Changes

Open router’s WebUI, navigate to '''Services > Modbus > Modbus Serial Master''' and apply the following configuration.

Open router’s WebUI, navigate to '''Services > Modbus > Modbus Serial Master''' and apply the following configuration.

[[File:Modbus_serial_rut955_1.png|border|class=tlt-border]]

[[File:Modbus_serial_rut955_1.png|border|class=tlt-border|1100x700px]]

# Press '''Enable'''.

# Press '''Enable'''.

Now create '''RS232 slave''' by writing a name, pressing '''Add''' button. It should appear like in the example and then press '''Edit'''.

Now create '''RS232 slave''' by writing a name, pressing '''Add''' button. It should appear like in the example and then press '''Edit'''.

[[File:Modbus serial rut955 2.png|border|class=tlt-border]]

[[File:Modbus serial rut955 2.png|border|class=tlt-border|1100x700px]]

Then apply the following configuration.  

Then apply the following configuration.  

[[File:Modbus serial rut955 3.png|border|class=tlt-border]]

[[File:Modbus serial rut955 3.png|border|class=tlt-border|1100x700px]]

[[File:Modbus serial rut955 4.png|border|class=tlt-border]]

[[File:Modbus serial rut955 4.png|border|class=tlt-border|1100x700px]]

# Check '''Enable'''.

# Check '''Enable'''.