Open main menu
Home
Random
Log in
Settings
COMMUNITY
ABOUT
Disclaimers
Teltonika Networks Wiki
Search
Changes
← Older edit
Newer edit →
Template:Networking device manual unmanaged switch recovery troubleshooting
(view source)
Revision as of 17:02, 24 April 2020
7 bytes removed
,
17:02, 24 April 2020
→Connected device not powered via PoE
Line 105:
Line 105:
<dd>Check if connected device supports 802.3af and/or 802.3at PoE standard(s)</dd>
<dd>Check if connected device supports 802.3af and/or 802.3at PoE standard(s)</dd>
<dt>Solution II</dt>
<dt>Solution II</dt>
−
<dd>Check if {{{name}}}
switch
is powered with PSU, which outputs 44 VDC or higher voltages and can provide at least 2 W + connected needed power</dd>
+
<dd>Check if {{{name}}} is powered with PSU, which outputs 44 VDC or higher voltages and can provide at least 2 W + connected needed power</dd>
<!--- <dt>Solution III</dt>
<!--- <dt>Solution III</dt>
<dd>If using 10/100 Mbps connection, make sure that your cable has connected all wiring pairs</dd> --->
<dd>If using 10/100 Mbps connection, make sure that your cable has connected all wiring pairs</dd> --->
Tomas.mikolaitis
Administrators
732
edits