Jump to content
  • EN

Template:Networking device manual device recovery: Difference between revisions

← Older edit
VisualWikitext
No edit summary
No edit summary
 
(15 intermediate revisions by 2 users not shown)
Line 8: Line 8:


<ul>
<ul>
     <li>Default Address (LAN IP): <b>192.168.{{#switch:{{{series}}}|TRB14x|TRB5|TRB16=2|#default=1}}.{{#switch:{{{series}}}|TAP200|TAP100=3|#default=1}}</b></li>
     <li>Default Address (LAN IP): <b>192.168.{{#switch:{{{series}}}|TRB14x|TRB5|TRB16|TRB501=2|#default=1}}.{{#switch:{{{series}}}|TAP200|TAP100|DAP14X=3|#default=1}}</b></li>
     <li>Default Username: <b>admin</b></li>
     <li>Default Username: <b>admin</b></li>
     <li>Default Password: {{#ifeq:{{{unique_pass}}}|1|see password on bottom of the device|<b>admin01</b> or random generated password<span class="asterisk">*</span>}}</li>
     <li>Default Password: <b>admin01</b> or random generated password (see password on bottom of the device)<span class="asterisk">*</span></li>
</ul>
</ul>
{{#ifeq:{{{unique_pass}}}|1||
 
===Devices with random password===
===Devices with random password===
----
----
Line 19: Line 19:
}}</b>
}}</b>


You can find the batch of your device on the [[{{{name}}} Product Labels|Product Labels]] sticker.
You can find the batch of your device on the [[{{{name}}} Product Labels|Product Labels]] sticker or engraving.
}}
 
==Factory reset==
==Factory reset==


Line 32: Line 32:
[[File:{{{file_reset_button}}}|{{{size_reset_button}}}px]]
[[File:{{{file_reset_button}}}|{{{size_reset_button}}}px]]


The reset button has two functions:
The reset button has two functions:{{#switch:{{{name}}}|#default =
<ul>
    <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUT301|RUTX08|RUTX10|RUTM08|RUTM10|RUT140|RUT142=|#default=Start of the reboot will be indicated by the flashing {{#switch:{{{series}}}|TAP100|TAP200|TAP400=power led.|#default=of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB1|TRB2|TRB2M|TRB16|RUT361=3|RUTX|RUTM|RUTC={{#switch:{{{name}}}|RUTX12|RUTM12|RUTM52=6|RUTX14|RUTXR1|RUTX50|RUTM50|RUTM51|RUTM54|RUTM59|RUTC50=3|#default=5}}|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}}}
    <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot. {{#ifeq:{{{sms}}}|1|{{#switch:{{{series}}}|TAP100|TAP200|TAP400=|#default=Signal strength LEDs indicate the elapsed time while holding the reset button. Start of the factory reset will be indicated by flashing of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB1|TRB2|TRB2M|TRB16|RUT361=3|RUTX|RUTM|RUTC={{#switch:{{{name}}}|RUTX12|RUTM12|RUTM52=6|RUTX14|RUTXR1|RUTX50|RUTM50|RUTM51|RUTM54|RUTM59|RUTC50=3|#default=5}}|#default=5}} signal strength LEDs.}}|}} <br><b>NOTE</b>: the default button hold time value (min time 12 seconds, max time 20 seconds) can be changed in the device WebUI, from the <b>System → Administration → [[{{{name}}}_Administration#General|General]]</b> page.</li>
</ul>
| RUTM30 | RUTM31 =
<ul>
<ul>
     <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUTX08|RUTX10=|#default=Start of the reboot will be indicated by the flashing {{#switch:{{{series}}}|TAP100=power led.|#default=of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB1|TRB2|TRB2M|TRB16|TRB14x=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}}}
     <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. Start of the reboot will be indicated by the flashing signal strength LED (Blue).</li>
     <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot. {{#ifeq:{{{sms}}}|1|{{#switch:{{{series}}}|TAP100=|#default=Signal strength LEDs indicate the elapsed time while holding the reset button. Start of the factory reset will be indicated by flashing of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB2M|TRB16|TRB1|TRB2=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs.}}|}} <br><b>NOTE</b>: the default button hold time value (min time 12 seconds, max time 20 seconds) can be changed in the {{#switch: {{{series}}}
     <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot. Start of the factory reset will be indicated by blinking signal strength LED in blue. <br><b>NOTE</b>: the default button hold time value (min time 12 seconds, max time 20 seconds) can be changed in the device WebUI, from the <b>System → Administration → [[{{{name}}}_Administration#General|General]]</b> page.</li>
| TRB14x|TRB2xx|TRB5|TRB16|TRB2M|TRB1|TRB2 = gateway
| router's}} WebUI, from the <b>System → Administration → [[{{{name}}}_Administration#General|General]]</b> page.</li>
</ul>
</ul>
}}


===WebUI===
===WebUI===
----
----


{{#switch:{{{series}}}|RUT9|RUT2=You can also perform a factory reset from the router's WebUI. To do so, login to the router and go to the Backup section found under the System tab (<b>System → Maintenance → Backup → [[{{{name}}}_Maintenance#Restore_default_settings|Restore default settings]]). In the very bottom of the page there's a <b>Restore</b> button that performs a chosen type of reset.
{{#switch:{{{series}}}|RUT9|RUT2=You can also perform a factory reset from the router's WebUI. To do so, login to the router and go to the Backup section found under the System tab (<b>System → Maintenance → [[{{{name}}}_Maintenance#Reset_Settings|Restore default settings]]). In the very bottom of the page there's a <b>Restore</b> button that performs a chosen type of reset.


[[File:Networking_rutos_manual_device_recovery_option_reset_webui.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_device_recovery_option_reset_webui.png|border|class=tlt-border]]


| #default=You can also perform a factory reset from the router's WebUI. To do so, login to the router and go to the Backup section found under the System tab (<b>System → Maintenance → Backup → [[{{{name}}}_Maintenance#Restore_default_settings|Reset settings]]</b>). In the very bottom of the page there's a <b>Reset</b> button that performs a chosen type of reset.}}
| #default=You can also perform a factory reset from the {{#switch: {{{series}}}|TRB14x|TRB2xx|TRB5|TRB16|TRB2M|TRB1|TRB2 = gateway's | TAP100|TAP200 = AP's | #default = router's}} WebUI. To do so, login to the {{#switch: {{{series}}}|TRB14x|TRB2xx|TRB5|TRB16|TRB2M|TRB1|TRB2 = gateway | TAP100|TAP200 = AP | #default = router}} and go to the Backup section found under the System tab (<b>System → Maintenance → [[{{{name}}}_Maintenance#Reset_Settings|Reset settings]]</b>). In the very bottom of the page there's a <b>Reset</b> button that performs a chosen type of reset.}}


Notice: A <b>Factory defaults</b> reset will remove all logs, SIM PIN's and RMS data that the device might have had.
Notice: A <b>Factory defaults</b> reset will remove all logs, SIM PIN's and RMS data that the device might have had.
Line 56: Line 60:
===SMS===
===SMS===
----
----
You can perform a factory reset with the SMS Utilities <b>restore</b> rule. If the rule hasn't been disabled or changed in any way, all you need to do is send an SMS message to the {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5=gateway|#default=router}} containing the text:
You can perform a factory reset with the SMS Utilities <b>restore</b> rule. If the rule hasn't been disabled or changed in any way, all you need to do is send an SMS message to the {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5|TRB2M=gateway|#default=router}} containing the text:
  {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5|TRB1|TRB2|TRB2M|TRB16=<b><gateway_password> restore</b> | #default=<b><router_password> restore</b>}}
  {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5|TRB1|TRB2|TRB2M|TRB16=<b><gateway_password> restore</b> | #default=<b><router_password> restore</b>}}


Line 65: Line 69:
You can perform a factory reset via command line by executing the <b>firstboot</b> command. After this you will be asked to confirm the reset. If you're sure, type the letter <b>y</b> and press "Enter" or type the letter <b>n</b> if you wish to cancel the reset.
You can perform a factory reset via command line by executing the <b>firstboot</b> command. After this you will be asked to confirm the reset. If you're sure, type the letter <b>y</b> and press "Enter" or type the letter <b>n</b> if you wish to cancel the reset.


If you agreed to perform a factory reset, next type in <b>reboot</b> and press "Enter". The {{#switch: {{{series}}} |TRB1xx|TRB2xx|TRB5|TRB1|TRB2|TRB2M|TRB16=gateway|#default=router}} will be reset to it's factory settings and rebooted. The entire sequence of events should look like this:
If you agreed to perform a factory reset, next type in <b>reboot</b> and press "Enter". The {{#switch: {{{series}}}|TRB14x|TRB2xx|TRB5|TRB16|TRB2M|TRB1|TRB2 = gateway | TAP100|TAP200 = AP | #default = router}} will be reset to it's factory settings and rebooted. The entire sequence of events should look like this:


{{Template: Networking_{{#ifeq:{{{series}}}|TRB14x|{{lc:{{{series}}}}}|rutxxx}}_manual_device_recovery_cli
{{Template: Networking_{{#ifeq:{{{series}}}|TRB14x|{{lc:{{{series}}}}}|rutxxx}}_manual_device_recovery_cli
Line 74: Line 78:


{{#switch:{{{series}}}
{{#switch:{{{series}}}
  | RUT8xx|TRB14x|TRB5|TRB16=
  | RUT8xx|TRB14x|TRB5|TRB16|TRB501=
  | #default={{Template: Networking_device_manual_device_recovery_bootloader|name={{{name}}}|series={{{series}}}}}
  | #default={{Template: Networking_device_manual_device_recovery_bootloader|name={{{name}}}|series={{{series}}}}}
}}
}}
Retrieved from "https://wiki.teltonika-networks.com/view/Template:Networking_device_manual_device_recovery"