|
|
(61 intermediate revisions by 6 users not shown) |
Line 1: |
Line 1: |
− | {{Template: Networking_rutos_firmware_downloads | + | {{Template:Networking RUT2xx firmware |
− | <!------------------------DEVICE----------------------->
| + | | name = RUT230 |
− | | name = RUT230 | |
− | | series = RUT2
| |
| }} | | }} |
− |
| |
− | ==Changelog==
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.03.4_WEBUI.bin|RUT2_R_00.07.03.4]]</b> | 2023.02.09===
| |
− |
| |
− | <i>RUT2_R_00.07.03.4 is <u>the last FW version</u> with support for RUT230.</i>
| |
− |
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Changed generic modem restart method
| |
− | *** Fixed mobile page VoLTE switching issues
| |
− | *** Fixed CVE-2023-32349 vulnerability
| |
− | ** <b>Services</b>
| |
− | *** Sanitized tcpdump storage location
| |
− | ** <b>System</b>
| |
− | *** Fixed legacy backup upload
| |
− | *** Fixed upgrade from legacy FW issue with keep settings
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.03.3_WEBUI.bin|RUT2_R_00.07.03.3]]</b> | 2023.01.25===
| |
− |
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed disabled WiFi interface after factory reset
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.03.2_WEBUI.bin|RUT2_R_00.07.03.2]]</b> | 2023.01.13===
| |
− |
| |
− | * <b>New</b>
| |
− | ** <b>System</b>
| |
− | *** Japanese language
| |
− |
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Optimized mobile netifd script installation
| |
− |
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Shortened modem hang monitor timeout
| |
− | *** Fixed VLAN option setting when changing VLAN ID
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.03.1_WEBUI.bin|RUT2_R_00.07.03.1]]</b> | 2023.01.03===
| |
− |
| |
− | * <b>Improvements</b>
| |
− | ** <b>System</b>
| |
− | *** Remove front-end certificate validation
| |
− | ** <b>Network</b>
| |
− | *** Optimized mobile netifd script installation
| |
− |
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed modem communication validation
| |
− | *** Fixed connection establishment in IPv6 only mode
| |
− | ** <b>Services</b>
| |
− | *** Fixed libxml2 vulnerability CVE-2022-40303
| |
− | *** Fixed an IPsec Phase one & two setting migration issue
| |
− | *** Fixed OpenVPN migration from legacy firmwares
| |
− | *** Fixed not being able to create or edit PPTP instances after upgrading from legacy firmware
| |
− | ** <b>System</b>
| |
− | *** Fixed JSON key parsing; keys can now be any printable character sequence
| |
− | *** Fixed memory leak in 'session' module
| |
− | ** <b>WebUI</b>
| |
− | *** Fixed file pretty name parsing
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.03_WEBUI.bin|RUT2_R_00.07.03]]</b> | 2022.12.16===
| |
− |
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** Firewall DMZ page
| |
− | ** <b>Services</b>
| |
− | *** Java package
| |
− | *** SFTP server support
| |
− | *** OPC UA client
| |
− | *** Hotspot registered users management page
| |
− | ** <b>System</b>
| |
− | *** Portuguese language
| |
− | *** Spanish language
| |
− | *** Turkish language
| |
− | *** Email Relay package
| |
− | ** <b>WebUI</b>
| |
− | *** New Web menu design
| |
− |
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Updated modem handling, attachment, tracking and connection establishment processes
| |
− | *** Added the possibility to select multiple ports in all firewall port fields
| |
− | *** Added 'Match' traffic by type option to firewall traffic rules
| |
− | *** Added DNS servers and routing table fields to the Wireguard page
| |
− | *** Improved generating network topology
| |
− | *** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
| |
− | *** Update Firewall Traffic Rules page with DSCP and MARK options
| |
− | *** Added keepalive, holdtime and connect timers to BGP configuration
| |
− | *** Added 'Use gateway metric' to network protocols web interface
| |
− | *** Added more DHCPv6 client events to system log
| |
− | *** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
| |
− | *** Added option to select subnet parameters in mobile Passthrough/Bridge modes
| |
− | *** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
| |
− | *** Added mobile connection state for IPv6
| |
− | *** Added individual WiFi toggle support
| |
− | *** Added error message when DFS channel is selected during scanning
| |
− | ** <b>Services</b>
| |
− | *** Added CSP headers to Hotspot Landing Page
| |
− | *** Added hotspot user script validation
| |
− | *** Improved logging of disconnecting client devices
| |
− | *** Implemented Hotspot 'forget' method, which removes user from DB by MAC
| |
− | *** Added execute custom script SMS Utilities rule
| |
− | *** Added receiver and transceiver mode support to SMPP
| |
− | *** Added timezone synchronization with GSM operator option to NTP Client
| |
− | *** Updated Zerotier web interface
| |
− | *** Added IPsec Flush connection option on tunnel initialization
| |
− | *** Added MODBUS slave regfile validation
| |
− | *** Added delay, number of timeouts, always reconnect options to MODBUS Master service
| |
− | *** Added DMVPN Phase 2 and Phase 3 support
| |
− | *** Added synchronization counting to NTP client
| |
− | *** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
| |
− | *** Added 'Unregister' button to RMS page
| |
− | *** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
| |
− | *** Updated Zerotier package to version 1.10.1
| |
− | *** Added automatic package removal upon failed installation in Package Manager
| |
− | *** Added option to describe custom routing table and MTU auto counting to Wireguard VPN
| |
− | *** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
| |
− | *** Updated sqm-scripts to version 1.5.1
| |
− | *** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
| |
− | *** Added monthly reboot option to periodic reboot function
| |
− | *** Added support for multiple custom option selection to SSTP configuration
| |
− | *** Added PKCS12 certificate chain support to OpenVPN
| |
− | *** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
| |
− | *** Added QoS selection to MQTT Modbus Gateway
| |
− | *** Improved RAM usage during upload and installation of packages via Package Manager
| |
− | *** Updated curl to version 7.86.0
| |
− | *** Added brute-force prevention measures to Post/Get
| |
− | *** Added automatic private and public key generation to Wireguard VPN
| |
− | *** Added multiple Remote source IP support to IPsec
| |
− | *** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
| |
− | *** Added functionality to rotate log file when log is saved to Flash memory
| |
− | *** Improved performance while fetching packages on repeat visits to the Package Manager page
| |
− | ** <b>System</b>
| |
− | *** Added a 'test mail' button to the Administration -> Recipients page
| |
− | *** Added option to clear blocked IPs in the Access Control page after reboot
| |
− | *** Updated Web Request-Response core logic
| |
− | *** Added certificate validation to all services that support certificate upload
| |
− | *** Updated URL protocol validations
| |
− | *** Removed profile update requests during Save & apply
| |
− | *** Optimized profile switching logic
| |
− | ** <b>WebUI</b>
| |
− | *** Added an indication to the Interfaces page that displays when data limit is enabled
| |
− | *** Added bootloader version to the Device section in the System page
| |
− | *** Added configuration page shortcuts to Overview page widgets
| |
− | *** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
| |
− | *** Updated network interfaces protocols web interface
| |
− | *** Updated 404 page to include navigation menu
| |
− |
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed CVE-2023-32350 vulnerability
| |
− | *** Fixed jumbo frames MTU issue
| |
− | *** Added the 'Any' choice to source & destination IP address field in NAT rule edit
| |
− | *** Fixed NHRP web interface issues
| |
− | *** Fixed WAN interface configuration interfering with LAN
| |
− | *** Fixed mdcollect memory leak issue
| |
− | *** Fixed data limit not resetting properly
| |
− | *** Fixed incorrect mobile data usage calculations for multiple day periods
| |
− | *** Fixed an Auto APN 'Keep settings' issue
| |
− | *** Fixed data counting after mobile data limit has been reached
| |
− | *** Fixed mobile band not setting correctly on first try
| |
− | *** Fixed incorrect data limit conditions causing unwanted SIM switches
| |
− | *** Fixed Passthrough DHCP lease time setting
| |
− | *** Fixed mobile bridge mode issue when no DNS servers are supplied
| |
− | *** Added new Operator Lists instance name validations
| |
− | *** Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722
| |
− | *** Fixed wireless interfaces connections not reestablishing after disabling & enabling again
| |
− | *** Added wget tracking method to WAN Failover
| |
− | *** Added interface checks to remove inaccurate Failover events from the Event Log
| |
− | *** Fixed Wired WAN connectivity issue when Failover interfaces are disabled
| |
− | *** Fixed Failover fallback issue
| |
− | ** <b>Services</b>
| |
− | *** Fixed GRE, MQTT broker, IP alias, MAC filter & Failover migration from legacy firmwares
| |
− | *** Fixed relay state switching
| |
− | *** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
| |
− | *** Added I/O restart on configuration profile change
| |
− | *** Fixed I/O voltage range display for power socket pins
| |
− | *** Fixed SMNP OID for I/O state
| |
− | *** Fixed I/O Juggler SMS text message Save & Apply issue
| |
− | *** Fixed Hotspot connected user list maximum upload/download value limits
| |
− | *** Fixed incorrect connected Hotspot user information in RMS JSON
| |
− | *** Removed unnecessary field from the Port Mirroring page
| |
− | *** Fixed Hotspot issues related to specific connected phones
| |
− | *** Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients
| |
− | *** Fixed WiFi Scanner hostname validation issues
| |
− | *** Fixed UCI SMS Rule return message to display new changes
| |
− | *** Fixed DNP3 issues when asking for modem temperature
| |
− | *** Fixed base64 encoding of SMS messages when forwarding to HTTP
| |
− | *** Fixed SMS sending issues when using multiple APN
| |
− | *** Added Gateway modem option to IP Block and WoL in SMS Rule edit
| |
− | *** Fixed unblocking IP addresses with an SMS message
| |
− | *** Fixed Mobile Utilities page not load properly on some occasions
| |
− | *** Fixed dbus vulnerability CVE-2020-35512
| |
− | *** Fixed dnsmasq vulnerability CVE-2022-0934
| |
− | *** Fixed ext4 vulnerability CVE-2021-3428
| |
− | *** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594
| |
− | *** Fixed libxm12 vulnerability CVE-2022-29824
| |
− | *** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
| |
− | *** Fixed MQTT DoS vulnerability CVE-2021-41039
| |
− | *** Fixed privoxy vulnerability CVE-2021-44542
| |
− | *** Fixed python3 vulnerability CVE-2022-42919
| |
− | *** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
| |
− | *** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
| |
− | *** Fixed switching between RMS connection types while the device is unregistered
| |
− | *** Fixed reload issues in website blocking feature
| |
− | *** Fixed IPsec PSK secret required field validation
| |
− | *** Fixed bandwidth limiting after QoS is enabled for the first time
| |
− | *** Fixed Dropbear issues when logging in over IPv6
| |
− | *** Fixed Modbus status in Status -> Services page
| |
− | *** Fixed Azure IoT Hub application issues when sending large volumes of data
| |
− | *** Fixed Azure IoT Hub MQTT password validation
| |
− | *** Fixed DMVPN configuration migration issue
| |
− | *** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
| |
− | *** Fixed DMVPN IPsec connection issue
| |
− | *** Fixed DMVPN mobile interface 'Keep settings' migration issue
| |
− | *** Fixed Dynamic DNS long hostname text display issue
| |
− | *** Fixed Events Reporting memory leak issue
| |
− | *** Fixed Events Reporting not triggering after flipping an I/O slider
| |
− | *** Fixed FOTA cron job not starting after factory reset
| |
− | *** Fixed IPsec local firewall option parsing
| |
− | *** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
| |
− | *** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
| |
− | *** Fixed NTP pool hostname validation
| |
− | *** Fixed OpenVPN certificate remove with Static key and TLS authentication methods
| |
− | *** Fixed OpenVPN configuration saving issue when using HMAC key authentication
| |
− | *** Fixed OpenVPN custom dev name transformation to correct format
| |
− | *** Fixed OpenVPN device name setting logic when uploading config from file
| |
− | *** Fixed OpenVPN instance status display
| |
− | *** Fixed OpenVPN TAP (bridged) configuration detection
| |
− | *** Fixed Qos configuration saving issue occurring after instance deletion
| |
− | *** Fixed RMS JSON incorrect WAN state and IP information
| |
− | *** Fixed RMS step access issue in the Setup Wizard page
| |
− | *** Fixed SNMP issues after reboot while using a Hotspot
| |
− | *** Fixed SNMP generating MIB files for devices in accordance with to their hardware
| |
− | *** Fixed SNMP traps not working after SNMP is installed from server
| |
− | *** Fixed SSTP client route creation issue
| |
− | *** Fixed UPNP secure mode not turning off issue
| |
− | *** Fixed Wireguard route to endpoint issue
| |
− | *** Fixed manual package installation for queued packages
| |
− | *** Fixed NAT Rules dependency from IPsec web instance
| |
− | *** Returned usleep utility
| |
− | *** Updated Australian and South African NordVPN server IP addresses
| |
− | ** <b>System</b>
| |
− | *** Fixed certificate signing issues
| |
− | *** Fixed Telnet, CLI access blocking after max invalid tries
| |
− | *** Fixed FW upgrade with 'Keep settings' while low free space is available
| |
− | *** Fixed backup file duplication issue
| |
− | *** Fixed network device handling in system
| |
− | ** <b>WebUI</b>
| |
− | *** Fixed Hotspot interface display
| |
− | *** Fixed side widget accessibility during first login
| |
− | *** Fixed file upload issues
| |
− | *** Fixed drag and drop issue in the Traffic Rules page
| |
− | *** Fixed protocol display in the overview of the Interfaces page
| |
− | *** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
| |
− | *** Fixed login errors after browser tab restoration
| |
− | *** Fixed redirect to newly set IP address after Interface configuration
| |
− | *** Fixed firmware upgrade verify spinner not closing
| |
− | *** Fixed an issue with file upload via drag and drop
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.02.7_WEBUI.bin|RUT2_R_00.07.02.7]]</b> | 2022.09.12===
| |
− |
| |
− | * <b>Improvements:</b>
| |
− | ** Improved manual-auto connection mode
| |
− |
| |
− | * <b>Fixes</b>
| |
− | ** Fixed AT command for SMS storage usage
| |
− | ** Fixed CVE-2022-1012 memory leak vulnerability
| |
− | ** Fixed CVE-2022-37434 kernel vulnerability
| |
− | ** Fixed interface option reset after VLAN ID change
| |
− | ** Removed memory leak on port events
| |
− | ** Fixed WiFi Scanner out of range crash when iterating collected data
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.02.6_WEBUI.bin|RUT2_R_00.07.02.6]]</b> | 2022.08.24===
| |
− |
| |
− | * <b>Improvements:</b>
| |
− | ** Added 'home.vodafone.de' APN
| |
− | ** Improved stability of device information storage
| |
− |
| |
− | * <b>Fixes:</b>
| |
− | ** Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
| |
− | ** Fixed Serial-symlink dmesg messages{{#ifeq:{{{name}}}|RUT240|
| |
− | ** Fixed VoLTE management|}}
| |
− | ** Fixed OpenVPN tls-auth and tls-crypt option names
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.02.5_WEBUI.bin|RUT2_R_00.07.02.5]]</b> | 2022.08.12===
| |
− |
| |
− | * Improvements:
| |
− | ** Updated curl to version 7.83.1
| |
− | ** Updated firmware validation error messages
| |
− | ** Added multiple source IP address support to the Port Forwards page
| |
− | ** Increased custom APN Username & Password field maximum length to 64 symbols
| |
− | ** Added auto switch to modem's SMS storage when SIM card storage doesn't exist
| |
− | ** Improved mobile connection status handling
| |
− | ** Added CSP headers Hotspot WebUI landing page
| |
− |
| |
− | * Fixes:
| |
− | ** Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
| |
− | ** Fixed CVE-2022-30065 busybox vulnerability
| |
− | ** Fixed file upload path traversal
| |
− | ** Removed Data to Server limit to proccess less than 10 instances
| |
− | ** Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
| |
− | ** Fixed OpenVPN dev setting logic
| |
− | ** Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
| |
− | ** Fixed MAC and leasetime setting for Bridge & Passthrough modes
| |
− | ** Fixed modal tabs navigation when editing wireless interface with non-english languages
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.02.4_WEBUI.bin|RUT2_R_00.07.02.4]]</b> | 2022.07.20===
| |
− |
| |
− | * Improvements:
| |
− | ** Added default password change warning message before firmware downgrade
| |
− | ** Extended time period for device to make connection to operator
| |
− | ** Reduced the number of modem reboots when changing mobile settings
| |
− | ** Reduced excessive log output when no SIM card is inserted
| |
− | ** Added modem restart prevention on modem init
| |
− | ** Added disable RPLMN option in the SIM section of the SIM card config
| |
− |
| |
− | * Fixes:
| |
− | ** Fixed CVE-2022-2068 vulnerability
| |
− | ** Disabled autoconnect on stop-network call
| |
− | ** Fixed Hotspot login via landing page issue
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.02.2_WEBUI.bin|RUT2_R_00.07.02.2]]</b> | 2022.06.27===
| |
− |
| |
− | * Improvements:
| |
− | ** Added ping to DNS IPv6 support
| |
− | ** Added modem reset to default state after device FW upgrade
| |
− | ** Modem init now checks NVRAM sensitive commands before setting
| |
− | ** GSM output was made consistent
| |
− | ** Updated FSTools package to version 2022-05-03
| |
− | ** Added security headers to web requests
| |
− |
| |
− | * Fixes:
| |
− | ** Fixed CVE-2019-12900 libbz2 vulnerability
| |
− | ** Fixed behavior of some gsmctl commands
| |
− | ** Fixed CVE-2022-23303 hostapd vulnerability
| |
− | ** Fixed CVE-2022-29581 Linux kernel vulnerability
| |
− | ** Fixed CVE-2022-29458 ncurses vulnerability
| |
− | ** Fixed CVE-2022-1292 c_rehash script command injection vulnerability
| |
− | ** Fixed band locking issue
| |
− | ** Fixed race condition for wireless configuration initialization
| |
− | ** Fixed operator control issue
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.02.1_WEBUI.bin|RUT2_R_00.07.02.1]]</b> | 2022.06.06===
| |
− |
| |
− | * Improvements:
| |
− | ** Improved GSM related messages in Troubleshoot logs
| |
− |
| |
− | * Fixes:
| |
− | ** Fixed IGMP Proxy menu item not appearing after package installation
| |
− | ** Fixed default mobile network configuration generation
| |
− | ** Fixed MODBUS write requests and Mobile Utils option setting
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.02_WEBUI.bin|RUT2_R_00.07.02]]</b> | 2022.05.23===
| |
− |
| |
− | * <b>New features</b>
| |
− | ** Overview side widget
| |
− | ** IGMP Proxy
| |
− | ** Privileged Access Management (PAM)
| |
− | ** AWS Greengrass support
| |
− | ** HTTPS certificate and key upload feature
| |
− | ** SSH public keys edit box
| |
− | ** License page
| |
− | ** DNP3 data for Data to Server
| |
− |
| |
− | * <b>Improvements</b>
| |
− | ** Updated busybox to version: 1.34.1
| |
− | ** Updated curl to version 7.79.1
| |
− | ** Added iptables filter package for string filtering
| |
− | ** Added CHAP authentication for L2TP VPN
| |
− | ** Added IPv6 support for L2TPv3 VPN
| |
− | ** Added EAP-MSCHAPV2 authentication method for IPsec VPN
| |
− | ** Added IPv6 support to Auto Reboot
| |
− | ** Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
| |
− | ** Updated SNMP version 5.9.1
| |
− | ** Added OpenSSL authentication options to SNMPv3
| |
− | ** Added support for OSPF redistribution options and OSPF neighbors
| |
− | ** Added password field to BGP Peers page
| |
− | ** Extended BGP "AS" field validation to accept integers up to 4294967295
| |
− | ** Added "DHE+RSA" to OpenVPN cipher selections
| |
− | ** Increased OpenVPN max password length from 128 bytes to 512 bytes
| |
− | ** Made HMAC key direction initial value dependent on the role of the instance (client or server)
| |
− | ** Made HMAC key and HMAC authentication key upload fields required
| |
− | ** Added DES to IPsec encryption algorithms selections
| |
− | ** Added special character support for CHAP secrets
| |
− | ** Added validation requirements for PPTP user list username field
| |
− | ** Added option to manually enter Public key in Wireguard configuration
| |
− | ** Made generating Wireguard keys possible only while in auto mode
| |
− | ** Added Events Log database to troubleshoot archive
| |
− | ** Added RFC1918 filter field
| |
− | ** Added the possibility to unblock multiple blocked devices at once
| |
− | ** Added 'Port' column to blocked login attempts table
| |
− | ** Added Speedtest server refresh
| |
− | ** Updated Speedtest server list
| |
− | ** Added asterisk option to Site Blocking
| |
− | ** Added MD5 and SHA256 checksums to package validation page
| |
− | ** Changed certificate requirements to only require client key file if client certificate is used
| |
− | ** Added pagination and data retention between table pages
| |
− | ** Added pagination functionality to tables when there are more than 10 records
| |
− | ** Improved table sorting by saving user provided sort settings in the browser
| |
− | ** Improved drag and drop functionality
| |
− | ** Added the possibility to drag and drop files onto upload components
| |
− | ** Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
| |
− | ** Added 'Strict-Transport-Security' response header for HTTPS
| |
− | ** Added 'breadcrumbs' to modal windows
| |
− | ** Improved initial WebUI loading after login
| |
− | ** Added mobile bytes sent and bytes received SNMP OIDs
| |
− | ** Added mobile LED turn off feature ('System -> Administration' page)
| |
− | ** Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
| |
− | ** Updated mobile usage data point calculation logic
| |
− | ** Added the possibility to manually enter operator number
| |
− | ** Improved obtain mobile cell ID process
| |
− | ** Added modem restart if SIM card is removed during APN database fetching process
| |
− | ** Added unauthorized call logging
| |
− | ** Added space character support in SMS commands
| |
− | ** Disabled SMS modem storage configuration form when SIM is not inserted
| |
− | ** Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
| |
− | ** Added external modem SMS limit Overview card and widget
| |
− | ** Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
| |
− | ** Added duplicate value check for list configuration options
| |
− | ** Changed mobile card instance design
| |
− | ** Fixed 'Mobile Data usage reset' SMS rule
| |
− | ** Fixed the default state parameter of SMS list POST/GET command
| |
− | ** Added Hotspot configuration profiles
| |
− | ** Added local Hotspot user password hashing
| |
− | ** Added Hotspot password encoding option
| |
− | ** Improved Hotspot related firewall rule setting
| |
− | ** Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
| |
− | ** Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
| |
− | ** Added ubus support to Hotspot
| |
− | ** Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
| |
− | ** Added I/O SNMP trap
| |
− | ** Added ISO 8601 time format to I/O Juggler's '%ts' parameter
| |
− | ** Added device name parameter '%pc' to I/O Juggler
| |
− | ** Added PPPoE VLAN priority support
| |
− | ** Made VRRP ping section dependent on main instance
| |
− | ** Added 'WAN to LAN' switch
| |
− |
| |
− | * <b>Fixes</b>
| |
− | ** Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
| |
− | ** Fixed CVE-2022-28391 busybox vulnerability
| |
− | ** Fixed CVE-2018-16789 shellinabox vulnerability
| |
− | ** Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
| |
− | ** Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
| |
− | ** Fixed zlib backport security issue
| |
− | ** Fixed Wireguard firewall zone assignment
| |
− | ** Fixed queued packages disappearing from list after FW upgrade with keep settings
| |
− | ** Fixed error message display for multiple input validation rules
| |
− | ** Fixed incorrect DHCP validation range for start and limit fields
| |
− | ** Removed 'Bring up on boot' option from network interface configuration pages
| |
− | ** Fixed coma-separated DHCP options disappearing after save
| |
− | ** Fixed exclude and listen interfaces
| |
− | ** Fixed 'Use broadcast flag' option saving
| |
− | ** Fixed firewall zone assignment when creating new interfaces
| |
− | ** Fixed OpenVPN 'Netmask' and 'IP address' field validations
| |
− | ** Fixed OpenVPN TAP configuration saving issue
| |
− | ** Fixed OpenVPN switching to TUN mode when uploading a configuration from file
| |
− | ** Fixed dynamic BGP route state display
| |
− | ** Fixed BGP peer enable in edit page
| |
− | ** Fixed issue when no L2TP client instance could be bound to IPsec
| |
− | ** Fixed firewall rule and zone behavior related to config section creation
| |
− | ** Added default value for L2TPv3 netmask, which is now written to config after save
| |
− | ** Fixed passthrough option saving to IPsec file
| |
− | ** Fixed DMVPN issue where instance configuration could not be saved
| |
− | ** Fixed Wireguard peer could not be saved issue
| |
− | ** Fixed NTP client time synchronization after factory reset
| |
− | ** Fixed device time display with selected time zone
| |
− | ** Fixed MODBUS TCP indexation missing bracket issue
| |
− | ** Fixed initial MODBUS TCP request count validation
| |
− | ** Fixed PIN 3/4 direction switching over MODBUS TCP
| |
− | ** Fixed MODBUS data to MQTT socket closing issue when connection fails
| |
− | ** Fixed MODBUS alarm configuration deletion
| |
− | ** Fixed DNP3 master not working after FW upgrade with 'keep settings'
| |
− | ** Fixed DNP outstation not returning error messages
| |
− | ** Added missing SNMP objects: mobile IP, data sent/received today
| |
− | ** Fixed MQTT Publisher 'Remote address' field validation
| |
− | ** Fixed long interface name support for Azure IoT Hub
| |
− | ** Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
| |
− | ** Fixed missing sent/received data issue
| |
− | ** Fixed URL input field length validation
| |
− | ** Fixed admin login issue after upload of backup from a device with older firmware versions
| |
− | ** Fixed MAC address formatting in Events reporting messages
| |
− | ** Fixed Events reporting DHCP lease message spam, when no new lease is added
| |
− | ** Fixed logging crashing after downloading Troubleshoot file
| |
− | ** Made Wake on LAN visible only on devices with Ethernet ports
| |
− | ** Fixed Traffic log file transfer to FTP server
| |
− | ** Fixed Web Filter service reloading after a host list file is uploaded
| |
− | ** Fixed access denied messages when sending JSON-RPC requests from root user
| |
− | ** Fixed error message display about duplicated intervals in Profile scheduler
| |
− | ** Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
| |
− | ** Corrected OSPF Routing card values, value positions and names
| |
− | ** Fixed global secret instances not being removed when there are no IPsec instances
| |
− | ** Fixed uploaded file remove icon not staying in position on hover
| |
− | ** Fixed Overview card collapse issue that made it unresponsive after too many clicks
| |
− | ** Removed WAN6 interface from the Overview page
| |
− | ** Fixed mobile IPv6 display in Events Reporting status messages
| |
− | ** Fixed Bridge mode when DNS2 is not available
| |
− | ** Fixed PAP/CHAP username and password fields not saving in interface edit window
| |
− | ** Fixed sending email without secure connection for providers that support such an option
| |
− | ** Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
| |
− | ** Fixed Call Utilities Events Log message for reboot rule
| |
− | ** Fixed SMS command validation for no-authorization option
| |
− | ** Fixed MODBUS SMS alarms 'Enable' option saving
| |
− | ** Fixed running RMS with no SIM card inserted issue
| |
− | ** Fixed firmware available on server version checking issue
| |
− | ** Fixed CVE-2020-15078 openvpn vulnerability
| |
− | ** Fixed storage calculation for packages
| |
− | ** SMS Utilities: enhanced service security
| |
− | ** Fixed firmware deletion after leaving the page
| |
− | ** Fixed setup wizard redirect after LAN IP change
| |
− | ** Fixed various validation bugs, typos, option hints & alignments
| |
− | ** Fixed multiple IPv6 configuration field validations
| |
− | ** Fixed PDP logging for Verizon operator
| |
− | ** Added multiwan support for Wireguard default route
| |
− | ** Fixed wireless signal strength display when no clients are connected
| |
− | ** Fixed loss of connectivity for clients when router is in STA+AP mode
| |
− | ** Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
| |
− | ** Fixed Wifi Scanner data not being stored in certain scenarios
| |
− | ** Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
| |
− | ** Fixed Hotspot user group limit not resetting on specified time
| |
− | ** Removed an RMS error message when no Hotspot users were created
| |
− | ** Fixed Hotspot landing page image upload issue
| |
− | ** Fixed relay output value display in I/O Juggler condition page
| |
− | ** Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
| |
− | ** Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
| |
− | ** Fixed I/O Juggler's incorrect I/O status messages
| |
− | ** Fixed APN migration if APN was selected from APN list on legacy firmware
| |
− | ** Fixed RIP configuration migration from legacy firmware versions
| |
− | ** Fixed Wireguard interface status setting migration from legacy firmware versions
| |
− | ** Fixed default config options for SSH and Web access SMS Utilities rules
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.01.4_WEBUI.bin|RUT2_R_00.07.01.4]]</b> | 2022.02.25===
| |
− |
| |
− | * <b>Improvements</b>
| |
− | ** Increased Port Forwards rule max name length
| |
− | ** Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler
| |
− |
| |
− | * <b>Fixes</b>
| |
− | ** Added missing bracket to the end of MODBUS messages
| |
− | ** Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
| |
− | ** Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
| |
− | ** Fixed firewall extra option validation
| |
− | ** Fixed Hotspot enable button validation
| |
− | ** Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page
| |
− | ** Changed the logic of uploading files to the modem
| |
− | ** Fixed second mobile interface creation issue
| |
− | ** Fixed usage of custom headers in I/O Juggler HTTP action
| |
− | ** Fixed 'verify' option parsing for I/O Juggler
| |
− | ** Fixed OpenVPN server configuration with password authentication
| |
− | ** Fixed NTP interval length validation
| |
− | ** Fixed network interface enable after Drag & Drop
| |
− | ** Updated NTP client interval to 24h
| |
− | ** Fixed connection to whitelist carriers
| |
− | ** Fixed Passthrough mode when DHCP is disabled
| |
− | ** Fixed 'Deny data roaming' feature
| |
− | ** Fixed mobile blocking dependency on region
| |
− | ** Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled
| |
− |
| |
− | ===<b>[[Media:RUT2_R_00.07.01.2_WEBUI.bin|RUT2_R_00.07.01.2]]</b> | 2022.01.04===
| |
− |
| |
− | * <b>New features</b>
| |
− | ** DFOTA modem upgrade system for Quectel modems
| |
− |
| |
− | * <b>Improvements</b>
| |
− | ** Removed L2TP section title prefixes
| |
− | {{#ifeq: {{{name}}} | RUT240 | ** Added necessary/forced module firmware updates to handle AT&T network update |}}
| |
− | * <b>Fixes</b>
| |
− | ** Fixed IPSec crashing issue using mobile
| |
− | ** Fixed FW flashing when chip is in unknown state
| |
− | ** Fixed CPU usage percentage display in the Overview page
| |
− | ** Fixed FOTA timeout issue when server does not respond
| |
− | ** Fixed installation of backup packages
| |
− | ** Fixed mobile data limit display after profile change
| |
− | ** Fixed Bridge mode without multi-APN
| |
− | ** Fixed multi mobile interface checking
| |
− | ** Fixed error handling when the modem is not responding
| |
− | ** Prolonged autoconnect setting timeout
| |
− |
| |
− | ==='''RUT2_R_00.07.01''' | 2021.11.18===
| |
− | <b>Note:</b> Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.
| |
− | ----
| |
− | * <b>New features</b>
| |
− | ** RUTOS WebUI
| |