732
edits
Changes
Template:Networking device manual unmanaged switch recovery troubleshooting (view source)
Revision as of 17:02, 24 April 2020
, 17:02, 24 April 2020→Connected device not powered via PoE
<dd>Check if connected device supports 802.3af and/or 802.3at PoE standard(s)</dd>
<dd>Check if connected device supports 802.3af and/or 802.3at PoE standard(s)</dd>
<dt>Solution II</dt>
<dt>Solution II</dt>
<dd>Check if {{{name}}} switch is powered with PSU, which outputs 44 VDC or higher voltages and can provide at least 2 W + connected needed power</dd>
<dd>Check if {{{name}}} is powered with PSU, which outputs 44 VDC or higher voltages and can provide at least 2 W + connected needed power</dd>
<!--- <dt>Solution III</dt>
<!--- <dt>Solution III</dt>
<dd>If using 10/100 Mbps connection, make sure that your cable has connected all wiring pairs</dd> --->
<dd>If using 10/100 Mbps connection, make sure that your cable has connected all wiring pairs</dd> --->