RUT955 Mobile Utilities: Difference between revisions

From Teltonika Networks Wiki
No edit summary
 
(9 intermediate revisions by 4 users not shown)
Line 1: Line 1:
==Summary==
{{Template: Networking_rutos_manual_mobile_utilities_rut2_rut9
 
<!------------------------DEVICE----------------------->
RUT routers have an extensive amount of various SMS control utilities. SMS Utilities can be used to set/get configurations, monitor and issue commands to the router.
| name     = RUT955
 
| series    = RUT9
==SMS Utilities==
<!----------------------SEPARATORS--------------------->
 
| dualmodem = 0
===Execution===
| dualsim  = 1
----
| gps      = 1
To execute a rule, just send an SMS message to the router‘s SIM card number with the rule's SMS Text, e.g., if you send a message with the text '''“reboot”''', the router will reboot provided the selected Authorization method is '''“No authorization”'''. However, if there is an Authorization method present you will need to include the '''“Authorization key”''' in the text message. This '''“Authorization key”''' depends on  the chosen '''Authorization method''', i.e., if the method is '''“By serial”''', the '''“Authorization key”''' is the router’s serial number, if the method is '''“By router admin password”''', the '''“Authorization key”''' is the router’s admin password. The '''"Authorization key”''' must precede the activation text and they must be separated by a space symbol. For example, if the chosen Authorization method is '''“By router admin password”''' and the password is '''“admin01”''', the entire message should look like this: '''“admin01 reboot”'''. The same applies to '''“By serial”''' authorization.
| io        = 1
 
| wifi      = 1
Here are a few examples of how certain rules can be executed with various Authorization methods:
| 2g        = 1
| 3g        = 1
{| class="wikitable"
| 4g        = 1
|+
}}
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | COMMAND
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | AUTHORIZATIO METHOD
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | SMS TEXT
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Status
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | By router admin password
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | ROUTER_PASSWORD status
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Reboot
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | By serial
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SERIAL_NUMBER reboot
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Switch mobile data off
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | No authorization
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | mobileoff
|-
|}
 
===Default Rules===
 
The SMS Utilities section contains a list of rules that perform certain actions when they are activated by SMS messages.
 
[[Image:Services sms utils.PNG]]
 
The figure above is an illustration of the SMS Utilities rules list. The entire list contains 26 rules but you are also be provided with the possibility to configure custom ones.
 
All default configuration options are listed below:
*Reboot
*Get status
*Get I/O status
*Get OpenVPN status
*Switch WiFi on / off
*Switch mobile data on / off
*Switch OpenVPN on / off
*Change mobile data settings
*Get list of profiles
*Change profile
*SSH access control
*Web access control
*Restore to default
*Force SIM switch
*GPS coordinates
*GPS on / off
*FW upgrade from server
*Switch monitoring on / off
*Monitoring status
*UCI API
 
===Rule Overview and editing===
----
Every default SMS rule can be edited to your liking. If none of the rules suit your purposes, just click the '''Edit''' button next to any SMS Utilities rules. This section will contain information on editing every signle SMS Utilities rule.
 
====Reboot====
----
[[Image:Services sms utils reboot.PNG]]
 
Above is an example of what an '''SMS Configuration''' window looks like, specifically, '''SMS Configuration''' for the '''Reboot''' rule. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean. To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable SMS reboot function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows router restart via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Reboots the router
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''reboot'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Get status via SMS after reboot
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Check this to receive connection status via SMS after the reboot
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If checked, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule. After checking this, the '''Send status SMS to other number''' field will become available
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Send status SMS to other number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable this if you want the status message to be sent to another (other than the sender) number (s)
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, you will be prompted to enter a phone number (s)
This field appears only if you have checked '''Get status via SMS after reboot'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Message text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which status information should be included in SMS:
Data state, Operator, Connection type, Signal Strength, Connection State, IP
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | You can select which status elements to display
|-
|}
 
====Status====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable SMS status function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the '''Message text''' field
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''status'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Send status SMS to other number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable this if you want the status message to be sent to another (other than the sender) number (s)
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, you will be prompted to enter a phone number (s)
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Message text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which status information should be included in SMS:
Data state, Operator, Connection type, Signal Strength, Connection State, IP
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | You can select which status elements to display
|-
|}
 
====Get I/O status====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable SMS I/O status function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to get the router‘s I/O status via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns an SMS message containing information about the Input/Output status of the router
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''iostatus'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Send status SMS to other number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable this if you want a status message to be sent to another (other than the sender) number (s)
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, you will be prompted to enter a phone number (s)
|-
|}
 
====Get OpenVPN status====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable  the OpenVPN status function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows to get the router‘s OpenVPN status via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns an SMS message containing information about an OpenVPN instance's status
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: '''vpnstatus'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Send status SMS to other number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable this if you want a status message to be sent to another (other than the sender) number (s)
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, you will be prompted to enter a phone number (s)
|-
|}
 
====Switch WiFi On/Off====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Switch WiFi function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows Wi-Fi control via SMS.
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns WiFi ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter;
Default text: '''wifion''' to turn WiFi ON; '''wifioff''' to turn WiFi OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Write to config
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Permanently saves Wi-Fi state
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | With this setting enabled, the router will keep the new Wi-Fi state even after reboot.
If it is not selected, the router will revert the Wi-Fi state after reboot
|-
|}
 
====Switch mobile data ON/OFF====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Switch mobile data function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows mobile control via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turn mobile data ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter;
Default text: '''mobileon''' to turn mobile data ON; '''mobileoff''' to turn mobile data OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Write to config
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Permanently saves mobile network state
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | With this setting enabled, the router will keep the new mobile data state even after reboot.
If it is not selected, the router will revert the mobile data state after reboot
|-
|}
 
====Manage OpenVPN====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Manage OpenVPN function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows OpenVPN control via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns an OpenVPN instance ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default: '''vpnon''' to turn OpenVPN ON; '''vpnoff''' to turn OpenVPN OFF
 
'''After the SMS text you have to write OpenVPN instance‘s name, e.g., "vpnon client_Client1"'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
====Get list of profiles====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Get list of profiles function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to get the list of profiles via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sends you the list of existing profiles
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''profdisp'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
====Change profile====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Change profile function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows changing profiles via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Changes the current profile to the one specified in the message
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" |  SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text '''pr'''
 
'''After the SMS text you have to write the Profile's name, e.g., "pr John"'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
====SSH access Control====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the SSH access control function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows SSH access control via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns SSH access ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''ssh'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable SSH access
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables or Disables SSH access from LAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable remote SSH access
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables or Disables SSH access from WAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN
|-
|}
----
* Note that by default the ssh rule will '''enable both local and remote SSH access'''. You can change how the rule acts by clicking the "Edit" button located next to it:
 
[[File:Sms utilities ssh edit v2.png]]
----
* In the next window you can customize whether the rule will turn local/remote SSH access ON or OFF:
 
[[File:Sms utilities ssh configuration v2.png]]
----
If you are using this rule frequently, we suggest that you create a new custom rule. For example, you can use the default rule to turn SSH access ON and use the custom rule to turn SSH access OFF. You can create new SMS Utilities rules from the '''New SMS Rule''' section located at the bottom of the SMS Utilities page.
 
====Web access Control====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Web access control function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows Web access control via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns access to WebUI ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''web'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable HTTP access
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables or Disables HTTP access from LAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable remote HTTP access
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables or Disables HTTP access from WAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable remote HTTPS access
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables or Disables HTTPs access from WAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If this is checked, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN
|-
|}
----
* Note that by default the web rule will '''enable both local and remote HTTP access''' as well as '''remote HTTPS access'''. You can change how the rule acts by clicking the "Edit" button located next to it:
 
[[File:Sms utilities web edit v2.png]]
----
* In the next window you can customize whether the rule will turn local/remote HTTP/HTTPS access ON or OFF:
 
[[File:Sms utilities web configuration v2.png]]
----
If you are using this rule frequently, we suggest that you create a new custom rule. For example, you can use the default rule to turn HTTP/HTTPS access ON and use the custom rule to turn HTTP/HTTPS access OFF. You can create new SMS Utilities rules from the '''New SMS Rule''' section located at the bottom of the SMS Utilities page.
 
====Restore to default====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Restore to default function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to restore the router to its default settings via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Executes a router Reset, which means the router will reboot after this rule is executed and all custom configurations will be deleted and restored to default
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''restore'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
====Force SIM switch====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Force SIM switch function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows SIM switch via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Forces the router to switch to the other SIM card(the one that is not in use at the moment of receiving the message)
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''switch_sim'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
====GPS Coordinates====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the GPS coordinates function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to get GPS coordinates via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sends you GPS coordinates of the router
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''gps'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
====GPS ON/OFF====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the GPS ON/OFF function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to control GPS via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns GPS ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''gpson''' to turn GPS ON; '''gpsoff''' to turn GPS OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
====Force FW upgrade from server====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the FW upgrade from server function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to upgrade the router‘s FW via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Upgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''fw_upgrade'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
====Switch monitoring ON/OFF====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Switch monitoring function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to control monitoring status via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns remote monitoring ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''monitoringon''' to turn remote monitoring ON; '''monitoringoff''' to turn remote monitoring OFF;
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
====Monitoring status====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Monitoring status function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to get monitoring status via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns a text message containing information about remote monitoring status
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''monitoring_status'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
====Switch output ON/OFF====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Switch output function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows output control via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turns specified output ON or OFF
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Active timeout
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Make the rule active for a specific time;
format: '''seconds'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''Example:''' if you configure a rule to turn a specific output on and set a 30 s timeout, the output will activate once the router receives the SMS messages and then it will deactivate after a period of 30 s
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: <b>none</b>
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Output type
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which output will be activated
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
Digital OC output | Relay output; Default: '''Digital OC output'''
|-
|}
 
'''NOTE:''' No default '''SMS text''' is provided for this rule. It can be created via the '''New SMS Rule''' tab.
 
====MORE====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the MORE rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Provides the possibility to see the next part of the message
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns a text message containing the next part of the message
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: <b>more</b>
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
====WOL====
----
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the WOL rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Provides the possibility to wake computers from sleep mode
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Wakes the specified computer from sleep mode
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: <b>none</b>
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | MAC address
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Computer's MAC Address
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values: mac; Default: <b>none</b>
|-
|}
 
'''NOTE:''' No default '''SMS text''' is provided for this rule. It can be created via the '''New SMS Rule''' tab.
 
===Change mobile data settings (cellular) rule===
----
The Change mobile data settings rule is exceptional to most of the other rules as it does not perform a single action like turning specific services On/Off or getting status updates. It designed to change mobile data settings and it's '''SMS text''' can't be described by a single string because the message depends on what configurations you want to change. For example, you can send a message that will change your APN only, you can send a message that will change APN and mobile service mode, or even a message that will change every single mobile setting.
 
{| class="wikitable"
|+ style="text-align: left;" | Change mobile data settings
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the Change mobile data settings function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to change mobile settings via SMS
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Changes the specified mobile settings
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default: '''cellular'''
 
'''Detailed explanations on how to use this function are presented in the table below'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
The default '''SMS text''' for the Change mobile data settings rule is '''cellular''' but it is only an indication text and does not include any specific parameters to be changed. The list of parameters that can be changed and explanations on how to incorporate them into the '''"cellular"''' message is presented in the table below.
 
{| class="wikitable"
|+ style="text-align: left;" | Mobile Settings via SMS parameters
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | PARAMETER
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | VALUE
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DEFAULT MESSAGE EXAMPLE
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | apn=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | e.g., internet.gprs
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets APN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular apn=internet.gprs'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | dialnumber=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | e.g., *99***1#
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets Dialing number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular dialnumber=*99***1#'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | auth_mode=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | none | pap | chap
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets Authentication method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular auth_method=pap'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | service=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | 2gonly | 3gonly | 4gonly | auto
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets the mobile Service mode
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular service=auto'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | username=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | e.g., user
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets the user name for PAP or CHAP authentication
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular username=user'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | password=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | e.g., pass
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets the password for PAP or CHAP authentication
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular password=pass'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | roaming=
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''0''' for OFF; '''1''' for ON
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Turn Mobile data roaming ON or OFF
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''cellular roaming=0'''
|-
|}
 
Each of the above examples contain a single parameter but you can send out multiple parameters in one message. For example, '''"cellular apn=internet.gprs service=3gonly"'''. This message would set your APN to "internet.gprs" and your Service mode to 3G Only. You can also send a message that would include all of the parameters above: '''"cellular apn=internet.gprs dialnumber=*99***1# auth_mode=pap service=3gonly username=user password=pass"'''
 
===UCI API rule===
----
The UCI rule lets you set or get any parameter from the router's configuration files.
 
{| class="wikitable"
|+ style="text-align: left;" | UCI API
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | This check box will enable or disable the UCI API function
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows you to set or get any configurations from the router
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met.
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets or sends you any specified configurations of the router
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text that will trigger the rule
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Default text: '''uci'''
 
'''Detailed explanations on how to use this function are presented in the table below'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization to use for SIM management
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Possible values:
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
|}
 
The following are syntax examples for the UCI API rule:
 
{| class="wikitable"
|+ style="text-align: left;" | UCI API syntax
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | SYNTAX
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DEFAULT MESSAGE EXAMPLE
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | uci get config.section.option"
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns config option value
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''uci get network.wan.ipaddr''' - returns the router's WAN IP address
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | uci set config.section.option="value"
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Sets config option
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''uci set wireless.wifi-iface.key="12345678"''' - sets WiFi interface's password to 12345678
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | uci show config
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns the contents of a config file
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''uci show openvpn''' - returns the contents of the openvpn config file
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | uci show config.section
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Returns the exact part of a config file (either section or the exact option value)
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | '''uci show network.ppp''' - returns the contents of the ppp interface section from the network config file
|-
|}
 
As you can see, the UCI rule requires that you know the names of the configuration files and the names of the sections and parameters that they hold. You can find the config file list and some examples of UCI usage in general in our '''[[UCI command usage]]''' article.
 
===Custom Rules===
----
If default rules do not suit your purposes, you can also configure custom SMS rules. To do so, go to the bottom of the SMS Utilities page, where you will find the '''New SMS Rule''' tab. Select an Action and press the '''Add''' button located next to it.
 
[[Image:Services sms utils new.PNG]]
 
Configuring a new rule is very similar to editing default rules: you are provided with a list of '''Actions''', other fields are generated in accordance with which '''Action''' you choose.
 
==Call Utilities==
 
Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.
 
There is only one default rule (Reboot) configured and it is disabled. To make a new rule click the '''Edit''' button located next to the one default rule or make an entirely new entry for you Call Rules list by adding a rule from the New Call Rule tab.
 
===Call Configuration===
----
The '''Call Configuration''' window is similar to '''SMS Configuration''', but less complex.
 
[[Image:Services sms utils call.PNG]]
 
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes | no; Default: '''no'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allows router's Call rules
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Action
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Reboot | Send status | Switch WiFi | Switch mobile data | Switch output; Default: '''Reboot'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | The action to be performed when this rule is met
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | From all numbers | From group | From single number; Default: '''From all numbers'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Get status via SMS after reboot
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes | no; Default: '''no'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If checked, the router will send a status message once it has rebooted and is operational again
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Message text
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: '''Router name - %rn; WAN IP - %wi; Data Connection state - %cs; Connection type - %ct; Signal Strenght - %ss; New FW available - %fs;'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which status information should be included in SMS:
Data state, Operator, Connection type, Signal Strength, Connection State, IP
|-
|}
 
==User Groups==
 
'''User Groups''' provides you with the possibility to group phone numbers for SMS management purposes. You can then later use these groups in all related SMS and call functionalities. This option helps if there are several Users who should have the same roles when managing the router via SMS or calls. You can create a new user group by entering a name in the '''Group name''' text field and clicking the '''Add''' button located next to it in the '''Create New User Group''' section. After this you will re redirected get to the '''Modify User Group''' section.
 
[[Image:Services sms utils user groups.PNG]]
 
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 500px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
! style="width: 950px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | EXPLANATION, NOTES
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Group name
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Name of the group of phone numbers. Used for easier management purposes
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Phone number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | phone number; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Add numbers to the user group. Must match international format. You can add more phone number fields by clicking on the green ([[Image:Services sms gateway auto reply plus symbol.PNG]]) symbol
|-
|}
 
==SMS Management==
 
With the help of the '''SMS Management''' window you can read and send SMS messages.
 
===Read SMS===
----
In the '''Read SMS''' tab you can read and delete received/stored SMS messages. The layout is simple, there is a list of received SMS messages and you can choose how many entries of that list should visible at one time with SMS per page drop box in the top left corner of the page and there is a Search field to help you navigate more efficiently through the list of messages in the top right corner of the page.
 
[[Image:Services sms utils read.PNG]]
 
===Send SMS===
----
The Send SMS tab lets you send SMS messages from the router‘s SIM card.
 
[[Image:Services sms utils send.PNG]]
 
All you have to do is enter the recipient’s phone number, type in your message and hit the '''Send''' button. If everything went well, a green bar saying  '''Message sent''' should appear (image below).
 
[[Image:Services sms utils sent.PNG]]
 
===Storage===
----
The Storage tab shows you how much SIM card memory space is used and how much is still available. You can also chose the option for the router to not delete messages. If this option is not used, the router will automatically delete all incoming messages after they have been read. Message status '''read/unread''' is examined every 60 seconds. All '''read''' messages are deleted.
 
[[Image:Services sms utils store.PNG]]
 
==Remote Configuration==
 
RUT routers can be configured via SMS from another RUT router. You only have to select which configuration details have to be sent and type in the phone number of the other router. The router will then generate the SMS Text needed for the configurations to be applied.
Total count of SMS is managed automatically. '''You should be aware of the possible number of SMS and use this feature at your own responsibility'''. Generally, it should not be used if you have a high cost per SMS. This is especially relevant if you will try to send a whole OpenVPN configuration, which might accumulate to about 40 SMS messages.
 
===Receive Configuration===
----
This section controls how the configuration initiation party should identify itself.
 
[[Image:Services sms utils receive.PNG]]
 
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | VALUE
! style="width: 579px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Name of the group of phone numbers. Used for easier management purposes
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authorization method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | No authorization | By serial | By router admin password; Default: '''No authorization'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | What kind of authorization will be used to authenticate remote configurations
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Allowed users
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | From all numbers | From group | From single number; Default: '''From all numbers'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | White list of allowed users that can send remote configurations to the router
|-
|}
 
===Send Configuration===
----
This section lets you configure remote RUTxxx devices via SMS. The authorization settings must match those that are set on the receiving party. An example of how sending a new network configuration with both WAN and LAN settings is presented below.
 
[[Image:Services sms utils send config.PNG]]
 
{| class="wikitable"
|+
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | VALUE
! style="width: 579px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Generate SMS
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | New | From current configuration; Default: '''New'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Select whether the configuration will be newly generated or the router's current configuration
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | WAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes | no; Default: '''no'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Select whether to send WAN (Wide Area Network) configurations
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Interface
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Wired | Mobile; Default: '''Mobile'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which interface type will be used for WAN connection on the remote device
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Primary SIM card
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SIM1 | SIM2; Default: '''SIM1'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which SIM card will be used as Primary on the remote device
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Mobile connection
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Use PPP mode | Use NDIS mode | Use NCM mode | Use QMI mode | Use QMI mode used for Quectel EC25-E modem; Default: '''Use PPP mode'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Which mobile connection type will be used on the remote device; select according to the remote device's modem:
'''NDIS''' for Huawei modems
 
'''NCM''' for Telit modems
 
'''QMI''' for Quectel modems
 
'''PPP''' for any modem
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | APN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | APN that will be used on the remote device. APN is the name of a gateway between a GPRS or 3G mobile networks and another computer network, frequently the public Internet. APN is provided by your Internet Service Provider (ISP)
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Dialing number
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Dialing number that will be used on the remote device. A Dialling number is used to establish a mobile PPP connection
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authentication method
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | CHAP | PAP {{!} None; Default: '''None'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Mobile authentication method that will be used on the remote device. Mobile Authentication methods are used to authenticate new connections on your GSM carrier's network
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | User name
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | User name used for new connection authentication with CHAP or PAP authentication methods. This field only becomes visible when you select CHAP or PAP authentication methods.
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Password
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | string; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Password used for new connection authentication with CHAP or PAP authentication methods. This field only becomes visible when you select CHAP or PAP authentication methods.
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Service mode
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | 2G Only | 2G preferred | 3G Only | 3G preferred | 4G (LTE) Only | 4G (LTE) preferred | Automatic; Default: '''3G preferred'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Mobile service mode that will be used on the remote device
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | LAN
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes | no; Default: '''no'''
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | LAN IP address that will be used on the remote device
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | IP address
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | ip; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | LAN IP address that will be used on the remote device
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | IP netmask
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | ip; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | A subnet mask that the remote router will use to define how large the LAN network is
|-
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | IP broadcast
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | ip; Default: " "
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | A logical address at which all devices connected to a multiple-access communications network are enabled to receive datagrams
|-
|}
 
This is an example of only one scenario but you can also send different Network and VPN settings. The settings being sent are the same as they would be configured on your router locally, therefore, you can find information on what different Network and VPN parameters do in [[RUT955 LAN|LAN]], [[RUT955 WAN|WAN]], [[RUT955 Mobile|Mobile]] and [[RUT955 VPN|VPN]] pages of this wiki.
 
==Statistics==
 
The Statistics page represents information about sent and received SMS messages of both SIM cards. The counters can be reset by clicking the '''Reset''' button next to each SIM card.
 
[[Image:Services sms utils statistics.PNG]]
 
[[Category:RUT955 WebUI]]

Latest revision as of 10:54, 9 April 2024

Main Page > EOL Products > RUT955 > RUT955 Manual > RUT955 WebUI > RUT955 Services section > RUT955 Mobile Utilities

The information in this page is updated in accordance with firmware version RUT9_R_00.07.06.16.
Note: click here for the old style WebUI (FW version RUT9XX_R_00.06.09.5 and earlier) user manual page.

Summary

The Mobile Utilities page is used to configure various SMS and Call related device control options and to read, send and manage SMS messages and SMS storage space.

This manual page provides an overview of the Mobile Utilities page in RUT955 devices.

SMS Utilities

The SMS Utilities section contains a list of rules that perform certain actions when they are activated by SMS messages.

The entire list contains more than 20 rules, but it does not include all possible SMS actions. You can also create custom rules or modify existing rules. All possible SMS rule actions, their default SMS texts and descriptions are listed in the table below.

Action SMS Text Description
Change I/O state ioset Changes the state of a selected output.
Change mobile settings cellular Is used to configure the device's mobile data connection. Click here for more information on this rule.
Change profile no default text Is used to change profiles on the device. Include the name of the profile that you wish to change to after the rule's SMS text, for example if SMS text is set to changeprof:
  • changeprof default
  • changeprof custom
Execute custom script - Executes a custom shell script.
Force SIM switch switch_sim Switches from using one SIM card to another.
Reset moble connection reset_conn Resets mobile connection. Useful when you want to reconnect to the best available operator.
Reload config config_reload Reloads the config and all affected services.
FW upgrade from server fw_upgrade Upgrades the device's firmware (provided a new version is available on the FOTA server).
Get list of profiles profdisp Sends a list of configuration profiles existing on the device.
GPS control gpson Turns GPS on.
GPS coordinates gps Sends the device's current GPS coordinates.
IP unblock ipunblock Unblocks Web/SSH access for devices that were blocked for too many unsuccessful connection attempts. Send the SMS text to unblock all blocked devices or include the IP address of a single blocked device after the SMS text. For example:
  • ipunblock - clears the block list (unblocks Web/SSH access for all previously blocked devices).
  • ipunblock 192.168.1.2 - removes this IP address from the block list (unblocks Web/SSH access for that device).
I/O status iostatus Sends a status report message on the state of the device's inputs and outputs.
Manage OpenVPN vpnon Turns a selected OpenVPN instance on. Include the name of the OpenVPN instance that you wish to turn on after the rule's SMS text:
  • vpnon client_name
  • vpnon server_name
Manage OpenVPN vpnoff Turns a selected OpenVPN instance off. Include the name of the OpenVPN instance that you wish to turn off after the rule's SMS text:
  • vpnoff client_name
  • vpnoff server_name
Mobile Data limit status no default text Sends a status report message that includes data limit usage information for mobile network interfaces (that have Mobile Data Limit enabled)
Mobile Data usage reset no default text Resets mobile data usage for specified interface.
Monitoring status monitoring_status Sends a status report message that includes the RMS connection type, state and the device serial number and MAC address.
More more Displays next part of a composite response message (more than 160 characters).
OpenVPN status vpnstatus Sends a status report message on all OpenVPN connections.
Reboot reboot Reboots the device.
Restore to default restore Restores factory settings on the device.
RMS action rms_on Turns RMS connection on.
RMS action rms_off Turns RMS connection off.
RMS connect rms_connect Forces the device to connect to RMS. This action is analogous to clicking the 'Connect' button in the Cloud Solutions → RMS page.
RMS status rms_status Sends a status report message on the state of the connection to RMS.
Send status status Sends a status report message.
SSH access control sshon Turns remote and local (by default) SSH access on. This rule can be modified to only include local SSH access.
SSH access control sshoff Turns SSH access off.
Switch mobile data mobileon Turns mobile data usage on.
Switch mobile data mobileoff Turns mobile data usage off.
Switch WiFi wifion Turns the WiFi radio on.
Switch WiFi wifioff Turns the WiFi radio off.
UCI API uci Is used to change the configuration settings on the device. Click here for more information on the UCI API rule.
Restore to user's defaults userdefaults Restores user's default configuration on the device. Click here for more information on User's default configuration.
Wake on LAN wakeup Sends a magic packet that "wakes up" a specified device from standby mode. If you have multiple Wake-on-LAN-capable devices, you will have to create a separate rule with a different SMS text for each one. Configuration for each device must include the MAC address of that device.
Web access control webon Turns remote and local (by default) HTTP and HTTPS access on. This rule can be modified to only include local HTTP/HTTPS access.
Web access control weboff Turns HTTP and HTTPS access off. This rule can also modified to turn of either HTTP or HTTPS separately.
API api Is used to change the configuration settings on the device. Click here for more information on the UCI API rule.

SMS rule execution syntax


To execute an SMS rule, send an SMS message to your device's SIM card number with the rule's SMS Text preceded by the selected authorization keyword, which depends on the selected authorization method:

  • No authorization - no special keyword required; simply send a rule's SMS Text. For example, to execute the reboot rule without authorization:
    reboot
  • By serial - include the device's serial number before a rule's SMS Text. For example, to execute the iostatus rule with serial authorization:
    1111111111 iostatus
    (replace 1111111111 with your device's serial number)
  • By device admin password - include the device's password before a rule's SMS Text. For example, to execute the vpnon rule with admin password authorization:
    admin01 vpnon
    (replace admin01 with your device's admin password)
  • By password - include the configured custom password before a rule's SMS Text. For example, to execute the sshon rule with password authorization:
    Custompw1 sshon
    (replace Custompw1 with your configured custom password)

Modify SMS Rule


Every SMS rule can be edited to your liking. To begin configuring a rule, click the click the 'Edit' button located next to it:

After this you should redirected to configuration page for that rule. Below are examples of what the configuration page for the reboot rule looks like.

General settings


  1. The Enable slider turn the rule on or off. In order to use a rule, this slider must be set to 'on'. By default, all existing SMS rules are turned on.
  2. The Action dropdown selection specifies which action should be performed when the rule is executed.
  3. The SMS text field specifies the text that will trigger the rule upon receiving a message.
  4. The Get status via SMS after reboot slider specifies whether the device should send a status report message after an action is executed. The name of this slider may differ from rule to rule and it is only available for some rules.
  5. The Message forwarding slider specifies whether the device should send a status report message to another number (besides the original sender). Setting this slider to 'on' will prompt you to enter an additional phone number(s) of the status message recipient(s).
  6. The Text messagetext box is used to modify the text that should be included in an SMS rule's response message.

Authorization


  1. The Authorization method dropdown selection specifies the type of authorization an SMS rule requires (device admin password, serial number, password or none). If By password is selected a Password field will appear and a custom password will be required. A custom password must have at least one uppercase letter, one lowercase letter, one number and must be from a minimum of 8 to a maximum of 80 characters in length.
  2. The Allowed number(s) dropdown selection specifies who can execute an SMS rule (based on phone number).

Most rules are configured in a similar manner. However, the configuration does differ from rule to rule, depending on a rule's purpose (selected 'Action'). If you run into trouble when configuring a rule, hover your mouse cursor over the name of a field to see a hint that explains what that field does.

Change mobile settings (cellular) rule


The Change mobile settings rule is used to change the configuration settings of the mobile data connection. The usage of this rule is a bit more complex because the SMS text in and of itself does nothing, as you must also specify the parameters and values that you wish to set. For example, you can send a message that will change your APN only or a message that will change multiple parameters at once.

Below is the full list of parameters that can be changed with this rule.

Parameter Description SMS text example
apn= Sets APN. cellular apn=internet
auto_apn= Turns auto APN on or off. Possible values are 0/1. cellular auto_apn=1
dialnumber= Sets Dialing number. cellular dialnumber=*99***1#
auth_mode= Sets the authentication method. Possible values are:
  • none
  • pap
  • chap
cellular auth_method=pap
service= Sets the service mode. Possible values are:
  • 2g
  • 3g
  • lte
  • mixture of any two modes (ex.: 3g_lte)
  • auto
cellular service=auto
username= Sets the user name for PAP or CHAP authentication. cellular username=user
password= Sets the password for PAP or CHAP authentication. cellular password=pass
roaming= Turns mobile data roaming on or off. Possible values are:
  • 0 - for off.
  • 1 - for on.
cellular roaming=0

Each example above contains a single parameter but you can also send out multiple parameters in one message. For example:

cellular apn=internet service=3g

This message would set your APN to "internet" and the service mode of the mobile connection to "3G Only". You can also send a message that would include all of the parameters above:

cellular apn=internet auth_mode=pap service=3g username=user password=pass roaming=0

Note: only "apn=" or "auto_apn=" is required in a message. For example, to set custom APN:

cellular apn=internet

or if you want to turn auto APN on:

cellular auto_apn=1

UCI API rule


The UCI API rule is used to configure any parameters on the device.


The following are syntax examples for the UCI API rule:

Structure example Description SMS text example
uci get <config>.<section>.<option_name> Returns the value of a single configuration option.
  • uci get network.wan.ipaddr
Returns the router's WAN IP address.
uci set <config>.<section>.<option_name>="value" Sets the value of a specified configuration option.
  • uci set network.mobile.apn=example
Changes mobile APN value to "example".
uci show <config> Returns the contents of a config file
  • uci show openvpn
Returns the contents of the "openvpn" config file.
uci show <config>.<section> Returns the exact part (section) of a config file.
  • uci show network.lan
Returns the configuration of the "lan" section from the "network" config file.

The UCI rule requires that you know the names of the configuration files and sections and parameters contained within them. You can find the config file list and some examples of the UCI system usage in our UCI command usage article.

Disclaimer: do not enclose values in escape characters like you would when executing UCI commands via CLI. For example: uci set network.mobile.apn="example" will cause an error in SMS API and your value will be altered, as a result, UCI commands execution will fail. Instead, simply write uci set network.mobile.apn=example without any escape characters or quotes.

API rule


API allows creating, reading, updating, or deleting configurations using the allowed API endpoints from a list.


The following are syntax examples for the API rule:

Structure example Description SMS text example
api get <method>.<config>.<section> Returns specified config options.
  • api get /auto_reboot/scheduler/config
Returns periodic reboot options.
api post<method> <config>.<section>.<option_name>="value" Sets the value of a specified configuration option.
  • api post /auto_reboot/scheduler/config {"data": {"action": "1", "period": "week", "days": ["mon"], "time": ["12:00"]}}
Creates a periodic reboot configuration with options to reboot device every monday on 12:00.
api put <method> <config>.<section>.<option_name>="value" Edits a specified config options.
  • api put /auto_reboot/scheduler/config/{id} {"data": { "enable": "1"}}
Sets a specified periodic reboot config to enabled.
api delete <method> <config>.<section>.<config_id> Deletes a specified configuration.
  • api delete /auto_reboot/scheduler/config/{id}
Deletes a specified periodic reboot configuration.

Custom Rules


If none of the default rules suit your purposes, you can also configure custom ones. To do so, scroll down to the very bottom of the SMS Utilities page, where you will find the Add Rule section. Enter a custom SMS text, select an Action and click the 'Add' button:

SMS Gateway

This section provides a summary of the SMS Gateway functions for RUT955 devices.

Post/Get


Post/Get allows you to perform action requests by writing them in the URL after your device’s IP address.

Field Value Description
Enable off | on; default: off Enable SMS management functionality through POST/GET
Access mobile_data | mobile_sim_pin | sms_delete | sms_list | sms_read | sms_send | sms_total; default: mobile_data, sms_delete, sms_list, sms_read, sms_send, sms_total Methods available for Post/Get. All methods are allowed if this list is left empty.
User name default: user1 User name used for authorization (5 characters minimum). Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )
Password default: user_pass Password used for authorization (5 characters minimum). Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )

Use a web browser or any other compatible software to send HTTP post/get strings to the router. The router must be connected to a GSM network when using the Send SMS feature. Below you will find a table with possible actions and examples on how to use them:

Action Post/get URL examples
View mobile messages list http://192.168.1.1/cgi-bin/sms_list?username=user1&password=user_pass
Read mobile message http://192.168.1.1/cgi-bin/sms_read?username=user1&password=user_pass&number=1
Send mobile message to a single number http://192.168.1.1/cgi-bin/sms_send?username=user1&password=user_pass&number=0037060000001&text=testmessage
Send mobile message to a group http://192.168.1.1/cgi-bin/sms_send?username=user1&password=user_pass&group=group_name&text=testmessage
View mobile messages total http://192.168.1.1/cgi-bin/sms_total?username=user1&password=user_pass
Delete mobile message http://192.168.1.1/cgi-bin/sms_delete?username=user1&password=user_pass&number=1
  • 192.168.1.1 - router's IP address. (Replace it with your LAN IP or WAN IP (when connecting remotely))
  • SMS related post/get commands. Possible values are:
    • sms_list - view all SMS messages in storage
    • sms_read - read a single SMS message by specified SMS index (number)
    • sms_send - send an SMS message to specified recipient
    • sms_total - display SMS storage statistics
    • sms_delete - delete a single SMS message by specified SMS index (number)
  • & - separation symbol. After specifying the SMS command, other parameters must be separated by an ampersand (&) symbol
  • username - SMS post/get configuration user name
  • password - SMS post/get configuration password
  • number - SMS message index or (depending on context) recipient's phone number. SMS message indexes can be viewed with the sms_list command.
    Correct phone number format is:
    • 00 - number must be preceded by two zeros
    • <country_code> - the next following element is the number holder's country code
    • <receivers_number> - phone number of the recipient
           For example, a valid number would be 0037012345678 (370 is country code and 12345678 is the receiver's
           phone number, all preceded by 00)
    
  • text - SMS message text

To use Post/Get via SSH instead of a browser, you may want to use the curl -X command. Simply add the same URL command in between quotes and specify the HTTP method.

Examples:

  • View SMS list:
    curl -X GET "http://192.168.1.1/cgi-bin/sms_list?username=user1&password=user_pass"
  • Send SMS:
    curl -X GET "http://192.168.1.1/cgi-bin/sms_send?username=user1&password=user_pass&number=0037000000000&text=testmessage"

Auto Reply


Auto reply allows you to configure automatic replying to SMS messages that the router receives.

Field Value Description
Enable off | on; default: off Toggles Auto Reply ON or OFF
Reply SMS-Utilities rules off | on; default: off It will reply to sms rules, from SMS-Utilities
Don't save received messages off | on; default: off If enabled, the router will delete received SMS messages
Mode default: Everyone Specifies whether to auto reply to every phone number or just just specified phone numbers. Available options:
  • Everyone
  • Listed numbers
  • From user group
Message text default: none The message that will be sent in reply

SMS Forwarding


This section is a summary of the SMS Forwarding function in RUT955 routers.

SMS Forwarding To HTTP


The SMS Forwarding To HTTP functionality forwards SMS messages to HTTP, using either POST or GET methods.

Field Value Description
Enable off | on; default: off Enable/disable SMS forwarding to HTTP
Forward SMS-Utilities rules off | on; default: off Enable/disable sms-utilities rules forwarding
Don't save received message off | on; default: off Select whether you want to save forwarded messages or not
Include sender's number off | on; default: off Enable/disable adding original message sender phone number at the end of message text
Mode default: Everyone Specifies whether to auto reply to every phone number or just just specified phone numbers. Available options:
  • Everyone
  • Listed numbers
  • From phone group
Encode message text to Base64 off | on; default: off Message text will be encoded to a Base64 string. Enable this to preserve Unicode characters in the message text.
HTTPS certificate verification default: Ignore Select whether to ignore or verify server certificate. Available options:
  • Ignore
  • Verify
Method default: Get Choose witch HTTP request method will be used. Available options:
  • Get
  • Post
URL default: none URL to which message is going to be forwarded
Number value name default: none Sender phone number code name for query string name/value pair
Message value name default: none Message code name for query string name/value pair
Extra data pair 1 default: none Extra html query name/value pair. Enter name to the left field and value to right
Extra data pair 2 default: none Extra html query name/value pair. Enter name to the left field and value to right

SMS Forwarding To SMS


The SMS Forwarding To SMS function forwards SMS messages to one or several recipients.

Field Value Description
Enable off | on; default: off Enables/disables SMS forwarding to SMS
Forward SMS-Utilities rules off | on; default: off Enable/disable sms-utilities rules forwarding
Don't save received message off | on; default: off Select whether you want to save forwarded messages or not
Add sender's number off | on; default: off Enable/disable adding original message sender phone number at the end of message text. Only added if total message length is up to 480 characters
Mode default: Everyone Specifies whether to auto reply to every phone number or just just specified phone numbers. Available options:
  • Everyone
  • Listed numbers
  • From user group
Recipients phone numbers default: none Number(s) to which received messages will be forwarded to

SMS Forwarding To Email


The SMS Forwarding To Email function forwards SMS messages to email.

Field Value Description
Enable off | on; default: off Enables/disables SMS forwarding to Email
Forward SMS-Utilities rules off | on; default: off Enables/disables sms-utilities rules forwarding
Don't save received message off | on; default: off Select whether you want to save forwarded messages or not
Include sender's number off | on; default: off Enable/disable adding sender phone number at the end of email text body
Mode default: Everyone Specifies whether to auto reply to every phone number or just just specified phone numbers. Available options:
  • Everyone
  • Listed numbers
  • From user group
Subject default: none Subject of an email. Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )
Sender's email account default: none Sender's email configuration
Recipient's email address default: none For whom you want to send an email to. Allowed characters (a-zA-Z0-9._%+-)

Email To SMS Forwarding


Email to SMS Forwarding is a function that connects to your email account and checks its inbox at the specified frequency. If it finds any new received emails with a specific subject (phone number in email subject), it sends the body of the email as an SMS message(s) to the recipient specified in the email subject field.

Important note: all POP3 server email messages from inbox will be deleted when using this service.

Field Value Description
Enable off | on; default: off Turns Email to SMS Forwarding ON or OFF
POP3 server host | ip; default: none Email service provider's POP3 server address (can be looked up online)
Server port integer [0..65535]; default: none Email service provider's POP3 server port (can be looked up online)
User name string; default: none Email account user name. This is information is used by router in order to atuhenticate itself when connecting to the email client
Password string; default: none Email account password. This is information is used by router in order to atuhenticate itself when connecting to the email client
Secure connection (TLS) off | on; default: off Enables/diables secure connection (TLS 1.2 and up). TLS (Transport Layer Security) is a cryptographic protocol designed to provide communications security over a computer network. TLS uses a combination of symmetric cryptography (sigle secret key known to both sender and receiver to encrypt data) and asymmetric cryptography (a public key known to everyone and a private or secret key known only to the recipient of the message) to encrypt data.
Verify TLS certificate validity off | on; default: off Enables/disables TLS certificate validation. When enabled verifies the validity of the POP3 server certificate
SMS PDU limit integer; default: 5 Longer email text will be sent in multiple PDUs (Protocol Data Units), each of them is approximately 130 characters. Specify maximum allowed PDU count
Check email every time; default: 1 minute Email inbox check interval
Interval Minutes | Hours| Days; default: Minutes Email inbox check interval

Additional note: you may have noticed that there is no option where you can specify the recipient's phone number. As mentioned earlier, Email to SMS doesn't forward all emails, only the ones that are meant to be forwarded. Only emails with the recipient's phone number in the subject will be forwarded to SMS

Correct phone number format is:

  • 00 - number must be preceded by two zeros
  • <country_code> - the next following element is the number holder's country code
  • <receivers_number> - phone number of the recipient

For example, a valid number would be 0037012345678 (370 is country code and 12345678 is the receiver's phone number, all preceded by 00)

Recommendations note:

  • Email to SMS application can't guarantee best results when working with flooded email inbox. It is recommended to have less than 100 emails in the inbox.
  • Less emails - better performance.
  • In most cases it is best to use dedicated inbox.

SMPP


Short Message Peer-to-Peer (SMPP) is a protocol used for exchanging SMS messages between Short Message Service Centers (SMSC) and/or External Short Messaging Entities (ESME). It supports both IPv4 and IPv6 addresses. The figure below is an example of the SMPP section and the table below provides information on the configuration fields contained in that section:

Field Value Description
Enable off | on; default: off Turns SMPP on or off.
User name string; default: admin User name used for authentication on the SMPP server.
Password string; default: admin01 Password used for authentication on the SMPP server.
Server port integer [0..65535]; default: 2775 SMPP server port.

Call Utilities

Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.

Note: Devices with EC25-AFxD (where x is any character) modem do not support voice calls. Call Utilities section is not present on devices with these modems. You can find the module present on your device in RUT955 System page.

Call Rules


To create a new rule, select an 'Action' and click the 'Add' button. After this, a new configuration window should appear.


Incoming Calls


This option specifies the action to be performed on incoming calls. Call utilities rules will keep getting executed while the call is active.

Messages

With the help of the Messages window you can read and send SMS messages.

Read Messages


In the Read Messages section you can read and delete received/stored SMS messages. The layout is simple, there is a list of received SMS messages and you can choose how many entries of that list should be visible at one time with SMS per page drop box in the top left corner of the page and there is a Search field to help you navigate more efficiently through the list of messages in the top right corner of the page.

Send Messages


The Send Messages section lets you send SMS messages from the router‘s SIM card.

All you have to do is enter the recipient’s phone number, type in your message and hit the Send button.

Storage


In the Storage tab you can find settings associated with message storage.

Field Value Description
Save messages to SIM card | Modem storage; default: SIM card Specify location where to save messages
Memory - Information about used/available SIM card memory
Leave free space integer; default: 5 How much memory (number of messages) should be left free