Difference between revisions of "Serial Interface Control Commands TRM250"
| (2 intermediate revisions by one other user not shown) | |||
| Line 3: | Line 3: | ||
== Serial Interface Control Commands == | == Serial Interface Control Commands == | ||
| − | |||
| − | |||
| − | |||
| − | + | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=33 '''3.1. AT&C Set DCD Function Mode - page 32'''] | |
| − | + | ||
| − | The | + | The command controls the behavior of the UE‟s DCD (data carrier detection) line. |
| + | |||
| + | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=33 '''3.2. AT&D Set DTR Function Mode - page 32'''] | ||
| + | |||
| + | The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode. | ||
| + | |||
| + | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=34 '''3.3. AT+IFC Set TE-TA Local Data Flow Control - page 33'''] | ||
| − | |||
| − | |||
The command determines the flow control behavior of the serial port. | The command determines the flow control behavior of the serial port. | ||
| − | + | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=35 '''3.4. AT+IFC Set TE-TA Control Character Framing - page 34'''] | |
| − | + | ||
The command determines the serial interface character framing format and parity received by TA from TE. | The command determines the serial interface character framing format and parity received by TA from TE. | ||
| − | + | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=36 '''3.5.AT+IPR Set TE-TA Fixed Local Rate - page 35'''] | |
| − | + | ||
| − | The commandis used to query and set the baud rate of the UART. The default baud rate value ( | + | The commandis used to query and set the baud rate of the UART. The default baud rate value (<rate>) is 115200bps. The setting of <rate>will not be restored with AT&F. |
| − | + | [https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=37 '''3.6.AT+QRIR Restore RI Behaviorto Inactive - page 36'''] | |
| − | - | ||
| − | |||
| − | + | If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior is controlled by AT+QCFG. Please refer to AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/sms incoming"and AT+QCFG="urc/ri/other"for more details. | |
Revision as of 11:06, 20 April 2020
Main Page > TRM Modems > TRM250 > TRM250 Manual > TRM250 AT Commands > Serial Interface Control Commands TRM250Serial Interface Control Commands
3.1. AT&C Set DCD Function Mode - page 32
The command controls the behavior of the UE‟s DCD (data carrier detection) line.
3.2. AT&D Set DTR Function Mode - page 32
The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode.
3.3. AT+IFC Set TE-TA Local Data Flow Control - page 33
The command determines the flow control behavior of the serial port.
3.4. AT+IFC Set TE-TA Control Character Framing - page 34
The command determines the serial interface character framing format and parity received by TA from TE.
3.5.AT+IPR Set TE-TA Fixed Local Rate - page 35
The commandis used to query and set the baud rate of the UART. The default baud rate value (<rate>) is 115200bps. The setting of <rate>will not be restored with AT&F.
3.6.AT+QRIR Restore RI Behaviorto Inactive - page 36
If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior is controlled by AT+QCFG. Please refer to AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/sms incoming"and AT+QCFG="urc/ri/other"for more details.
