RUT230 Firmware Downloads (legacy WebUI)

From Teltonika Networks Wiki
Main Page > RUT Routers > RUT230 > RUT230 Firmware Downloads (legacy WebUI)

FW downloads

This page contains various firmware versions for RUT2XX devices.

Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.

Firmware Version Changelog
Latest FW RUT2XX_R_00.01.14.7 2023.05.19

FW checksums

A list of firmware checksums for RUT2XX firmwares uploaded in this page: checksum list

Notes

  • To successfully upgrade RUT230 from Legacy firmware (RUT2XX_R_00.01.14.1 and below) to RUTOS (RUT2_R_00.07.01 and up), you must first upgrade to the latest Legacy firmware (RUT2XX_R_00.01.14.3 and up) and then upgrade to latest RUTOS firmware. For example:
    • It is not possible to upgrade from RUT2XX_R_00.01.14 to RUT2_R_00.07.01 and vice-versa;
    • It is possible to upgrade from RUT2XX_R_00.01.14 to RUT2XX_R_00.01.14.4 first, then to RUT2_R_00.07.01 and vice-versa.


Changelog

RUT2XX_R_00.01.14.7 | 2023.05.19

  • Fixes:
    • Fixed CVE-2023-32349 vulnerability

RUT2XX_R_00.01.14.6 | 2022.08.03

  • Fixes:
    • Enhanced SMS Utilities service security

RUT2XX_R_00.01.14.5 | 2021.12.09

  • New features:
    • DFOTA modem upgrade system for Quectel modems
  • Fixes:
    • Fixed mobile MTU setting
    • Fixed incorrect QMI calls to modem
    • Increased buffer size for AT+CGDCONT output
    • Fixed persistence of DMZ firewall rules when loading Firewall General page

RUT2XX_R_00.01.14.4 | 2021.10.11

  • New features:
    • Added MeigLink SLM750-VAU support
    • Added ping to DNS feature for mobile
  • Fixes:
    • Patched CVE-2021-33909 vulnerability
    • Patched CVE-2019-14834 vulnerability
    • Patched CVE-2021-37600 vulnerability
    • Fixed VoLTE configuration for EC25-V modules
    • Fixed seting band issues
    • Fixed RMS rscp, ecio, rsrp, sinr and rsrq values

RUT2XX_R_00.01.14.3 | 2021.08.17

  • New features:
    • Added MeigLink SLM750-VSA and SLM750-VJ support
    • Added MeigLink SLM750-VJ manual frequency band selection
    • Added MQTT Modbus Gateway keep alive option
  • Improvements:
    • Added conntrack flush after IPsec connection
  • Fixes:
    • Fixed hardware information config corruption when applying backup
    • Fixed backup archive validation
    • Fixed redirecting to correct IP address after firmware upgrade with keep settings
    • Fixed Modbus Master Alarms enabling

RUT2XX_R_00.01.14.1 | 2021.07.02

  • New features:
    • MeigLink SLM750 Australian module support
  • Improvements:
    • Added CallFailed error handling
    • Updated APN database with OTA BELL ME operator APN
    • Added Client ID option to Data to Server
    • Added band selection support for Meiglink SLM750
    • Added band parsing to mobile library
    • OpenSSL updated to version 1.1.1k
  • Fixes:
    • Fixed signal strength LED handling for Meiglink modems
    • Fixed backup generating without packages
    • Fixed service mode handling for Meiglink SLM750 modems
    • Fixed band handling when switching service modes
    • Fixed SMS storage swap to modem when connection type changed from QMI to PPP
    • Fixed IPsec Passthrough function handling
    • Fixed Package Manager package install crash on reboot
    • Fixed modem FW version show for Meiglink SLM750
    • Restored no-ip.com, nsupdate and cloudfire.com-v4 DDNS configurations
    • Fixed DDNS hostname, username and password fields not showing when custom service is chosen
    • Fixed IPSec Pre-shared key option validation
    • Added security Wireless fixes for the FragAttacks vulnerabilities

RUT2XX_R_00.01.14 | 2021.03.23

  • New features:
    • PPPoE wired WAN
    • WiFi Multiple AP configuration page
  • Improvements:
    • Added SHA1 HMAC hash support to dropbear (SSH server/client)
    • Updated libpcap to version 19.1
    • Updated sqlite3 to version 3.33
    • Updated curl to version 7.74
    • Updated ncurses to version 6.2
    • Updated pcre to version 8.44
    • Updated iptables to version 1.6.2
    • Added hard request, alarm and slave limits to MODBUS TCP Master
    • Added USB ZLP flag to avoid mobile network loss
    • Added new gsmctl command that returns operator names
    • Added check for newline symbol at the end of an uploaded OpenVPN config file; if newline is not found, it is added automatically
  • Fixes:
    • Fixed CVE-2019-9755
    • Fixed CVE-2018-16789
    • Fixed CVE-2020-12762
    • Fixed CVE-2021-22161 (updated odhcp6c and netifd to fix IPv6 routing loop on point-to-point links)
    • Fixed revision buffer size for Operator Control
    • Fixed operator selection logic
    • Fixed default PPTP route option handling
    • Fixed display of DDNS Hostname, Username and Password options when custom service is selected
    • Fixed incorrect VLAN ID range
    • Fixed IPsec start after reboot issue
    • Fixed IPsec cache issues
    • Fixed firewall rule execution when QoS is not enabled
    • Fixed ZeroTier crashing issues
    • Fixed Events Log Reporting sending email with attached file
    • Fixed unexpected Package Manager crash while installing unsupported packages
    • Fixed static mobile routes after modem restart
    • Fixed routing issue with mobile PPP connection type
    • Fixed double entries after firmware upgrade with keep settings on Output Scheduler
    • Fixed Hotspot freeze on launch with certain config bug
    • Fixed wireless device frequency and channel display in wireless widget
    • Fixed typo from 'Start IP address' to 'End IP address' under DHCP server configuration

RUT2XX_R_00.01.13.3 | 2021.01.26

  • Fixes:
    • Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
    • Fixed SSH reachable over SIM IP in early boot

RUT2XX_R_00.01.13.2 | 2021.01.12

  • Fixes:
    • Added openvpn patch to fix CVE-2020-11810
    • Updated openssl to version 1.1.1i
    • Added dnsmasq patch for CVE-2019-14834
    • Added strongswan patch to fix CVE-2018-10811
    • Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
    • Updated uci to version 2019-09-01
    • Fixed setting APN and toggling Auto-APN on/off via SMS Utilities
    • Fixed factory reset on button that wouldn't perform a complete settings wipe

RUT2XX_R_00.01.13.1 | 2020.11.19

  • Fixes:
    • Randomized the global rate limiter to mitigate "SAD DNS" attack

RUT2XX_R_00.01.13 | 2020.10.23

  • New features:
    • IPsec Xauth
    • IPsec Passthrough
  • Improvements:
    • Added Input/Output default chain policy selections for firewall zones
    • Removed IPv6 related options from Setup Wizard
    • Improved WebUI page loading speed
    • Added a possibility to set MQTT credentials for Modbus Data Sender
    • Added options to keep connection open for Modbus TCP Slave
    • Added TLS certificate options to HTTP(S) data sending for Modbus data
    • Added the option to send SMS messages to multiple numbers on Modbus Alarms
    • Added IPsec aggressive host enable option
    • Expanded IPSec identifier validation
    • Added WiFi SSID field validation
    • Changed IP leasing sequence in mobile Passthrough mode
    • Added SHA512 support
    • Added MD5 & SHA256 checksum calculation for Configuration Backup files
    • Added uploaded package signature verification to Package Manager
    • Added new program that sends and reads GRE Tunnel 'keep alive' packets
    • Changed default WAN Failover values
    • Simplified key combination for opening a new CLI tab
  • Fixes:
    • Fixed Modbus MQTT Gateway not responding when connection with broker restarts
    • Fixed Modbus MQTT Gateway not responding when topics gave special characters
    • Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
    • Fixed configuration field validations in the Modbus MQTT gateway page
    • Fixed MQTT topic validation in Modbus pages
    • Fixed configuration field validations in the ThingWorx page
    • Fixed Periodic Output Control table layout
    • Fixed security related issues to file uploading and HTTP headers
    • Fixed adding new L2TP and PPTP instances on non-English WebUI
    • Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
    • Fixed WiFi SSID string handling in fix_sta_ap.sh
    • Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
    • Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
    • Fixed table design in the System → Administration → Access Control → Safety page
    • Fixed not setting iptables rules for mobile interface
    • Fixed saving APN after firmware upgrade
    • Fixed default mobile MTU setting
    • Fixed access to LAN page when mobile Bridge mode is enabled
    • SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
    • Removed IPv6 Subprefix Hint field from the Network → LAN page
    • Fixed DNS push from OpenVPN server
    • Fixed L2TP over IPsec with Android 10
    • Removed crt_rms deprecated service
    • Fixed RMS collecting data usage
    • Fixed mobile status error for Load Balancing
    • Fixed WAN MAC address value in SMS Utilities command response
    • Fixed answer delay for Call Utilities commands
    • Fixed key combination not working
    • Removed Wireguard from the Network → Status page when this package is not installed
    • Changed SNMP RX, TX object types to uint64

RUT2XX_R_00.01.12.3 | 2020.06.15

  • Improvements:
    • Improved RMS connection establishment

RUT2XX_R_00.01.12.2 | 2020.05.08

  • Fixes:
    • Fixed Verizon operator APN configuration

RUT2XX_R_00.01.12.1 | 2020.04.09

  • Fixes:
    • Fixed AT&T operator APN

RUT2XX_R_00.01.12 | 2020.03.24

  • New features:
    • Added sms remote configuration option
    • Added "Enable HTTPS" option in "Access Control" page
    • Added network frequency band select support for EG25-G modem
    • Added additional service mode options to setup wizard
    • Added Japanese language support
    • Added TLS support to MQTT publisher
    • Added mqtt subscriber support
    • MQTT-Modbus gateway: add MQTT-Modbus gateway support
    • Added ability to install packages stored in backup file
    • Full Unicode SMS support
    • Added time sync from operator station
    • Added ntpclient failover to operator station sync
  • Improvements:
    • Removed wep encryption from WiFi settings
    • Added profile scheduler and default configuration profile
  • Fixes:
    • Fixed TR-069 wan type value
    • removed GRE tunnel option in Events reporting
    • Removed config update from server option
    • Fixed to display the same units of download and upload speeds in the Hotspot settings.
    • Fixed not showing Hotspot users upload/download statistics
    • Added ability to write hyphens to static lease hostname.
    • Fixed RAM usage display
    • Fixed password change URL after firstboot
    • Removed change password error message after firstboot
    • Fixed Web access Control via SMS Utilities
    • Fxed signal strength logging and reporting

RUT2XX_R_00.01.11.3 | 2019.12.04

  • Fixes:
    • Fixed RMS not displaying data when using WiFi
    • Fixed RMS not displaying WAN IP with WAN failover

RUT2XX_R_00.01.11.2 | 2019.11.12

  • Fixes:
    • TR-069 WAN type value fix
    • RMS batch number instead of product code bug fix
    • Added missing HMAC options and PKCS12 support to OpenVPN

RUT2XX_R_00.01.11.1 | 2019.10.21

  • New features:
    • Auto APN
    • SMS Utilities Auto APN toggling
    • Operators control & support for JioAPN
    • Package Manager
    • RMS wireless monitoring
    • Port based VLAN configuration
    • I/O power socket pinout image
    • VRRP advertisement interval option
  • Improvements:
    • UPnP updated to version 2.1
    • SIM switching optimizations
    • Faster SSH private key generation on first boot
    • Added network, serving and neighbor cell information to Troubleshoot files
  • Fixes:
    • Wget Reboot minimal interval for action 'reboot' added
    • Ping Reboot packet size 0 fix
    • Modbus WebUI fixes
    • Modbus WiFi/Mobile on/off fix
    • SMS Utilities table validation fix
    • SMS Utilities UCI API fixes
    • SMS Utilities SMS response status fix
    • SMS-Utilities WiFi/Mobile on/off fix
    • Clarified WebUI options for SMS Forwarding
    • Hotspot Statistics tab shows incorrect information fix
    • Hotspot session name validation fix
    • Hotspot landing page file upload limits increased
    • Fixed MAC address clone configuration
    • Fixed sessions table dependency on authentication mode
    • Events log network type logging on modem service restart fix
    • Events Reporting typos that prevented rules being matched fixes
    • WAN Failover option disappearing after language change fix
    • Removed unnecessary fix_sta_ap.sh from syslog messages
    • Removed OpenVPN converting names to hex
    • Added file upload limits
    • DDNS name validation fix
    • Hostname and router name after backup upload fix
    • Mobile Data Limit firewall rule init fix
    • Added missing password validation
    • Fixed default VRRP config to follow RFC 2338
    • Changed packages names in Package Manager
    • Input/Output label & functionality fixes
    • FOTA memory calculation fix
    • Removed "Site Survey" page

RUT2XX_R_00.01.10 | 2019.07.12

  • New features:
    • New flash validation added
  • Improvements
    • Added reply after mobileon and mobileoff SMS Utilities commands
  • Fixes:
    • Firmware upgrade with keep settings fix
    • PPTP fix when upgrading firmware with keep settings
    • Do not autocomplete non-system passwords fix
    • Added validation for 'Service mode' change
    • VRRP template fix
    • Added validation for user group number format
    • SMS Gateway: removed new line add after configuration save
    • Added validation to prevent shell command execution via 'name' field in Wake on LAN
    • NTP time zone options fix
    • MQTT bridge with SSL/TLS connection fix
    • 'Use DNS servers advertised by peer' does not save fix
    • 'FW update available' fix
    • WAN state and IP print fixes

RUT2XX_R_00.01.07.1 | 2019.06.10

  • Fixes:
    • Increased RMS HTTP Proxy resource limit

RUT2XX_R_00.01.07 | 2019.05.31

  • New features:
    • SNMP: Individual port status added
    • openssl: update to version 1.0.2r
    • dropbear: update to version 2019.78
    • busybox: update to version 1.30.1
    • uci: update to version 2018-08-11
    • ubus: update to version 2018-10-06
    • ubox: update to version 2019-04-07
    • libubox: update to version 2019-02-27
    • MQTT: added MQTT support
    • WebUI: add additional band support for EC25
    • UPnP: UPnP added
    • WebUI: add events reporting and reporting configuration support
    • Flash: Add XT25F128B flash support
    • Strongswan: Custom option added
    • WebUI: upload backup from lower firmware version support
  • Fixes:
    • Wireless: Station availability when two or more Access Points are created fix
    • Mobile Graphs: Color and line adjustments
    • WebUI: Overview->Network->Topology: WAN Failover redirection fix
    • Strongswan: Shared-keys fix
    • WebUI: fix input validation issues
    • Mobile traffic: graph fixes
    • WebUI: fix LEDs Indication setting
    • QMI2: set 1st context to IPv4
    • Hotspot: Restrict internet access fix
    • Hotspot: 'Invalid' prompt after deleting session fix
    • IPSec: No shared key validation added
    • Email-to-SMS: longer SMS fix
    • IPSec: Allow WebUI access with HTTPS fix
    • RMS: fixed disable on sysupgrade with keep settings
    • WebUI: LEDs Indication hint text fix
    • IPSec: Fixed NAT rules application for IPsec traffic from WEB interface
    • SMS-Utils: '00XXX' and '+XXX' synonymous numbers fix
    • Wireless: Regulatory domain and channel change fix
    • SMS-Management: Error message after successful SMS send fix
    • Services: SNMP Trap redirection fix
    • Periodic Control: Rule addition in Chromium fix
    • Setup Wizard: Dialing number disappearing fix
    • WAN: After interface edit, redirect back to main WAN window fix
    • SNMP: Teltonika MIB file fix
    • rms_mqtt: HTTPs proxy fix
    • rms_json: Fixed WAN State and WAN IP
    • Wireless: STA connection loss fix
    • QoS: Speed limitation fix
    • Stunnel: Removed unnecessay WebUI options, added validation.
    • Port Scan Prevention: Disable fix
    • Port Scan Prevention: Warning message for remote access added
    • ledman: fixed led issue when there is no connection
    • ledman: fixed led issue when rebooting router with reset button
    • Wireless: Channel frequency dispaly fix
    • Administration: RMS 'infobox' fix
    • Setup Wizard: RMS 'infobox' fix
    • Setup Wizard: Validation and redirection fixes
    • VRRP: updated to 1.15 version
    • LAN: Static leases fix
    • Backup: Redirection to 127.0.0.1 after backup load fix
    • Network: 'Use WAN as LAN' availability fix
    • WebUI: WAN as LAN when using main WAN WIFI fix
    • Network: Delete static protocol options after change to DHCP fix
    • L2TP and PPTP: updated services

RUT2XX_R_00.01.06.1 | 2019.03.18

  • New features:
    • Added 'More' SMS Utilities rule
  • Fixes:
    • RMS reconnect issue fix
    • Hotspot authentication mode change fix
    • Overview widget fixes
    • Connection uptime widget fix
    • SMS Management inbox read fix
    • Wireless scan fix
    • SSTP service update
    • SMS-Utilities: various functionality fixes
    • Restore-Point: Removed the ability to load restore points of a different router
    • VLAN: LAN Network configuration backup fix
    • Maximum length SMS message send fix
    • Long SMS messages stretch out WebUI fix
    • Ping Reboot: reboots after service is disabled fix
    • Removed warning message when scanning for WiFi STA
    • Setup Wizard WiFi channel select custom option remove fix
    • Call Utilities: double zero in front of the number fix
    • Setup Wizard: you cannot procceed with setup if you disable DHCP fix
    • Restore to default percentage counting fix
    • WoL: Use WAN as LAN fix
    • Network Operators: Typo fix
    • Events log: Typo fixes
    • Hotspot Statistics: WebUI shows WiFi AP's and STA when they are not a hotspot fix
    • Hotspot: configuration saves without advertisement address fix
    • WiFi channel frequency display fix
    • Mobile Traffic: daily statistics show wrong time fix
    • STunnel text display fix
    • IPSec text display fix
    • OpenVPN remove TLS clients in TAP mode fix
    • Hotspot: Tab placement fix
    • Overview: Text changes
    • SMS-Utilities: 'uci show' fix
    • WebUI: added connection band info to mobile status page
    • Mobile: fix for LTE band default value for different regions
    • RMS: fixed logread messages
    • I/O: fixed output state labels

RUT2XX_R_00.01.05.1 | 2019.02.22

  • New features:
    • Added Wake on LAN functionality
    • Added Wake on LAN SMS Utilities rule
    • Added STunnel feature to VPN services
  • Improvements:
    • Added every WAN interface selection to Qos
    • Add modem restart option to Periodic Reboot
    • Updated curl to version 7.64.0
    • Updated OpenSSL to version 1.0.2q
  • Fixes:
    • L2TP network restart after connection loss fix
    • OpenVPN service restart when TLS-Password is changed fix
    • Mobile IP and gateway fix
    • Overview OpenVPN widget display fix
    • IPSec psk_key save after older firmware upgrade fix
    • Configuration backup and firmware upgrade stuck on the 'downloading' page fix
    • SNMP memory leak fix
    • Mobile data limit keep limit after firmware upgrade with keep settings fix
    • Remote access information fix
    • L2TP IP range change fix
    • Setup Wizard → LAN DHCP fields not hidden when DHCP is unchecked fix
    • Hotspot firewall rules fix
    • Data-only SIM fix
    • Wireless Station and Access Point fixes
    • Deleted unnecessary IPsec keep alive option
    • Fixed GRE Tunnel connection
    • Removed NOTRACK target from firewall rules
    • WAN IP not showing on Login page fix
    • DDNS process kill fix
    • WAN selected as LAN fix
    • IPSec restart when backup mobile fails fix
    • RMS memory usage fix
    • CLI Connect button fix
    • Mobile traffic counter resetting fix
    • Multiple OpenVPN related fixes
    • Ping Reboot fix

RUT2XX_R_00.01.04.2 | 2018.12.20

  • Fixes:
    • SSH security fix
    • Mobile page fix

RUT2XX_R_00.01.04.1 | 2018.11.15

  • New features:
    • Added NTP server, force servers option for ntpclient
    • Added selectable network band support
    • Added SSTP
    • Replace bird routing package with quagga package
    • Added WiFi MAC Filter address range support
    • Changed RMS communication protocol to use MQTT instead of OpenVPN
    • Enabled SSH diffie-hellman-group14-sha1 key exchange algorithm
  • Improvements
    • Updated mobile operator database
    • Enabled Wired (Main) + Mobile (Failover) multiwan in default configuration
    • Sensitive information (usernames and passwords) removed from router's Troubleshoot file
    • Added warnings to Call Utilities when on 4G-only mode
  • Fixes:
    • Fixed multiwan restart sequence issues causing VPN instabilities
    • Static Routes fix
    • WiFi updates and security fixes
    • Minor improvements and bug fixes for operator selection
    • SNMP MIB values and file format fix
    • SNMP Hotspot and serial values fix
    • Redirect to login page after factory reset fix
    • IPsec init script fix
    • Overview WiFi widget fix
    • Modbus WiFi enable/disable fix
    • Modbus APN write and memory leak fixes
    • JavaScript code multiplication fix
    • DHCP server lease time validation update fix
    • Hang up on watchdog reset fix
    • Overview mobile WAN IP display fix
    • curl: update to 7.62.0
    • OpenSSL: update to 1.0.2p
    • cacert: update to 2018-10-17
    • arptables segmentation fault fix
    • quectel-CM: updated to latest version
    • GRE Tunnel delete after button press fix
    • Update Teltonika contact address in Licenses page
    • Disabled passthrough and bridge selection when multiwan is enabled
    • Fixed lua dispatcher error after reboot
    • Fixed multiwan metrics and priorities
    • SMS Utilities SMS status WAN IP with multiwan fix

RUT2XX_R_00.01.03.5 | 2018.10.23

  • Fixes:
    • VPN shutdown at delete fix
    • PPTP default gateway set and delete fix
    • OpenVPN status fix
    • OpenVPN configuration section name compatibility fix
    • IPsec redirect after save fix
    • Overview VRRP widget status fix
    • Hotspot start after reboot fix
    • Added default LAN IPv6 address
    • Overview WAN wiki link fix
    • Hotspot overview fix
    • Mobile data counter reset fix

RUT2XX_R_00.01.03.2 | 2018.09.05

  • New features:
    • Added operators control with white/black list feature
    • Added Administration -> Root CA page
  • Improvements:
    • Added many security updates
    • Added firmware update information
    • Added CellID information to Troubleshoot file
  • Fixes:
    • GPL: compilation fixes
    • Configuration restore fix
    • Disabled Hotspot users' ability to reach LAN devices and WebUI
    • Port Forwarding IP validation fix
    • System -> Administration -> Overview page loading fix when VPN configuration exists
    • Some minor DHCP display fixes
    • Call Utilities reboot action partial message fix
    • DDNS IP source change and added time selection
    • OpenVPN service fixes
    • Some minor QoS fixes
    • Some minor OpenVPN fixes
    • Configuration Wizard: LAN page redirect fix
    • Overview WAN IP fix
    • Added Redirect to HTTPS information
    • Troubleshoot TCPdump fix
    • Changed 'Backup WAN' to 'WAN Failover'
    • WebUI: language translation in some pages fix
    • Hotspot: SMS OTP authentication fix (Mantis ID: 0022367)
    • Overview VPN widget IP fix

RUT2XX_R_00.01.02.6 | 2018.08.22

  • Fixes:
    • Fixed GPL Readme
    • Fixed JavaScript password validation

RUT2XX_R_00.01.02.3 | 2018.06.08

  • Fixes:
    • Fixed RMS status in overview page
    • Fixed LTE signal strength graph

RUT2XX_R_00.01.01.4 | 2018.05.16

  • New features:
    • Added DHCP Force option
    • Added RMS connection page to Setup Wizard
    • Added forced password change
  • Improvements:
    • Updated Overview widget icons, added Teltonika Wiki links
    • Added private key decryption function to OpenVPN client configuration
    • Added additional DPD options
  • Fixes:
    • Fixed Wget reboot URL datatype
    • WebUI: SSH access status fix
    • Added special symbols exception to SMS-Forwarding
    • Added missing Events Reporting config for SMS-Utilities
    • PPP enable/disable bug fix
    • Multiple Call Utilities fixes
    • SMS event queries fix
    • Removed unnecessary sim_switch message text
    • Some SSH security fixes
    • Updated Modbus sources and coding table
    • Multiple OpenVPN bug fixes
    • Graphs/Signal strength fix when using HSDPA+HSUPA network type
    • Fixed VLAN DHCP leasing
    • Administration password change fix
    • STA mode logic changed
    • Hotspot bandwith limit fix
    • Moved IP alias gateway to advanced features
    • Administration -> Overview fix
    • Factory reset fix due to mobile connection problems

RUT2XX_R_00.01.00 | 2018.03.19

  • Improvements:
    • Added hostname validation for Wget Reboot
    • New versioning logic
  • Fixes:
    • Output ON/OFF fix
    • Firmware Upgrade fix
    • SSH authentication logging fix

RUT2XX_R_00.00.553 | 2018.03.09

  • New features:
    • Added Redirect LAN to GRE function
  • Fixes:
    • Mobile Data Limit fixes
    • User's password removed from users table
    • Firmware upgrade message fixed

RUT2XX_R_00.00.539 | 2018.03.01

  • Fixes:
    • Minor Openvpn functionality fixes

RUT2XX_R_00.00.486 | 2018.02.27

  • New features:
    • Added two additional fields to Hotspot Landing Page link configuration (SMS have password, SMS no password )

RUT2XX_R_00.00.482 | 2018.02.22

  • Fixes:
    • Updated SMS send satus
    • Added Modbus enable check-box
    • Added firewall rule so the router would be reachable from WAN when access control is enabled

RUT2XX_R_00.00.474 | 2018.02.20

  • Improvements:
    • Added download MIBS button to SNMP page
  • Fixes:
    • Fixed style for VPN service pages, Modbus page

RUT2XX_R_00.00.388 | 2018.02.19

  • New features:
    • Added Relayd function that can make the router act like a wireless range extender

RUT2XX_R_00.00.382 | 2018.02.06

  • Fixes:
    • Fixed Wi-Fi logging to FTP function
    • Fixed site blocking file parsing
    • System Information texts fix

RUT2XX_R_00.00.377 | 2018.01.31

  • New features:
    • IPsec: added Transport mode, Firewall options, local IP management options
  • Improvements:
    • Moved Disable NAT flags from VPN to Firewall page
  • Fixes:
    • Fixed Firewall config for hotspot interface assignment
    • DMZ rule position fix

RUT2XX_R_00.00.372 | 2018.01.16

  • Improvements:
    • Added binero.se to DDNS service providers list
    • Added some additional SMS Utilities hints
    • Added support for changing Wireless SSID name from branding script
    • Improved Email to SMS function
  • Fixes:
    • WAN port status display fix
    • Fixed SMS Utilities Write to config bug when sending mobileoff message
    • Whitelist blocking fix in Site Blocking

RUT2XX_R_00.00.355 | 2018.01.05

  • New features:
    • Added WPA-Enterprise encryption type support for Wi-Fi Access Points
    • Added Email To SMS, SMS Forwarding functions
    • Added Wget Reboot function
  • Improvements:
    • Updated fw upgrade validation for future firmwares
  • Fixes:
    • Fixed bug of not being able to use hostnames as a destination for Ping Reboot
    • Input/Output Scheduler backup bug fix
    • System->Administration page style fixes
    • Removed wifid due to security issues
    • Configuration Backup bug fixes

RUT2XX_R_00.00.339 | 2018.01.02

  • New features:
    • Added IPsec option for WebUI access through tunnel
    • Added Reset button custom hold time configuration
  • Fixes:
    • Minor Mobile Data Limit bug fix
    • Renamed mibs file to TLT-MIB.txt
    • Temperature display fix
    • Added Async Control Character Maps
    • Fixed minor grammatical errors in the WebUI
    • OpenVPN hints fix

RUT2XX_R_00.00.312 | 2017.12.08

  • Fixes:
    • Some minor PPTP Server and Client functionality fixes
    • Added fix to PPP Connection Type due to disconnecting mobile connection
    • Real traffic fix

RUT2XX_R_00.00.307 | 2017.12.05

  • New features:
    • Added Hotspot configuration profiles
  • Improvements:
    • Added custom redirect address
    • Added troubleshoot file download protection
  • Fixes:
    • Some minor Hotspot functionality fixes
    • Mobile data logging fix
    • Some minor Dynamic DNS functionality fixes

RUT2XX_R_00.00.296 | 2017.11.23

  • Improvements:
    • SMS Utilities fw_upgrade rule now works with Keep Settings
  • Fixes:
    • Minor Reregister function fix
    • Use IPv4 only fix
    • Minor mobile interface fix
    • Some minor Site Blocking fixes
    • Connect to hidden WiFi AP fix
    • Multiwan metric change fix for RUT230

RUT2XX_R_00.00.284 | 2017.11.03

  • Improvements:
    • Improved Mobile Data Limit functionality
    • Improved Load Balancing functionality