Difference between revisions of "RUT955 Relay to Open Collector Output"
From Teltonika Networks Wiki
(Created page with "This section provides an example on how to connect a relay to RUT955 open collector output: File:Connecting relay to open collector output rut955.png '''Note:''' some re...") |
(Created page with "This section provides an example on how to connect a relay to RUT955 open collector output: File:Connecting relay to open collector output rut955.png '''Note:''' some re...") |
(No difference)
|
Latest revision as of 13:14, 12 June 2020
Main Page > RUT Routers > RUT955 > RUT955 Hardware Application Examples > RUT955 Relay to Open Collector OutputThis section provides an example on how to connect a relay to RUT955 open collector output:
Note: some relays have internal protection diode D. When connecting such relay you mustn’t mix up coil contacts. If you mix up such relay coil contacts you might cause permanent damage to the open collector output.
For more information about digital output control and RUT955 Inputs/Outputs in general refer here