Domnev: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
 
(328 intermediate revisions by the same user not shown)
Line 1: Line 1:
<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.08'''] firmware version .</p>
__TOC__
==Summary==
==Summary==
This article contains instructions on how to send M-Bus data to the server using various protocols.


This chapter is a guide on configuring cobot.me provider '''hotspot''' instance on RUTX routers.
==Configuration overview & prerequisites==
Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites that make it possible.


'''Prerequisites''':
* TRB143;
* M-Bus device;
* Server;
* An end device (PC, Laptop, Tablet, Smartphone) for configuration;


If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should '''turn on "Advanced WebUI" mode'''. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
| series = RUTX
}}


[[File:Networking_{{{series}}}_manual_webui_basic_advanced_mode.gif|border|class=tlt-border]]
==Adding M-Bus devices==
The '''[[TRB143_M-Bus|M-Bus Settings]]''' section is used to configure the general service functionality. To set up a new M-Bus instance, go to '''Services → M-Bus → Client'''. Add a new device to the configuration press [[File:Add Button.png|60x90px]] button which is shown below.


==Step 1: cobot.me configuration ==
[[File:Mbus adding new device.png||border|class=tlt-border]]
===Login===
 
===Device configuration===
----
----
First, go to '''cobot.me''' and log into your account ('''LOG IN''' in the top right corner). If you don't have a registered account then you need to create one - click '''TRY COBOT'''.
You will be granted to a new window. Configure your M-Bus device accordingly:
[[File:Cobotlogin.png|border|center]]
 
====Sign Up====


After clicking '''SIGN UP''' you will be redirected to register page. Enter you account information and click '''Next'''.
# '''Name''': Enter the desired name of the M-Bus device
# '''Address type''': select which M-Bus address will be used
# '''Primary/Secondary address''': specify M-Bus address


[[File:Register1Cobot.png]]
[[File:Mbus adding new device configuration v3.png|border|class=tlt-border]]


Next step is to enter further information of your account. After entering it click '''Add Space'''.
Test if the M-Bus device is reachable by a specified primary/secondary address. To do so click on [[File:Ping_device_option_mbus.png|110x110px]]. You might get on of two outputs:


[[File:Register2Cobot.png]]
* If you have specified correct primary/secondary address, you will receive:
[[File:Mbus device pingable v2.png|border|class=tlt-border|300px]]


* If you have specified incorrect primary/secondary address, you will receive (if you do not know what address should be used, refer to the Scanning for available M-Bus devices (PRIDET URL) secion:
[[File:Mbus device not pingable v2.png|border|class=tlt-border|300px]]


Once finished, save the configuration by clicking [[File:Savenapply button.png|Savenapply button.png]].


===Set Up new radius server===
===Scanning for available M-Bus devices===
----
----
In the opened window click '''SETUP''' icon, then - '''Wifi Integration'''. You will be prompted to '''Radius Wifi Integration''' window.


[[File:ClickWifi.png]]
If you are not sure what address your M-Bus devices have, you can try scanning for the available M-Bus devices. To do so click on [[File:Scan button.png]] button.


Click the '''Set up Radius Server''' button in the bottom right corner.
====Scan settings====
----
You will be granted to a new window. Configure scan settings accordingly:


[[File:ClickRadius.png]]
# '''Scan type''': select which M-Bus address will be scanned
# '''Scan range''': From what M-Bus address scanning will start and M-Bus address until scanning will be performed.
[[File:Mbus scan.png|border|class=tlt-border]]


===Network details===
To start the scan click on [[File:Start scan button.png]] button.


You will be given your Radius server configuration data that you will need in the next step.
====Found devices====
----
Once the scan is finished you should see the list of M-Bus devices that TRB143 were able to find:


[[File:RadiusDetails.png]]
[[File:Mbus scanned devices add.png|border|class=tlt-border]]


===Add Wifi Guest Accounts===
You can either [[File:Pencil2.png]] '''(1)''' M-Bus devices primary address or [[File:Add Button.png|60x90px]] '''(2)''' to the M-Bus devices list.


Click '''Wifi Guest Accounts''' in the bottom of the page to add accounts to let users access your wifi.
==Gathering M-Bus data==


[[File:ClickUsersAcc.png]]
If the device successfully added to the list, under the General settings you should see that the Status changes to <span style="color:green">Active</span>.


Type user account information and click '''Add Account'''.
[[File:Mbus status active v2.png|border|class=tlt-border]]


[[File:ClickAddUser.png]]
===Data collecting groups===
----
To reach data collecting groups configuration press [[File:Pencil2.png]] button. [[File:Add Button.png|60x90px]] button lets you to create a new instance.


At the bottom of the page you can see all your created users.
[[File:Mbus data collect overview.png|border|class=tlt-border]]


[[File:AllUsers.png]]
====Data collecting group instance====
----


==Step 2: Router configuration ==
Each data collection group contains the following information. Configure device accordingly:


===Log in===
# '''Enabled''': on
# '''Name''': desired name of the instance
# '''Period''': desired time duration between data retrievals
# '''Data type''': desired data type to process the received data. Depending on your needs you can select between 5 different data types: '''JSON, XML, ASCII, Hexadecimal''' and '''Binary'''.


Open your RUT9XX homepage. That can be done by entering 192.168.1.1 in your internet browser's URL bar and log in with your credentials - the default credentials are '''admin''' as Username and '''admin01''' as Password (the address can different - depending if you changed it or not).
[[File:Mbus data collect group v2.png|border|class=tlt-border]]


===Set up wireless===
You can check if your configuration works accordingly by pressing the [[File:Mbus test button.png]] button. You should see the data in a pop-up field:


If you have already set up your wireless access point - skip this step.
[[File:Mbus TEST output.png|border|class=tlt-border]]


Open the wireless configuration panel by clicking '''Network → Wireless'''
====Group values====
----
To reach group values configuration press [[File:Pencil2.png]] button:


[[File:ClickWireless.png]]
[[File:Mbus edit group values.png|border|class=tlt-border]]


Click '''Add'''
There you can adjust additional settings:


[[File:ClickAddWireless.png]]
# '''Enable''': Enable/disable data group value.
# '''FCB toggle''': FCB (Frame Count-Bit), one-bit counter for reliable server-client communication.
# '''Manufacturer information''': Select to include manufacturer information in the payload.
# '''Selected parameters''': Select to include the all parameters saved from device, or a custom subset of them. If the custom is selected you can specify '''frame''', '''record''' numbers and also a '''paramater'''


Check the '''Enable wireless''' checkbox, enter router's '''SSID''' and for the safety purpose click '''Wireless Security'''.
[[File:Mbus device groupsa.png|border|class=tlt-border]]


[[File:SetUp1Wireless.png]]


Choose your '''Encryption''', enter the '''Key''' and click '''Save'''.
==Sending data to the server==
The '''[[TRB143_Data_to_Server|Data to Server]]''' feature provides you with the possibility to set up data senders that collect data from various sources and periodically send it to remote servers. This section will walk you through configuring the Data to Server to send M-Bus data to the desired HTTP or MQTT server.


[[File:SetUp2Wireless.png]]
===Data to Server configuration===
----
To set up Data to Server, navigate to Services → Data to Server. Enter desired name of the instnace and hit [[File:Add Button.png|60x90px]] button which is shown below.


===Set up hotspot===
[[File:Mbus data to server create.png|border|class=tlt-border]]


Open the hotspot configuration panel by clicking '''Services → Hotspot'''
===Data configuration===
----


[[File:ClickHotspot.png]]
Each data collection group contains the following information. Configure device accordingly:


Click '''Edit'''
# '''Name''': desired name of the instance
# '''Type''': M-Bus data
# '''Format''': custom or JSON depending on a need.


[[File:ClickHotspotEdit.png]]
[[File:Mbus data to server configuration.png|border|class=tlt-border]]


Use configuration details from '''Step 1'''.


Check '''enable''' box
Once finished configuring Data configuration tab click on [[File:Mbus data to server collection edit.png|160x160px]] button.


Select '''External radius''' from '''Authentication mode''' dropbox
===Collection configuration===
----


Select '''PAP''' from '''Authentication protocol''' dropbox
[[File:Mbus data to server collection configuration.png|border|class=tlt-border]]


Type configuration details '''RADIUS Server''', '''Authentication port''', '''Accounting port''' and '''Radius secret key'''
Once finished configuring Collection configuration tab click on [[File:Mbus data to server server button.png|160x160px]] button.


And click '''Save'''
===Server configuration===
----
This section contains information on how to configure MQTT and HTTP servers information.


[[File:HotspotSettings.png]]
====HTTP configuration====
----


==Test your Hotspot==
# '''Type''': HTTP
# '''Server address''': desired server address


Try connecting to your router using computer or mobile phone.
'''Note''': not specified fields are optional.


Select your router.
[[File:Mbus data to server HTTP configuration.png|border|class=tlt-border]]


[[File:FindRouters.png|400px]]
====MQTT configuration====
----


After successful connection visit any website. You should be redirected to hotspot login page.
# '''Type''': MQTT
# '''Server address''': desired server address
# '''Topic''': MQTT topic to be used for publishing the data.


Type your username and password.
'''Note''': not specified fields are optional.


Click '''Login'''
[[File:Mbus data to server MQTT configuration.png|border|class=tlt-border]]


[[File:LoginToYourRouter.png|400px]]
Once finished configuring Server configuration tab click on [[File:Savenapply button.png|Savenapply button.png]] button.


You should see a message '''Authorization Successful'''
===Results===
 
----
[[File:HotspotSuccesss.png|400px]]


==External links==
[[File:Mbus data received v2.png|border|class=tlt-border]]
http://www.cobot.me


[[Category:IoT]]
'''Note''': received data formating depends on the settings you apply under Data to Server and M-Bus configurations.

Latest revision as of 07:20, 25 October 2024

The information on this page is updated in accordance with the 00.07.08 firmware version .

Summary

This article contains instructions on how to send M-Bus data to the server using various protocols.

Configuration overview & prerequisites

Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites that make it possible.

Prerequisites:

  • TRB143;
  • M-Bus device;
  • Server;
  • An end device (PC, Laptop, Tablet, Smartphone) for configuration;

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Adding M-Bus devices

The M-Bus Settings section is used to configure the general service functionality. To set up a new M-Bus instance, go to Services → M-Bus → Client. Add a new device to the configuration press button which is shown below.

Device configuration


You will be granted to a new window. Configure your M-Bus device accordingly:

  1. Name: Enter the desired name of the M-Bus device
  2. Address type: select which M-Bus address will be used
  3. Primary/Secondary address: specify M-Bus address

Test if the M-Bus device is reachable by a specified primary/secondary address. To do so click on . You might get on of two outputs:

  • If you have specified correct primary/secondary address, you will receive:

  • If you have specified incorrect primary/secondary address, you will receive (if you do not know what address should be used, refer to the Scanning for available M-Bus devices (PRIDET URL) secion:

Once finished, save the configuration by clicking Savenapply button.png.

Scanning for available M-Bus devices


If you are not sure what address your M-Bus devices have, you can try scanning for the available M-Bus devices. To do so click on button.

Scan settings


You will be granted to a new window. Configure scan settings accordingly:

  1. Scan type: select which M-Bus address will be scanned
  2. Scan range: From what M-Bus address scanning will start and M-Bus address until scanning will be performed.

To start the scan click on button.

Found devices


Once the scan is finished you should see the list of M-Bus devices that TRB143 were able to find:

You can either (1) M-Bus devices primary address or (2) to the M-Bus devices list.

Gathering M-Bus data

If the device successfully added to the list, under the General settings you should see that the Status changes to Active.

Data collecting groups


To reach data collecting groups configuration press button. button lets you to create a new instance.

Data collecting group instance


Each data collection group contains the following information. Configure device accordingly:

  1. Enabled: on
  2. Name: desired name of the instance
  3. Period: desired time duration between data retrievals
  4. Data type: desired data type to process the received data. Depending on your needs you can select between 5 different data types: JSON, XML, ASCII, Hexadecimal and Binary.

You can check if your configuration works accordingly by pressing the button. You should see the data in a pop-up field:

Group values


To reach group values configuration press button:

There you can adjust additional settings:

  1. Enable: Enable/disable data group value.
  2. FCB toggle: FCB (Frame Count-Bit), one-bit counter for reliable server-client communication.
  3. Manufacturer information: Select to include manufacturer information in the payload.
  4. Selected parameters: Select to include the all parameters saved from device, or a custom subset of them. If the custom is selected you can specify frame, record numbers and also a paramater


Sending data to the server

The Data to Server feature provides you with the possibility to set up data senders that collect data from various sources and periodically send it to remote servers. This section will walk you through configuring the Data to Server to send M-Bus data to the desired HTTP or MQTT server.

Data to Server configuration


To set up Data to Server, navigate to Services → Data to Server. Enter desired name of the instnace and hit button which is shown below.

Data configuration


Each data collection group contains the following information. Configure device accordingly:

  1. Name: desired name of the instance
  2. Type: M-Bus data
  3. Format: custom or JSON depending on a need.


Once finished configuring Data configuration tab click on button.

Collection configuration


Once finished configuring Collection configuration tab click on button.

Server configuration


This section contains information on how to configure MQTT and HTTP servers information.

HTTP configuration


  1. Type: HTTP
  2. Server address: desired server address

Note: not specified fields are optional.

MQTT configuration


  1. Type: MQTT
  2. Server address: desired server address
  3. Topic: MQTT topic to be used for publishing the data.

Note: not specified fields are optional.

Once finished configuring Server configuration tab click on Savenapply button.png button.

Results


Note: received data formating depends on the settings you apply under Data to Server and M-Bus configurations.