</td>
      <td>yes | no; Default: '''no'''</td>
      <td>If enabled, the router will auto reply even SMS Utilieties rules</td>
    </tr>
    <tr>
    <td>Don't save received messages</td>
         <td>yes | no; Default: '''no'''</td>
        <td>If enabled, the router will delete received SMS messages</td>
    </tr>
    <tr>
    <td>Mode</td>
        <td>Everyone | From listed number only; Default: '''Everyone'''</td>
        <td>Specifies whether to auto reply to every phone number or just just specified phone numbers</td>
    </tr>
    <tr>
    <td>Message text</td>
        <td>string; Default: " "</td>
        <td>The message that will be sent in reply</td>
    </tr>
    <tr>
    <td>Recipient's phone number</td>
        <td>phone number; Default: " "</td>
        <td>Phone number(s) that will qualify for Auto Reply. To add more numbers, click the [[Image:Services sms gateway auto reply plus symbol.PNG]] symbol. This field only becomes visible if the chosen Mode is '''From listed numbers only'''</td>
    </tr>
</table>
 
[[Category:RUT850 WebUI]]

Revision as of 16:32, 9 April 2019

Main Page > EOL Products > RUT850 > RUT850 Manual > RUT850 WebUI > RUT850 Services section > RUT850 SMS Gateway

Summary

The SMS Gateway service is used to set up various SMS related (mostly automated) functions. This chapter is a summary of the SMS Gateway service of RUT850 routers.

Post/Get

The Post/Get Configuration section is used to turn ON and configure SMS related post/get settings. When the function is enabled, it provides you with the possibility to perform SMS related action requests by writing them in the URL field of your web browser.

The figure below is an example of the Post/Get Configuration page and the table below provides information on fields contained in that page:

Field name Value Description
Enable yes | no; Default: no Turns SMS post/get ON or OFF
Username string; Default: user1 User name used for authorization when sending post/get requests
Password string; Default: user_pass Password used for authorization when sending post/get requests

SMS Post/Get usage examples

Use a web browser or any other compatible software to send HTTP post/get strings to the router. The router must be connected to a GSM network when using the Send SMS feature. Below you will find a table with possible actions and examples on how to use them:

Action Post/get URL examples
View mobile messages list http://192.168.1.1/cgi-bin/sms_list?username=user1&password=user_pass
Read mobile message http://192.168.1.1/cgi-bin/sms_read?username=user1&password=user_pass&number=1
Send mobile message http://192.168.1.1/cgi-bin/sms_send?username=user1&password=user_pass&number=0037060000001&text=testmessage
View mobile messages total http://192.168.1.1/cgi-bin/sms_total?username=user1&password=user_pass
Delete mobile message http://192.168.1.1/cgi-bin/sms_delete?username=user1&password=user_pass&number=1
  • 192.168.1.1 - router's IP address. (Replace it with your LAN IP or WAN IP (when connecting remotely))
  • SMS related post/get commands. Possible values are:
    • sms_list - view all SMS messages in storage
    • sms_read - read a single SMS message by specified SMS index (number)
    • sms_send - send an SMS message to specified recipient
    • sms_total - display SMS storage statistics
    • sms_delete - delete a single SMS message by specified SMS index (number)
  • & - separation symbol. After specifying the SMS command, other parameters must be separated by an ampersand (&) symbol
  • username - SMS post/get configuration user name
  • password - SMS post/get configuration password
  • number - SMS message index or (depending on context) recipient's phone number. SMS message indexes can be viewed with the sms_list command.
    Correct phone number format is:
    • 00 - number must be preceded by two zeros
    • <country_code> - the next following element is the number holder's country code
    • <receivers_number> - phone number of the recipient

    For example, a valid number would be 0037012345678 (370 is country code and 12345678 is the receiver's phone number, all preceded by 00)

  • text - SMS message text

Scheduled SMS

Scheduled SMS allows you to set up the router to periodically send SMS messages to a specified number. Scheduled messages are managed in rule form. Therefore, to configure a new Scheduled Message, we must first create a rule. To create a new rule, type in a phone number in the Phone number field located in the Scheduled Messages Configuration section and click the Add button located next to it.

After this you will be redirected to the Scheduled Messages Configuration window where you can configure all parameters related to the rule. Once you save the configuration, you will be redirected back to the Scheduled SMS page, where you will see your new rule in the Messages To Send section:

Scheduled Messages Configuration

The figure below is an example of the Scheduled Messages Configuration window and the table below provides information on the field contained in that window:

File:Networking device manual sms gateway scheduled sms configuration v1.png

Field name Value Description
Enable yes | no; Default: no Turns the rule ON or OFF
Recipient's phone number phone number; Default: none Phone number of th erecipient that will receive the scheduled messages
Message text string; Default: none The message that will be sent
Message sending interval time; Default: Day, hour 1, minute 1 The frequency at which scheduled messages will be sent

Auto Reply

Auto reply is a function that responds to received SMS messages with a user defined automatic response. The figure below is an example of the Auto Reply section and the figure below provides information on the fields contained in that section:

field name value description
Enable yes | no; Default: no Turns Auto Reply ON or OFF
Reply SMS Utilities rules yes | no; Default: no When enabled, the router will also reply to messages that trigger SMS Utilities rules
Don't save received messages yes | no; Default: no When enabled, the router deletes all received SMS messages
Mode Everyone | Listed numbers; Default: Everyone Indicates whether the router should reply to messages from all recipients or just the specified numbers
Message text string; Default: none Text that will be sent in the automatic response
Recipient's phone number phone number; Default: none Phone number(s) that will trigger Auto Reply. To add multiple numbers, click the symbol.
This field becomes visible if the chosen Mode is "From listed numbers only"
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=RUT850_SMS_Gateway&oldid=31822"