Jump to content
  • EN

Template:Networking manual Modbus serial RutOS: Difference between revisions

Template:Networking manual Modbus serial RutOS (view source)

Revision as of 15:41, 11 October 2022

7 bytes added ,  11 October 2022
→‎Slave alarms
VisualWikitext
Line 129: Line 129:
In order to setup the following configuration SIM card is required.
In order to setup the following configuration SIM card is required.


Go back to '''Services > Modbus > Modbus Serial Master''' and press edit the same Slave configuration or create a new one. There will be section called '''Slave alarms'''. Create a name, then press '''Add''' button. When it appears like in the example, press '''Edit'''.
Go back to '''Services > Modbus > Modbus Serial Master''' and press edit the same Slave configuration or create a new one. There will be section called '''Alarms Configuration''. Create a name, then press '''Add''' button. When it appears like in the example, press '''Edit'''.


[[File:Networking_rut955_configuration_modbus_serial_14_v1.png|border|class=tlt-border]]
[[File:Modbus serial rut955 12.png|border|class=tlt-border|1100x700px]]


Then apply the following configuration:
Then apply the following configuration:


[[File:Networking_rut955_configuration_modbus_serial_15_v1.png|border|class=tlt-border]]
[[File:Modbus serial rut955 13.png|border|class=tlt-border|1100x700px]]


# '''Enable''' instance.
# '''Enable''' instance.
Line 141: Line 141:
# Write '''Register''' (1).
# Write '''Register''' (1).
# Select '''Condition''' (More than).
# Select '''Condition''' (More than).
# Write '''Value''' (5).
# Write '''Value''' (10).
# Select '''Action frequency''' (First trigger)
# Select '''Action''' (SMS).
# Select '''Action''' (SMS).
# Create '''Message''' (type anything you want to receive).
# Write '''Phone number''' (the number you want to receive the messages to).
# Write '''Phone number''' (the number you want to receive the messages to).
# Create '''Message''' (type anything you want to receive).
# Press '''Save'''.
# Press '''Save'''.


Now go back to '''Modbus slave simulator''' and edit this window:
Now go back to '''Modbus slave simulator''' and edit this window:


[[File:Networking_rut955_configuration_modbus_serial_16_v1.png|border|class=tlt-border]]
[[File:Modbus serial rut955 14.png|border|class=tlt-border|1100x700px]]


Change the value to anything below 5, you should not receive messages. Then change the value to anything above 5, you should start receiving messages.
Change the value to anything below 10, you should not receive messages. Then change the value to anything above 10, you should start receiving messages.
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/96772"